Categories

Best Poe Pole Mount

Mikrotik BaseBox 2 Power Over Ethernet (PoE) Grey WLAN Access Point

  • The BaseBox2 also known as RB912UAG-2HPnD-OUT is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture.
  • Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
  • The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
  • Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
  • PoE in: Passive PoE, Wireless 2.4 GHz number of chains: 2, Wireless 2.4 GHz standards: 802.11b/g/n, 10/100/1000 Ethernet ports: 1, Number of SIM slots: 1 Modem (Mini SIM), MiniPCI-e slots: 1, Number of USB ports: 1.
Check Stock

LUXUL XAP-1440 | HIGH Power AC1200 Dual Band Outdoor Access Point

  • Concurrent Dual-band 2.4 and 5 GHz, Designed for Broad Outdoor coverage.
  • 2x2 AC1200 MIMO, Compatible with the Luxul XWC-1000 Wireless Controller.
  • PoE Injector Included , Included Directional Antenna with 70° Beam-width for Optimal Coverage.
  • IP-65 Weather Resistant Enclosure Pole or Wall Mount (mounting hardware included).
Check Stock

MokerLink 4 Port PoE Extender, IEEE 802.3 af/at PoE Repeater, 100Mbps, 1 PoE in 3 PoE Out, Wall & Din Rail Mount POE Passthrough Switch

  • 4 PoE Ports: Include 1 PoE In, 3 PoE Out, 10/100Mbps speed. POE transmission distance 100 meters..
  • IEEE 802.3 af/at: All ports support this standard PoE, Input Max 30W, Output Max 24W, Average 8W per port. PoE Voltage 44-57 Vdc. PoE pin: Input, 1/2 (-), 3/6 (+), 4/5(+), 7/8(-).
  • Unmanaged Plug & Play: Support power detection function, automatically detect devices, just plug in the ethernet cable, connect directly to the device, without configuration..
  • Easy Installation: No need for additional power adapter, powered by POE network. Support wall mount and din rail mount, small size, save space, suitable for more positions.
  • Widely Used: Support 3-level cascading, can connect poe AP, camera, phone and other POE devices, increase POE coverage at low cost.
Check Stock

TRENDnet 24-Port Gigabit PoE+ Switch 24 x Gigabit PoE+ Ports 370W Power Budget 48Gbps Switch Capacity RackMount Kit Included Ethernet Network Switch Metal Lifetime Protection Black TPE-TG240G

  • ethernet port interface: 24 x gigabit poe+ ports..
  • poe power budget & switch capacity: the large 370 w poe power budget supports up to 30 watts of poe power per port and all gigabit ports produce a 48 gbps switching capacity and supports jumbo frames up to 10 kb.
  • poe camera flexibility: the 24-port gigabit poe+ network switch recognizes non-poe, poe (15.4 w), and poe+ (30 w) cameras (or other poe devices) and supplies the required amount of power automatically.
  • rack mountable: this network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit with rack mount brackets included for installation..
  • operating temperature: this 4-port gigabit poe+ ethernet switch is rated with an operating temperature range of 0 – 40 °c (32 - 104 °f)..
Check Stock

TRENDnet 16-Port Gigabit PoE+ Switch, 16 x Gigabit PoE+ Ports, 246W PoE Power Budget, 32 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG160g

  • ETHERNET PORT INTERFACE: 16 x Gigabit PoE+ ports..
  • POE POWER BUDGET & SWITCH CAPACITY: The large 246 W PoE power budget supports up to 30 Watts of PoE power per port and all Gigabit ports produce a 32 Gbps switching capacity and supports Jumbo Frames up to 10 K.
  • POE CAMERA FLEXIBILITY: The 16-Port Gigabit PoE+ Network Switch recognizes non-PoE, PoE (15. 4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically.
  • RACK MOUNTABLE: This network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit and rack mount brackets included for installation..
  • OPERATING TEMPERATURE: This 16 port gigabit PoE+ Ethernet switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F)..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection..
Check Stock

Dishwasher Hinge Cable Tension Cord for LG Electronics 4933DD3001B 6026050 AP4511304 4933DD3001A PS3524406

  • RJ45 port supports 10/100/1000 Ethernet connections and Comply with IEEE 802.3at/af Power over..
  • Supports passive PoE to power the switch.We recommend supplying power with 60W PoE adapters(not included)..
  • POE extender:No additional power supply is required plug-and-play simple set up,Extends the range of PoE and Ethernet an additional 100 meters..
  • Automatically detects and protects PoE equipments from being damaged by incorrect installation..
  • Compact size, Pole Mountable and Weather-proof Case.Please note that there is no power supply..
Check Stock

TRENDnet 8-Port Hardened Industrial Unmanaged Gigabit PoE+ DIN-Rail Switch, TI-PG80, 200W Full PoE+ Power Budget, 16 Gbps Switching Capacity, IP30 Rated Network Switch, Lifetime Protection, Black

