Categories

Best Poe Compact

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • ...he power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, installers can use laptop or CCTV Tester to easily adjust camera angle and configure IP.
  • 【PLUG-N-PLAY INSTALLATION】Plug-n-Play, no configuration or setup is required. With compact dimension ( 3.1”* 2” * 1”), enough to fit many junction boxes or outdoor waterproof enclosures..
Check Stock

TRENDnet Inline PoE Tester, TC-NTP1, Tests 4PPoE, PoE+, PoE & Passive PoE Technology, Wattage, Voltage, Amperage, Polarity, LED Display, Battery-Free, Troubleshoot PoE Issues, IEEE 802.3af/at/bt

  • PORTS: This Inline PoE tester is equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PoE Device connection.
  • TESTING MODES: The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD.
  • USER FRIENDLY: The TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box.
  • COMPATABILITY: The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V..
  • STEP BUTTON: The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring..
  • TROUBLESHOOT IN REAL TIME: Troubleshoot PoE issues in real-time on-the-go and accurately test 4PPoE, PoE+, PoE, and passive PoE technologies with this compact and lightweight PoE testing tool..
Check Stock

TRENDnet 8-Port Gigabit PoE+ Switch, 8 x Gigabit PoE+ Ports, 123W PoE Power Budget, 16 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG80G

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports.
  • POE+ POWER BUDGET & SWITCH CAPACITY: 123 W PoE power budget supports up to eight power over Ethernet devices and the 8-port gigabit PoE+ network switch provides 16Gbps switching capacity to support edge network installations.
  • COMPACT FANLESS DESIGN: With a compact and lightweight rugged metal housing design, this desktop switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation.
  • DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex), Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex), Gigabit: 2000 Mbps (full duplex).
  • OPERATING TEMPERATURE: This 8-port gigabit PoE+ network switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F).
Check Stock

YuanLey 5 Port Gigabit PoE Switch with 4 Port PoE+ 1000Mbps, 802.3af/at 78W Built-in Power, Fanless Metal Unmanaged Plug & Play

  • [All Gigabit Ports] Includes 4 Gigabit POE ports, 1 Gigabit UpLink Ethernet port, all ports up to 100/1000Mbps speed, has excellent network performance..
  • [78W High PoE Power] Support IEEE 802.3af/at PoE power supply. The whole power is 78W, up to 30W per port. Suitable for poe power supply for multiple devices..
  • [Unmanaged Switch] All ports support PoE, and support automatic detection, can connect POE and non-POE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and Play, no configuration required, can be easy installed..
  • [Extend Function] When the extend mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety..
  • [Wide Applications] High Power, Built-in power supply. Compact design. Durable Metal. Bilateral heat dissipation. LED activity indicator lights. Can be widely used in security monitoring, computer networks, wireless coverage, office and home networks, etc.. Aslo we provide the best after-sale sevice, 100% Satisfaction..
Check Stock

Ubiquiti UniFi Dream Machine SE (UDM-SE)

  • Ubiquiti ER-X-SFP EdgeRouter X Gigabit Router 6-Port PoE, SFP, supports 24V passive PoE to power up to five airMAX devices. 5 Gigabit ports and 1 Gigabit SFP port for backhaul applications..
  • The EdgeRouter X SFP combines cost-effective routing performance with the convenience of passive PoE support in a compact form factor..
  • ER‑X‑SFP supports 24V passive PoE to power up to five airMAX devices..
  • At $79 USD MSRP the EdgeRouter X SFP offers a breakthrough combination of value and performance in routing with passive PoE support..
  • The EdgeRouter X SFP features 5 independent Gigabit RJ45 ports and 1 Gigabit SFP port all six are configurable for switching. SFP port provides fiber connectivity to support backhaul applications for carrier-class networks..
Check Stock

Dishwasher Hinge Cable Tension Cord for LG Electronics 4933DD3001B 6026050 AP4511304 4933DD3001A PS3524406

