Categories

Best Poclain Hydraulic Piston Motor

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN.
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8".
  • Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only*.
  • Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*.
Check Stock

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

  • [Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UN Radial Shaft Seal 20mm ID x 26mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

  • [Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 12mm ID x 20mm OD x 5mm Width PU Oil Seal, Blue Pack of 10

  • [Size] - 12mmx20mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UN Radial Shaft Seal 12mm ID x 22mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

  • [Size] - 12mmx22mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 20mm ID x 28mm OD x 5mm Width PU Oil Seal, Blue Pack of 2

  • [Size] - 20mmx28mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

uxcell UHS Radial Shaft Seal 11.2mm ID x 19.2mm OD x 5mm Width PU Oil Seal, Blue Pack of 5

  • [Size] - 11.2mmx19.2mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
  • [Operation Range] - Working Speed: Less than 0.5m/s.
  • Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
  • [PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
  • [Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
  • [Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.
Check Stock

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock

eAhora Electric Bike AM100 Plus 30Mph Electric Bike for Adults 750W Peak/14Ah Upgraded Mountain Ebike 27.5'' 9-Speed Gears

  • ...60miles(electric mode) and 60-80 miles (pas mode) per charge. The 14AH Battery balance technology contributes to the uniform quality of the packs and driving units, and ultimately to the quality of the e-bike..
  • 【 】: Front high-strength front fork shock absorption. Rear Hydraulic suspension has ensure that you ride more smoothly on hillside, downhill and Unequal roads,it can be mountain bikes, also suitable for urban cycling and commuting..
  • 【 】: AM100 using hydraulic front and rear disc brakes with 180mm rotors. The disc brakes features an open system design using non-corrosive and environment-friendly mineral oil. Features dual piston design, melt forged caliper body with automatic positioning via front or rear adapters..
  • 【 】: The 80C display delivers the full key information on a high-contrast LCD screen, perfectly readable even in direct sunlight. The extremely robust control unit sits conveniently on the middle handlebar grip for perfect ergonomics..
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock

eAhora 30Mph AM100 Plus 750W Peak Electric Mountain Bike 27.5'' Electric Bike for Adults 48V 14AH Battery,Dual Suspension,9 Speed Gears

  • ...60miles(electric mode) and 60-80 miles (pas mode) per charge. The 14AH Battery balance technology contributes to the uniform quality of the packs and driving units, and ultimately to the quality of the e-bike..
  • 【 】: Front high-strength front fork shock absorption. Rear Hydraulic suspension has ensure that you ride more smoothly on hillside, downhill and Unequal roads,it can be mountain bikes, also suitable for urban cycling and commuting..
  • 【 】: AM100 using hydraulic front and rear disc brakes with 180mm rotors. The disc brakes features an open system design using non-corrosive and environment-friendly mineral oil. Features dual piston design, melt forged caliper body with automatic positioning via front or rear adapters..
  • 【 】: The 80C display delivers the full key information on a high-contrast LCD screen, perfectly readable even in direct sunlight. The extremely robust control unit sits conveniently on the middle handlebar grip for perfect ergonomics..
Check Stock

fits for HITACHI O-Ring Box (383PCS) Applicable to Excavator EX60 EX100 EX120 EX200 EX300 EX400 EX220 EX135, aftermarket Replacement Parts

  • Application model: EX60 EX100 EX120 EX200 EX300 EX400 EX220 EX135.
  • QUALITY: WEARABLE, HIGH TEMPREATURE ENDURANCE, HIGH PRESSURE RESISTANCE, GOOD PERFORMANCE.
  • VARIOUS SEAL KITS AVAILABLE FOR BOOM/ARM/BUCKET HYDRAULIC CYLINDER, MAIN PUMP, CONTROL VALVE, TRACK ADJUSTER, SWING MOTOR, TRAVEL MOTOR, CENTER JOINT, REGULATOR VALVE, PILOT VALVE AND GEAR PUMP, ALSO O-RING BOX, COUPLING, DU BUSHING, PISTON STEEL RING, PUSHER ARE AVAILABLE.
  • NOTE: THE PICTURE IS JUST FOR REFERENCE, THE REAL PRODUCTS MAY LOOK DIFFERENT.
Check Stock

ACDelco Professional 530-300 Premium Gas Charged Rear Shock Absorber

  • a hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping....
  • drawn over mandrel (dom) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
  • gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
  • full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
  • o-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
Check Stock