Categories

Best Point Angle

General Tools 823 Digital Angle Finder Rule, 10-Inch

  • PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
  • LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
  • MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
  • PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
  • LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
  • Power source: "CR2032" Lithium-ion battery (included).
Check Stock

Glock in hand [Explicit]

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Adjustable positive retention point. When gun is fully holstered you get a audible and noticeable "click".
  • Holster has a full sweat shield to aid in re-holstering by giving you an indexing point and to keep clothing out of the opening..
Check Stock

The Major Mandaean & Nasoraean Scriptures: in one volume (Nasrayim and Mandaean Sacred Scripture)

  • Sharpen multiple types of drill bits – high-speed steel, masonry, Cobalt, & tin-coated drill bits. Designed for the serious tool user, This professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often.
  • Custom point angle sharpening – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability, A unique back-cut split-point bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in To.
  • Extend the life of your bits – from 3/32-inch to ¾-inch, create & remove split points & adjustable material take-off allows you to adjust the amount of material removed during sharpening.
  • 3-Year warranty - protects every Drill Doctor bit sharpener against defects due to workmanship or design, using a 115V machine in a location with 230V power sources voids the warranty.
  • Manufactured in Oregon - We design, engineer, & assemble our sharpening machines all under one roof in the USA.
Check Stock

Billiards Cue Ball Practice Training Artifact, Used in American Billiards Eight Balls, Billiards Cue Balls and Billiard Accessories

  • This billiard cue ball is made of High quality phenolic resin material, which is resistant to wear and impact..
  • Product diameter Approx 57.2mm/2.3in，Weight Approx 170g，The billiard cue ball is light in weight, small in size, easy to carry and easy to use..
  • Double-sided design, suitable for people with different needs at different stages, suitable for beginners and advanced players..
  • This is a professional training ball You can observe which point of hitting the mother ball will make it rotate.You can cultivate your own awareness of hitting point to find the angle between the ball and the rebound on the platform..
  • This is a professional training cue ball with scientific and precise point division. By observing the impact point, you can know more clearly which point will rotate it, as well as the angle and direction of rotation. Through continuous practice, cultivate your own awareness of the shot point..
Check Stock

Tulster IWB Profile Holster in Right Hand fits: Glock 42 w/TLR-6

  • Minimal to zero “drag” until retention point keeping “holster wear” down to a minimum..
  • Comes with a 1.5″ Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Holster has a full sweat shield to aid in re-holstering by giving you and indexing point and to keep clothing out of the opening..
Check Stock

Drill Doctor 750X Drill Bit Sharpener & Left-Handed Chuck, 3/32-1/2 in, DA02105PF, Grey/Black

  • Product 1: SHARPEN MULTIPLE TYPES OF DRILL BITS – high-speed steel, masonry, cobalt, & TiN-coated drill bits. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often.
  • Product 1: CUSTOM POINT ANGLE SHARPENING – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability, a unique BACK-CUT split-point bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in to.
  • Product 1: EXTEND THE LIFE OF YOUR BITS – from 3/32-inch to ¾-inch, create & remove split points & adjustable material take-off allows you to adjust the amount of material removed during sharpening.
  • 6 foot power cord. Permanent magnet motor produces consistent power, regardless of speed or load.
  • Product 1: 3-YEAR WARRANTY - protects every Drill Doctor bit sharpener against defects due to workmanship or design, using a 115V machine in a location with 230V power sources voids the warranty.
  • Product 2: Item Package Length: 6.299999993574".
  • Product 2: Item Package Width: 5.099999994798".
  • Product 2: Item Package Height: 2.399999997552".
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-13mm Drill Bits… (MR-13A)

  • Easy to operate and does not need any prior sharpening experience,foolproof design able to sharpen drill bit within minutes.
  • Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material.The machine comes with CBN grinding wheel as standard..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

Tulster IWB Profile Holster in Right Hand fits: Glock 26/27/28/33

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Adjustable positive retention point. When gun is fully holstered you get a audible and noticeable "click".
  • Holster has a full sweat shield to aid in re-holstering by giving you an indexing point and to keep clothing out of the opening..
Check Stock

Tulster IWB Profile Holster in Right Hand fits Glock 43/43X w/TLR-6

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Holster has a full sweat shield to aid in re-holstering by giving you and indexing point and to keep clothing out of the opening..
Check Stock

Tulster IWB Profile Holster in Left Hand fits Glock 43/43X w/TLR-6

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Holster has a full sweat shield to aid in re-holstering by giving you and indexing point and to keep clothing out of the opening..
Check Stock

Tulster IWB Profile Holster in Right Hand fits Glock 26/27/28/33 w/TLR-6

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Holster has a full sweat shield to aid in re-holstering by giving you and indexing point and to keep clothing out of the opening..
Check Stock

Tulster IWB Profile Holster in Right Hand fits: Sig P365 XMACRO

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Adjustable positive retention point. When gun is fully holstered you get a audible and noticeable "click".
  • Holster has a full sweat shield to aid in re-holstering by giving you an indexing point and to keep clothing out of the opening..
Check Stock

Tulster IWB Profile Holster in Right Hand fits: Sig P938 Holster

  • Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum..
  • Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon..
  • Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees..
  • Adjustable positive retention point. When gun is fully holstered you get a audible and noticeable "click".
  • Holster has a full sweat shield to aid in re-holstering by giving you an indexing point and to keep clothing out of the opening..
Check Stock