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ Ethernet ports.
  • FULL POE+ POWER BUDGET & SWITCHING CAPACITY: The Gigabit PoE+ switch supplies up to 30 Watts of PoE / PoE+ power per port with a 200 Watt PoE power budget and allows for a 16 Gbps switching capacity..
  • DIN-RAIL & WALL MOUNT KIT: This 8-Port Gigabit PoE+ network switch comes with an integrated DIN-Rail mount and mounting hardware..
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated Gigabit PoE+ Ethernet switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • REDUNDANT POWER: The 8 port switch has dual redundant power inputs with overload current protection (power supply sold separately: model: (TI-S24048).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..
Check Stock

4 Port in-Wall Gigabit PoE Extender with IEEE 802.3bt Uplink - Power Over Ethernet Switch Wall Plate with Full Passthrough VLAN Computer Network IP Camera Feed Internet Office VoIP

  • 4 PoE+ ports on one network cable run. 60 Watt max PoE+ switch powers up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source..
  • An in-wall PoE passthrough switch opens up opportunities. Our 4 port PoE switch lets you add devices and capacity anywhere on your network, without the cost of adding extra lines and expensive infrastructure..
  • Wall mount PoE switch fits flush to wall boxes for a clean, stylish install. Install this power over ethernet switch into any standard electrical wall box for complete integration into your home or office..
  • Mount the PoE extender in any remote office, dorm room, or hotel room. Functions as a network switch for office VoIP phone systems, multiple live IP camera feeds, and anywhere that needs a little extra power and network capacity..
  • Covered by an industry leading 1-year manufacturers warranty and lifetime technical support with a PoE Texas expert. Please email or call 512 479 0317.
Check Stock

Ubiquiti POE POE-24-12W-5P - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter 5-pack

  • Ubiquiti PoE POE-24-12W - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter (5-pack).
  • Ubiquiti Networks POE-24-12W is for use with airMAX and UniFi products. It's a replacement 12V, 12W PoE adapter, with remote hardware reset circuitry..
  • The POE-24 (24V, 12W) features earth grounding/ESD protection, power LED, and is available in USA (NEMA 5-15). Remote re-start capability is a key....
  • PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against....
  • The 24V, 0.5A models, POE-24-12W, are wall-mountable using the optional wall-mount brackets..
Check Stock

TRENDnet 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch 4 x Gigabit PoE+ Ports Shared Gigabit Port RJ-45/SFP Dedicated SFP 120W Power Budget IP30 Lifetime Protection Black TI-PG62

  • ETHERNET PORT INTERFACE: 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45/ SFP), 1 x Dedicated SFP slot.
  • POE POWER & SWITCHING CAPACITY: The 6 Port Gigabit PoE+ DIN-Rail Switch has a 12 Gbps switching capacity and 120 Watt PoE+ power..
  • EXTREME TEMPERATURE SWITCH: This Gigabit PoE+ Switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • DIN-RAIL & WALL MOUNT KIT: This 6-port Gigabit PoE+ industrial switch comes with an integrated DIN-rail mount and mounting hardware..
  • REDUNDANT POWER: The 6 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S15052, TI-S24052, TI-S12048, TI-S24048, 48VDC3000).
Check Stock

TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
  • POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
  • DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
  • REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
  • GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
  • SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • ... and Reliable Data Transmission: Energy saving design compliant with IEEE802.3az. Support IEEE 802.3X flow control, ensure stable, reliable and efficient data transmission. Sturdy metal casing with low power consumption fanless design to ensure silent operation. Compact size 5.12*3.46*1.18 inch with desktop or wall mount methods are well-suited for different environments..
Check Stock

LINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems

  • DC12V ~ DC48V POE VOLTAGE BOOSTER - Supply standard IEEE802.3af/at POE power with DC12V/DC18V/DC24V/DC36V/DC48V input.
  • 8-PORT FULL GIGABIT POE SWITCH - Providing 8*10/100/1000Base-T Ethernet PoE ports and 2*1000Base-X SFP slots (Fiber module is not included). Each POE ports are compliant to IEEE802.3af/at standard. It supports one-key fast ring fiber network and broadcast storms protection (BSP).
  • INDUSTRIAL DESIGN FOR HARSH ENVIRONMENT - Fanless design and wide working temperature (-40℃ ~ 75℃ or -40 ℉ ~167 ℉).
  • POE WATCHDOG - Realtime monitoring POE load device's status and will automatically reboot POE port when the connected device is not active. It proivdes non-stop running of POE device, like security cameras, IP speakers and IP phones.
  • TOTAL 240W POE BUDGET - Up to 30W per POE port, and total 240W POE budget (DC48V input), or 120W (DC24V input), or 80W (DC12V input).
  • NON-STOP POE SUPPLY WITH DUAL POWER INPUT - Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system.
  • APPLICATION - For solar power system, vehicle, RV, VoIP IP phone system, robust fiber ring network.
Check Stock