Categories

Best Pneumatic Tool Oil

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

BOSTITCH Pin Nailer, 23 Gauge, 2-Inch (BTFP2350K)

  • Drive 23 GA, 2-inch nails recessed into oak and other dense wood with this pneumatic nailer.
  • Tool-free jam release mechanism for easy nail removal.
  • Tool-free depth adjustment for easy depth control.
  • Oil-free operation reduces risk of oil stains on work surface.
  • Low nail lockout with bypass alerts for when to reload.
  • Uses 23 GA headless pin nails from 5/8-inch to 2-inch length.
  • Reversible belt hook for easy carrying on the jobsite.
Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • ...l, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
  • Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
  • Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
  • 3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.
Check Stock

Stanley Bostitch HP118K Pin Nailer Replacement 2 Pack Driver Unit # G0313700-2PK

  • Drive 23 GA, 2-inch nails recessed into oak and other dense wood with this pneumatic nailer.
  • Tool-free jam release mechanism for easy nail removal.
  • Tool-free depth adjustment for easy depth control.
  • Oil-free operation reduces risk of oil stains on work surface.
  • Low nail lockout with bypass alerts for when to reload.
  • Uses 23 GA headless pin nails from 5/8-inch to 2-inch length.
  • Reversible belt hook for easy carrying on the jobsite.
Check Stock

Campbell Hausfeld Oil Tool 8 Ounces (ST127012AV)

  • Ideal for the maintenance of all oil lubricated pneumatic tools.
  • Use daily by applying several drops in tool air inlet.
  • Specially formulated to maximize tool performance.
  • Finish your projects faster and easier with Campbell Hausfeld - The Air Power Expert.
Check Stock

CRAFTSMAN Finish Nailer, 18GA, Pneumatic (CMPBN18K)

  • MAINTENANCE FREE: The pneumatic nailer has oil-free motor for maintenance-free operation.
  • EASY JAM CLEARING: Tool-free jam release mechanism for easy jam clear.
  • PROPER NAIL ADJUSTMENT: Tool-free depth-of-drive adjustment for proper setting of nail heads.
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock

CRAFTSMAN Finish Nailer, 16GA, Oil Free Pump, Pneumatic (CMPFN16K)

  • MAINTENANCE FREE: Pneumatic nailer has the Oil-free motor for maintenance-free operation.
  • EASY JAM CLEARING: Tool-free jam release mechanism of the 16 gauge finish nailer is designed for easy jam clear.
  • PROPER NAIL ADJUSTMENT: Tool-free depth-of-drive adjustment for proper setting of nail heads.
Check Stock

Arrow PT18G 18 Gauge Oil-Free Pneumatic Brad Nailer

  • Works with Arrow brad nails of all sizes.
  • Tool-free jam release mechanism for easy nail removal in the event of a jam.
  • Low nail indicator window lets users know when the slide-load magazine is nearing empty.
  • Exhaust cover allows you to direct exiting air flow.
  • Unlike other pneumatic tools, the PT50 does not require oil for maintenance.
  • Contact safety feature requires contact with nailing surface before firing to prevent misfires.
  • Operates on most air compressors up to 120 PSI (recommneded use between 60 to 100 PSI).
Check Stock

Chicago Pneumatic CP835 Heavy Duty Air Nibbler - Pneumatic Nibbler with Four Different Cutting Positions. Shears and Nibblers

  • Heavy-Duty Nibbler Tool: air nibbler is ergonomically designed for precise cutting of steel and aluminum metal. Pneumatic nibbler is a perfect tool for accurate cutting with superior performance in tight corners and circles.
  • Professional Metal Nibbler: this air operated nibbler is easy to operate and control. The handheld tool can be used for nibbling plastic, tin, aluminum, and other metals.
  • Easy-to-use: air powered tool provides easily access to punch and die for quick replacement. Rear exhaust of this pneumatic nibbler directs the air away from work area.
  • Portable Nibbler: lightweight hand tool features a Lock-off lever for low-speed starting, providing enhanced user control. Pneumatic tool allows the user to place die in four different cutting positions.
  • Specifications: powerful air nibbler delivers 2750 strokes per minute. Rugged nibbling head and.177 in. diameter punch of the pneumatic nibbler cuts steel up to .060 in. (16 gauge) and aluminum up to .102 in. (10 gauge).
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock