SODOLA 24 Port Gigabit PoE Switch 400W|24 Gigabit PoE+ Ports&2 Gigabit SFP Uplink, Support QoS,Extend/VLAN Mode, Fanless Rackmount, IEEE802.3af/at, Plug&PlayGigabit Ethernet Unmanaged Network Switch
- 【24 Port Gigabit PoE Switch 400W】24*10/100/1000Mbps PoE+ Ports&2* Gigabit SFP Uplink. With built-in power supply 400W, it intelligently identify whether the IP terminal supports power supply and decide to power it or not..
- 【Larger Bandwidth】Switching capacity is 52Gbps, each port can reach 1G rate at the same time.Each port Maximum supports 30W output power complied with 802.3af/at standard.(Note:Not applicable for 24V devices).
- 【QoS Priority Support】Port 1-8 support QoS,the data of QoS ports will be forwarded first to ensure traffic optimization for important devices when network is busy..
- 【VLAN and Link Extension Mode】1-24 ports are isolated from each other and can communicate with two uplinks ports to reduce network congestion. Port 17-24 port can be link extended to 250m at the rate of 10m..
- 【Plug-and-play】Easy to use and simple set up with no software or configuration needed.Durable Metal housing, fanless design,1U rackmout, it can be widely used with IP cameras, Wireless Access Point, Computer Networks devices, data transmission etc..
Check StockWireless WiFi Bridge, UeeVii 5.8G Point to Point Outdoor 2KM Long Range CPE with 24V PoE Adapter 12dBi Antenna 2 * 100Mbps LAN/PoE RJ45 Port,2-Pack
- ...ng, you only need to transfer one end to A as the master bridge and the other end to B as the slave bridge to complete the pointtopoint dial-up pairing. The bridge was built in 2 100M network LAN/PoE port, and the highest network speed that can be reached is 100Mbps.
- The CPE451 WiFi bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability..
- CPE451 point to point bridge adopts low power consumption, high-performance design, radio frequency index and radiation index are in full compliance with national standards. It supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD) to reduce equipment energy consumption..
- This Internet bridge supports a 24V POE power supply, the construction is simplified, and it is safe and reliable. It is managed by AC, and all bridge pairing information is clear at a glance, which is convenient for centralized management and maintenance, and greatly simplifies the difficulty of maintenance. This wireless bridge can also be reused when you relocate, making your cost lower..
Check StockWAVLINK N300 Outdoor WiFi Extender, Outdoor CPE for PtP and PtMP Transmission | 11dBi Directional Antennas, 1.5km, PoE Powered | Support Access Point/Router/Repeater Modes, Ideal for Barn Garage Yard
- 【Excellent Outdoor WiFi Option】It supports up to 64 devices and provides 2.4GHz 300Mbps high speed with 100M Ethernet port. Point to Point/Multi-Point connection (1-4) can be used for elevator monitor/surveillance networks. Simple settings can achieve wireless optimization, and improve the quality and effectiveness of link transmission..
- 【11dBi Directional Antenna】High gain antenna panel with 2 built-in 11dBi directional MIMO antennas, is designed to directionally strengthen the WiFi signal and make it more focused. Also the WiFi coverage in a specific direction is farther than omnidirectional antennas. It will make full use of your existing network!.
- 【1.5km Wireless Data Transmission】Maximum 1.5km long range wireless data transmission (tested in paired PtP or PtMP transmission, barrier-free environment). Specially designed for outdoor use, ideal for extend WiFi network video surveillance range for barn, shop, garage, warehouse, factory, community, street ..
- 【Enhanced Waterproof Design】IP65 rated waterproof & heat resistant housing ensures continuous operation in harsh outdoor environments, withstanding temperatures ranging from -22℉ to 158℉. Lightning protection(15KV ESD, 4KV) and weatherproof design ensure stable connection in ha....
Check StockLINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP
- 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
- 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
- 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
- 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check StockAmcrest NV4108E-A2 4K 8CH POE NVR 1080p/3MP/4MP/5MP/8MP POE Network Video Recorder - Supports up to 8 x 8MP/4K IP Cameras 8-Channel Power Over Ethernet Supports up to 10TB HDD Not Included
- ...ras on your network directly through their ethernet cables for ultimate ease and convenience in a home security system..
- Max 80Mbps Incoming Bandwidth, records 8 cameras @ 4K using H.264. Records 8 cameras @ 4K by changing default settings from H.264 to H.265 and adjusting bit rate to 1792 on each camera for maximum optimization. Conveniently packaged with extras such as USB mouse, network cable, and quick start guide..
- Includes USB backup feature for peace of mind. All systems CE & FCC certified with UL compliant power supplies. Guaranteed for a Full Year from purchase with US Support and US Warranty offered exclusively by Amcrest..
Check StockXM1000pro
- 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
- 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check StockGoalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection
- 【VLAN mode 】VLAN mode(Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
- 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
- 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
- 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the term....
Check StockTRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K
- GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
- PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
- INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
- GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
- PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
- AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..
Check Stock【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System
- 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-poi....
Check StockUeevii 5.8G Point to Point Wireless Bridge CPE451&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment
- ...est network speed that can be reached is 100Mbps.
- Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
- The CPE451 WiFi bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability..
- 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
- CPE451 point to point bridge adopts low power consumption, high-performance design, radio frequency index and radiation index are in full compliance with national standards. It supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD) to reduce equipment energy consumption..
Check StockTRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch
- GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
- EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
- 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
- POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
- FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check StockYIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play
- 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
- 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
- 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
- 【Plug and Play】Easy setup with no software installation or configuration needed.
- 【Network cable short-circuit protection mechani....
Check StockYIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play
- 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
- 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
- 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
- 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
- 【Fanless design】The fanless design makes poe switch work without any noise..
- 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock