Best Pneumatic Water Valves
LC LICTOP Brass Sintered Bronze Breather Vent Flat Pneumatic Muffler Filter,1/4" NPT (Pack of 10)
- Easy to install and high lift to reduce results, fast and reliable connection.
- They are suitable for manual valves, solenoids, exhausts, vacuum generators, crankcases, steering boxes..
- The silencer/muffler is used to reduce the dynamic noise of the exhaust of pneumatic components or equipment..
- Commonly used in single-acting cylinders or valves to prevent dust and foreign particles from entering the port to the atmosphere..
Check Stockuxcell Nickel-Plated Copper One Way Air Check Valve G 1/4 Female Threaded Full Port Check Valve 2Pcs
- Function: the check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air.
- Material and size: the one way check valves are made of PVDF, sturdy, wear-resistant and durable for long-term use.
- Each check valve measures 6.3 mm/ 1/4 inches, the total length is 38 mm/ 1.50 inches.
- Features: the pipe port of the check valve is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
- Easy to install: the non-return check valve is easy to install, convenient for you to unscrew and replace.
- Application: the non-return check valves are widely applied for automotive parts, machinery industry, household appliances, agriculture, etc..
Check StockPiutouyar 3Pcs Air Pneumatic Mufflers 1/4\ Male Thread Hex Sintered Silencer Brass Exhaust Muffler Filter Air Line Fitting
- WHAT WILL YOU GET - You will get 3pcs sintered brass filter. Thread size is 1/4". Sintered pneumatic muffler height is 26mm. The max diameter is 15mm. Maximum pressure is 300PSI, max operating temp is 35F to 300F..
- HIGH QUALITY MUFFLER - Pneumatic exhaust muffler are made of high quality brass, thicker and more durable. Brass silencer is stronger than other materials silencer, it is not easy to rust, wear-resistant, not deformed and anti-corrosion..
- MULTIPLE USAGE - Pneumatic silencer muffler widely used for air cylinders, cylinders, solenoid valves, crank cases, gear boxes, oil tanks and pneumatic tools. After installing the sintered brass filter, high noise reduction effect, the noise level during the operation of the equipment can be reduced, improve the user's sense of use..
- PERFECT DISIGN - The compressed air silencer adopts an outer hexagonal design, and you can easily install and remove it with a wrench. Improve your work efficiency and save your precious time and energy. The noise silencer has smooth edges and meticulous workmanship, deeper and smoother threads to ensure quality..
- QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you h....
Check StockOasisSpace Pneumatic Rubber Rollator Walker with Seat - 12\ Wheel Beach Aluminum Rollator Walker for Outdoors, Mobility Walking Aid for Elderly
- PNEUMATIC RUBBER TIRES - OasisSpace Rollator walker features 12” front pneumatic rubber tires and 10” rear tires perfect enable safe and comfortable movement on all surfaces and make this rolling walker the perfect choice for people who need a mobility aid but still spend a lot of time outdoors..
- IDEAL FOR TRAVELLING - The outdoor walker comes with compact design allow you walk in the narrow place,canteen,airplane etc. when folded, this rollator walker with seat can be taken anywhere. The rollator has a spacious seat as well as a comfortable backrest and therefore offers the perfect opportunity for a short rest on your excursions..
- ADJUSTABLE HEIGHT - The handles of the walker are height-adjustable between 33.4" and 37.4" to perfectly fit your needs. The pressure of the pneumatic wheels can be easily adjusted via the standardized Schrader / American valves, which allows everyone to find the individually perfect compromise between smoothness and damping..
- LOCKING HAND BRAKES - Pneumatic Rubber Rollator Walker are so easy to use and comfortable on the hands. Simply squeeze to control the speed and push down to lock the brakes in a locked and parked position..
- GURANTEE - All OasisSpace rolling walkers come with a standard one year warranty, We offe....
Check StockEONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox
- Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
- Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
- Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
- Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
- Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check StockKarcy Pack of 100 Brass 1/4\ NPT Flat Pneumatic Muffler Filter Silencer Fitting
- ►【FEATURE】- Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
- ►【UNIVERSAL DESIGN】- Brass Exhaust Muffler Thread Outer Diameter : 1/4NPT.
- ►【ADVANTAGE】- Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
- ►【 MATERIAL】- Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
- ►【APPLICATION】- Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within noise requirements..
Check StockCheck Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces
- Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
- Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
- Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
- This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
- Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
- Note: when installing the check valve, pay special attention to the flow direction of the medium.
- The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check StockWater Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)
- ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
- General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
- Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
- Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
- Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
- Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
- It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check StockSMC NAD402-N04 Auto Drain Valve, 1/2\ NPT
- Typical Application:Instrumentation, hydraulic and pneumatic systems.
- Heavy duty Viton seal for long term safety.
- Material:Brass bodies, steel handles except where noted..
- Polyline valves have brass bodies and brass handles..
Check StockZLYY 5Pcs 1/4 Male Thread Pneumatic Silencer Muffler Fitting, Top Adjustable Air Flow Speed Controller, Sintered Bronze Exhaust Muffler
- FEATURES: Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
- SPECIFICATIONS: Brass Exhaust Muffler Thread Outer Diameter : 1/4 PT.
- APPLICATION: Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise.
- ADVANTAGE: Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the audio frequency of the original airflow, thereby reducing noise..
- HIGH QUALITY MATERIAL: Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
Check StockYSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank
- ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
- YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
- Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check StockPSCCO 8PCS Air Pneumatic Mufflers 1/4'' Bronze Exhaust Muffler Silencer
- Package includes: 5 sintered bronze mufflers, 1 teflon tape.
- Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
- Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
- Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.
Check StockQuickun Air Pneumatic Mufflers 1/4 Male Thread Sintered Bronze Exhaust Muffler Silencer Pack of 3
- G-thread size: 1/4". Each package includes 3 sintered bronze mufflers..
- Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
- Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.
Check Stock