  • RJ45 port supports 10/100/1000 Ethernet connections and Comply with IEEE 802.3at/af Power over..
  • Supports passive PoE to power the switch.We recommend supplying power with 60W PoE adapters(not included)..
  • POE extender:No additional power supply is required plug-and-play simple set up,Extends the range of PoE and Ethernet an additional 100 meters..
  • Automatically detects and protects PoE equipments from being damaged by incorrect installation..
  • Compact size, Pole Mountable and Weather-proof Case.Please note that there is no power supply..
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • ...other ports, reducing maintenance costs..
  • Energy-Saving and Reliable Data Transmission: Energy saving design compliant with IEEE802.3az. Support IEEE 802.3X flow control, ensure stable, reliable and efficient data transmission. Sturdy metal casing with low power consumption fanless design to ensure silent operation. Compact size 5.12*3.46*1.18 inch with desktop or wall mount methods are well-suited for different environments..
Check Stock

16 Port PoE Switch, 16 PoE+ 100Mbps Ports with 2 Gigabit Uplink Ethernet Ports, 1 Cambo SFP, Unmanaged Plug and Play, Each Port Up to 30W, High Power Total Budget 300W, 803.af/at Compliant, Rack Mount

  • 【PLUG AND PLAY】16 x 10/100Mbps PoE ports and 2 gigabit ethernet uplink ports and 1 SFP port unmanaged PoE switch, easy setup with no software installation or configuration needed. Does not have IP address or web interface..
  • 【HIGH PERFORMANCE】 Compliant with IEEE 802.3af/at Network protocol standard, supports PoE power up to 30W for each PoE port(Total of 300W PoE power budget).Compact & Sturdy Metal Housing design makes it safe to use in various environments.
  • 【STANDARD POE SWITCH】PD Detection, Automatically detect and provide required power for your PoE devices and protect your non-PoE equipment from being damaged. PoE Extension data transmission up to 600ft long distance if needed (Transmission Speed will be reduced to 10Mbps if extend function is operating, must use high quality cable).
  • 【Sturdy Metal Case】Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
  • Note: Do not support passive 24V PoE device E.g. ubiquiti access point.
Check Stock

UniFi US-8-60W 8-Port Gigabit PoE Compliant Managed Switch

  • UniFi Switch 8 US-8-60W 8-Port Fully Managed Gigabit Switch 802.3af PoE ports 60 Watts.
  • The UniFi Switch 8-port models feature Gigabit Ethernet ports in a compact form factor. The switches are fully manageable, delivering robust performance and intelligent switching for your networks..
  • The US-8-60W is an 8-port gigabit switch with four 802.3af PoE ports. Its auto-sensing PoE ports deliver up to 15.4W of power per port..
  • The new 8-port models feature Gigabit Ethernet ports in a compact form factor. For its total, non-blocking throughput, each UniFi Switch supports up to 8 Gbps..
  • The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss, with a switching capacity of 16 Gbps..
Check Stock

UniFi Switch 8 US-8-60W 8-Port Fully Managed Gigabit Switch 802.3af PoE Ports

  • UniFi Switch 8 US-8-60W 8-Port Fully Managed Gigabit Switch 802.3af PoE ports 60 Watts.
  • The UniFi Switch 8-port models feature Gigabit Ethernet ports in a compact form factor. The switches are fully manageable, delivering robust performance and intelligent switching for your networks..
  • The US-8-60W is an 8-port gigabit switch with four 802.3af PoE ports. Its auto-sensing PoE ports deliver up to 15.4W of power per port..
  • The new 8-port models feature Gigabit Ethernet ports in a compact form factor. For its total, non-blocking throughput, each UniFi Switch supports up to 8 Gbps..
  • The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss, with a switching capacity of 16 Gbps..
Check Stock

MikroTik hAP ac3 LTE6 kit RBD53GR-5HacD2HnD&R11e-LTE6 Wireless Dual-Band Router with LTE Support and 5 Gigabit Ethernet Ports

  • hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output.
  • Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
  • It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment..
  • Current, PCB temperature and Voltage Monitor.
Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

  • 6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock