TRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch

  • GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
  • EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
  • 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
  • POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
  • FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check Stock

PoE Texas - PoE Injector - 12 Port Gigabit Passive Midspan Injector with 48V 120 Watt UL Power Supply - Power Over Ethernet for 802.3af or at PoE+ Devices VoIP Phone WiFi Access Point IP Camera

  • Instantly upgrade your network to PoE+. Simplify installations with a multi-port midspan injector. This unmanaged midspan PoE injector features 12 PoE ports for simplified transmission of power + data..
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough. Power up to 12 IP cameras, desktop VoIP phones, or other low voltage devices. This passive PoE injector will always deliver the same voltage as its power supply..
  • With available power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or at devices. PoE Texas offers other bundles with assorted power supplies to match your different device requirements..
  • Includes 48 volt 120 watt UL approved power supply for a shared budget of 120 watts. A streamlined and cost-effective multi port solution with 12 x gigabit ports (Data In) and 12 x gigabit PoE ports (Data + PoE Out)..
  • All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Sophos APX 120 Indoor Access Point and 2YR Central Wireless Standard

  • Sophos APX 320X Outdoor Access Point - 2x2 MIMO, dual radio, dual 5 GHz capable, 4 x external omni-directional antenna included, further sector and directional antenna options available for separate purchase. Includes mounting bracket and clamps for wall and/or pole mount. 5-Year warranty, no extended warranty available..
  • Power adapter/PoE Injector not included, PoE Injector available for separate purchase. 11.5W max. power consumption (802.3af PoE Injector required)..
  • NOTE: Management in Sophos Central only upon launch..
Check Stock

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5×2.1mm DC Plug Cable(PS5712TG)

  • Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup..
  • Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector..
  • This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less..
  • Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port..
  • All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

StarTech.com 4 Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af - Wall-mountable Power over Ethernet Midspan (POEINJ4G)

  • Deliver power and data to four PoE-powered devices(PD)using this wall-mountable PoE+ midspan hub.
  • 4 Port Gigabit Power over Ethernet Midspan.
  • Wall-mountable Power over Ethernet Injector.
  • Delivers more power with up to 30w per port.
  • Deliver power and data to four PoE-powered devices (PD) using this wall-mountable PoE+ midspan hub.
  • Delivers more power with up to 30 w per port.
Check Stock

Tripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black

  • ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
  • EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
  • SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
  • SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

IP Security 5.0MP H.265 POE PTZ Dome Camera, Hikvision Compatible 5X Optical Zoom, Indoor/Outdoor Network Camera with Audio, Pan 355° Tilt 90°,Waterproof IP66 98ft Night Vision, Motion Detection

  • ... security camera provides you smooth Stream Video, 2.7-13.5mm 5X Motorized lens and a night-vision distance of up to 100ft. H.265 video compression features efficient video recording to save storage space while providing smoother video..
  • 【Plug&Play with Hikvision NVR】No need power adapter, optional PoE switch or injector, easy plug&play with multiple 5MP PoE NVRs such as Hikvision, Laview, LTS, EZVIZ etc.And it also can work with Lorex and Dahua 5MP NVRs after enabled DHCP..
  • 【IP66 Waterproof】The case is made of anti-explosion metal with brown color anti-explosion cover,IP66 waterproof Level. Built-in Surge and Lightning Protection Devices for Bad Weather..
  • 【1 Year Warranty and Satisfy Guarantee】 This camera requires a separated POE injector,POE switch or POE NVR to operate. (Notice: Power supply and POE injector are NOT included). We Provider 1 year warranty for you. Also,we could provide SDK for our IP camera, if you need, please contact us for tech support..
Check Stock

ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play

  • 1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
  • Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
  • Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
  • LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock

PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output - for 5V Non-PoE Security Camera and Devices Like Foscam Sonoff Tablet USB Dropcam Raspberry Pi and Others

  • 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features....
  • 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x....
  • This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit....
  • Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning....
  • All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call....
Check Stock

Mikrotik OmniTIK 5 PoE ac 7.5dBi Gb Ethernet Ports Access Point Omni Antennas

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock