Categories

Best Poe Pse

StarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)

  • 2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
  • POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
  • MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
  • TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
  • VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.
Check Stock

NOYAFA Advanced Network Cable Tester With PoE& NCV & Lamp For CAT5e/CAT6/CAT6a, Multifunction Wire Tracker Cable Tester For Tracker Underground Telephone Line Finder Home Repair

  • Main Function : Detecting PoE voltage, current, power, PSE standards Power supply modes, Verify RJ45 cables.
  • 1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode.
  • 2. Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP lan cable..
  • 3. Measure cable length accurately , the range is 120m..
  • 4. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • 5. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).
Check Stock

Cisco SG250-08HP Smart Switch | 8 Gigabit Ethernet GbE Ports | 45W PoE | Limited Lifetime Protection SG250-08HP-K9-NA

  • ETHERNET PORT CONFIGURATION: 8-port 10/100/1000.
  • POWER OVER ETHERNET: 8 PoE ports with 45W total power budget, PoE, PoE plus, PoE PD/PSE port.
  • CONFIGURATION AND CONTROL: Easy-to-use on-box WebUI, CLI offers basic plus capabilities, SNMP, Cisco FindIT Network Manager, PnP, auto-discovery,....
  • L2 plus FEATURES AND SECURITY: Static routing, VLANs, QoS, Voice VLAN, MSTP, IGMP Snooping Access Control List (ACL), 802. 1X, DoS prevention, SSH/SSL.
  • PEACE OF MIND: Limited lifetime , one year of technical support, and free software fixes for the term of the.
Check Stock

DSLRKIT Gigabit 48V 30watt PoE Injector Adapter Power Over Ethernet 802.3at af 1000Mbps

  • Support international standard IEEE802.3 af & IEEE802.3at(30W).
  • POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at..
  • PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
  • Support the isolation circuit protection, can effectively protect electrical equipment.
  • Support the short circuit, overvoltage protection.
  • 12V 2A power output, easy to access Poe network for non-PoE terminal.
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan

  • Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included). Please contact us if you received wrong pieces, we will send you a new case kit ASAP..
  • Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block.
  • Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment..
  • NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector..
Check Stock

Tenda 8 Port Fast Ethernet Switch（S108）| Desktop Ethernet Splitter | Ethernet Hub | Plug and Play | Fanless & Quiet | Unmanaged

  • 6 kV Lightning Protection: The switch offers various safety and protection types, including 6 kV lightening protection, PSE short-circuit protection, PoE overload protection, surge current protection etc..
  • Dual Uplink Port: With two 10/100Mbps uplink ports, the switch can meet the current demand for uplink bandwidth with NVR and router connection..
  • Standard PoE Power Supply: The switch support IEEE 802.3at/af standards. The entire switch offers a maximum PoE power output of 58 W, and 30 W for a single port, to supply power to and data transmission with IP cameras..
  • 250 m Data Transmission:I t supports extend mode and one-key VLAN. The hardware DIP mode switch makes long distance transmission effortless..
Check Stock

Network Cable Tester, Poe Cable Tester for CAT5e/CAT6/CAT6a, Ethernet Network Tester with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR

  • ▶【Three scan modes】AC filter mode/ Analog mode/ PoE mode.
  • ▶【PoE testing】Test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard)..
  • ▶【Hub blink】Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • ▶【Length measurement】Cable length testing accuracy can be up to 98% and 200 m..
  • ▶【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V)..
Check Stock

Tenda Layer-3 Managed PoE Switch|24 Port GE Ports| 4x1G Base-X SFP| 1 Console Port | VLAN | QoS | DHCP Snooping TEG5328P-24-410W

  • 【Layer-3 routing protocol】：Supports Layer-3 static routing protocol, meeting the demand of the 3-layer networking environment in which Layer-3 networks should be interconnected while Layer-2 networks should be isolated, thus realizing an efficient and fast layer-3 routing forwarding.
  • 【410W PoE power supply】：Offers 24 gigabit PoE ports complaint with IEEE 802.3af and IEEE 802.3at. With a maximum 370 W PoE output power of the whole switch, and a maximum 30 W PoE output power of a single port, the switch helps provide stable power and data transmission for gigabit WLAN and high definition digital monitoring devic-es.
  • 【Sound security features】：Supports IP address filtering, MAC address filtering, ARP filtering, DoS attack defense, and ACL access control list, improving network security.
  • 【Dual 6 kV professional lightning protection】：Provides dual 6 kV port and power lightning protection, and supports multiple protection features, such as PSE short circuit protection, PoE overload protec-tion, power over-temperature and overvoltage protection, and surge current protection.
  • 【Lifetime free tech-support】 - Tenda provides an industry-leading 3-year with FREE lifetime 24/7 dedicated tech-support team Call us at (800) 570-5892 or email us....
Check Stock

Fluke Networks - 5018508 MS-POE MicroScanner Copper Cable Verifier and PoE tester for RJ-45 Category 5-6A Ethernet Cables, Identifies Supplied Class 0-8 Power from Ethernet PSE Devices

  • Copper cable verifier with swift and simple PoE testing for Ethernet powered devices such as VOIP phones, cameras, lighting, 802.11a/b/g/n/ac/ax, detects voltages from active 802.3at/at/bt, PSE sources, negotiates and solicits PoE, Cisco UPOE, and PoH from active sources at the hardware or link layer with LLDP, shows maximum class of power available and voltage to 90 Watts.
  • Includes MicroScanner POE (Power over Ethernet) cable verifier with detachable wire map adapter, user guide, (2) AA alkaline batteries, carry pouch, 1 year warranty.
  • Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 0 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wire map, cable ID, and distance to fault, detects POTS.
  • Test voice/data/video cables with integrated RJ45 which support low voltage testing with no need for adapters, ensures high quality installations and quick troubleshooting in active network environment, measures length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wire map to TIA 568A/B standards, remote ID loc....
Check Stock

Network Cable Tester, 4 in 1 Wire Tracker PoE Tester with Ncv & Lamp for LAN CAT5 CAT6 Underground Telephone Line, Detect Voltage Measure Fault Distance, a Must-Tool for Home Repair, Cabling Engineers

  • 500m Test Range: The Rj45 cable tester measures the cable length and accurately locates the fault distance of the LAN cable, and the range is extended to 500m. This is longer than other testers and means it is equipped with the most powerful cable positioning technology for any work environment..
  • Multi-function: Continuity testing, cable length measurement, cable faults testing, POE testing, hub blink and NCV funtion..
  • POE Testing：identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard). Test CAT5e, CAT6, CAT6a (STP & UTP).
  • NVC Induction Pen：NVC induction pen design, accurate electricity measurement, safter to use..
  • LED Lighting and storage：Emitter and receiver all have lighting function. It can solve the trouble of dark work.With storage, memory and recall functions, it is convenient for users to use and calibrate..
  • Continuity Testing：CONT-Test open, short, cross, etc for STP, UTP cable. Detect AC voltage presence (50V-1000V).
  • Three Cable Scan Mode：Three scan modes selectable: Digital mode/ Analog mode/ PoE mode..
Check Stock

NetAlly LSPRNTR-300 LinkSprinter 300 Network Tester with WiFi and Distance to Cable Fault Indication, w/WiFi & Distance to Cable Fault Indication

  • Discover the nearest switch name and port information via CDP/LLDP/EDP, and verify link speed/duplex and connectivity to TCP/IP networks..
  • Validate Power-over-Ethernet (PoE) voltage from power sourcing equipment (PSE) according to 802. 3af/at standards..
  • View detailed test results, add comments, and run cable tests using your mobile device over a Wi-Fi hotspot built into the LinkSprinter..
  • Automate reporting and enable collaboration with test results upload and management via Link-Live Cloud Service..
Check Stock

Rsrteng CCTV Camera Tester with Cable Tracer WT255, IPC-1900C Plus 4K 8MP 8K 33MP IP Camera Test 4inch IPS Touch Screen CCTV Tester Support POE H.265 PTZ DC12V Output IPC Tester Replace 1800ADH

  • ...ter】HD camera tester support max 4K 8MP 8K 32MP H.264/H.265 IP Camera test.In H.265 encoding mode,the main stream test image supports a maximum resolution of 8K/24FPS.Use the latest 9.0 Android version,so you can install the APP in it. Use it to make your installation simple and efficient..
  • 【Security Tools】The POE function of the network camera tester built-in special tools for Hik and DH, support batches of fast setting of Hik and DH cameras. Support batch activate Hik & DH cameras and modify IP address, password etc.
  • At the same time, it has built-in OVIF test tool and other brand camera test tools, which can be compatible with most existing cameras..
  • 【Multifunction IPC tester】Support snapshot, video record & playback. Multi-brand OVIF IPC test. IP Discovery/Quick OVIF/IPC test /RTSP play/Client APK.Rapid OVIF, support face recognition and create test report.Built in WiFi, create WIFI hotspot. Support PoE 48V, maximum power 25.5W, UTP cable test, POE/PSE test.Powerful network tools to help you detect and set various network parameters..
  • 【More parameters&Cable tracer】 : With 5 inch IPS touch screen, 960x640 resolution. built-in 7.4V/2600mAh/19.24Wh battery.Normal working time 9 hours.Dual Ethernet port 10/100Mbps, Audio I/O, W-i-F-i, ....
Check Stock