BOSTITCH Pin Nails, 23 GA, 1-3/16-Inch, 3000-Pack (PT-2330-3M)
- Pack of 1-3/16-inch 23 gauge headless pins.
- For use in the Bostitch HP118K and TU-216-2330 headless pinners.
- For Use in the Bostitch HP118K and TU-216-2330 Headless Pinners.
Check Stockuxcell 1/2" Drive by 19mm Deep Thin Wall Impact 6 Point Socket, High Carbon Steel Metric Sizes
- 【Size】1/2" square drive, 19mm 6-point socket, 134mm (5.3") total length..
- 【Thin Wall Design】Fits for narrow areas where traditional impact sleeves are too tight..
- 【6-Point Socket】The classic 6-point internal geometry has good strength and can be used with impact drivers or manual drive tools..
- 【Pin Hole】Individual pinhole base design adds extra security by placing in a locking pin for stability when exerting strong torque motion..
- 【High Carbon Steel】Forged with high carbon steel is good toughness and wear-resistant. Black oxidized treatment for corrosion-resistant..
Check Stock
EBESTTECH 1PC Adjustable 3 Point Hitch Pallet Fork 1500 lbs Capacity Attachments Category 1 Tractor Carry Forks For Home Farm Improvement
- 【QUICK AND EFFICIENT】1500lbs capacity 3 point-attach pallet fork can widely be used in farms, factories, and warehouses for highly efficient mechanical loading/unloading, stacking, and short-distance transportation to make easy handling of palletized loads It is an essential piece of farm equipment. Capacity up to 1500 lbs..
- 【HEAVY DUTY STEEL MATERIAL】The 3 Point Hitch Pallet Fork is made of high strength steel construction, a lightweight frame, and a strong gloss black powder coat, sturdy and durable. The pallet fork is the essential loader of attachments..
- 【PRODUCT SPECIFICATIONS】Our 3 Point Hitch Pallet Fork is 50" L x 55" W x 25.4" H. With a weight of approximately 91.7 lbs, the 3 point-attachment size is 25" W x 18.9" H. The size of the fork tines is 47" L x 3" W x 2" H..
- 【ADJUSTABLE 3 POINT HITCH PALLET FORKS】Our pallet forks can be adjusted between 29" to 40". Only need to determine the required size and distance, and then tighten the T-bolt..
- 【EASY TO INSTALL AND REMOVE】This pallet fork has a 3 point attachment. It includes 1 top pin and 2 bottom pins. Please refer to the specific installation position of your tractor and tighten the screws accordingly. This adapter also has a unique bottom pin design, easy to disengage. NOTE:....
Check Stock
Yalis Push Pins 600 Count, Standard Clear Thumb Tacks Steel Point and Clear Plastic Head
- Standard size push pins approx 1 inch, with clear pastic head and steel needle point.
- Perfect For Maps, Bulletin Boards, and Calendars..
- Used to pin important papers and messages to cork boards, foam boards, maps and more.
- Packed in reusable clear container jar to keep your desktop or your desk drawer organized.
- Super pack kit of 600 count in a jar.Description.
- Package included: 600 count clear push pins in a jar..
- These clear push pins crafted by YALIS provide excellent assistance in pinning your important papers and messages while keeping you organized. Durably constructed, these pins allow you to easily pin your supplies from the smooth plastic head of the metal pin without harming your hands by its sharp, steel point. The sharp end of the pin can be easily inserted into tough surfaces such as cork boards, bulletin boards, notice boards, maps and even to hang up personal decorations like posters! Ideal for work and home offices, classrooms, and dorm rooms, these push pins are essential for your office supply expectations. Stylish thumbtacks come in appealing, round package perfect for office organization. YALIS products are designed with you in mind!.
Check StockFiveStarCable 22-4 1000 Ft. 22 AWG 2 Pairs 22/4 Alarm Wire Cable 22 Gauge 4 conductors
- IMPORTANT NOTICE: Compatible with ARESGAME AGK750/AGK850/AGT850/AGT1000/GL1000 PSUs ONLY..
- This pci-e modular cables are non-interchangeable for AGS750 and AGS850 PSU..
- ATX 8 pin male end to connect to the power supply (NOTE: 8 pin male connector is ATX 8 pin, not pci-e 8 pin.).
- Two PCIE 8 pin(6+2) male ends to plug into the video graphics card. (These two 8pin are detachable, they could be used as a 8 pin or 6 pin by sliding on/off the 2 pin).
- Note: This replacement PCI-E cable is only designed for the brand and model as listed in the 1st Point. If you use other incompatible brand PSUs or models, it will burn or damage the PSUs or graphics cards. In this case, we won’t take any responsibility for unproperly usage or installation..
Check Stock
Titan Attachments 3 Point Tractor Drawbar Trailer Hitch Fits Category 1 Tractors Quick Hitch Compatible 8000 LB Towing Capacity Towable Clevis Hook 2 and 1 7/8 Ball Mount Included
- QUICK HITCH COMPATIBLE: This adapter is designed to fit a Category 1, 3 Point hitch with a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
- TOWING BALLS AND CLEVIS HOOK INCLUDED: The quick hitch compatible tractor drawbar comes equipped with a clevis hook for pulling items with a chain and hook, 2" ball which is standard fit for most utility trailers, and a 1-7/8" ball for smaller trailer applications. lso come equipped with the cat 1 top link pin..
- CAT 1 LIFT PINS AND TOP LINK PIN INCLUDED: The trailer hitch frame comes equipped with two lower Category 1 lift pins and a Cat 1 top link pin..
- DURABLE CONSTRUCTION: This frame is constructed with 3/8" thick structural steel that is rated at an 8,000 LB towing capacity. This thick steel is then powder coated to protect against rust and corrosion, so it continues to perform like new, time after time..
- DIMENSIONS: Weighing 36 LB, the tractor drawbar frame is 25.5" wide and stands 21.25" high. The included lower lift pins provide an overall width pin to pin of 32.5"..
Check Stock
4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades
- 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
- Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
- Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
- Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
- Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check StockMotoAlliance Impact Implements Pro Disc Plow/Harrow for ATV/UTV with 2" Receivers
- Eight (8), 12" notched, hardened steel cutter disc blades provide 54" of cutting width.
- Features a stable axle with two (2) heavy duty roller bearings per axle.
- Easy, one (1) pin mounting with the included pin.
- Requires Pro 1-Point Lift System, Sleeve Hitch Adapter or CAT-0 hitch (sold separately) for attaching to ATV/UTV and Lawn Tractors.
Check Stock
Titan Attachments 3 Point, Category 1 Tractor Drawbar Trailer Hitch Receiver Att
- HEAVYDUTY DESIGN: The Titan Attachments HeavyDuty Cat 1 3Pt Trailer Hitch Receiver is constructed with 2 x 2inch tubular steel..
- CAT 1 LIFT PINS AND TOP LINK PIN INCLUDED: The trailer hitch frame will come equipped with 2 lower Category 1 lift pins. It will also come equipped with the Cat 1 top link pin. The lower lift pins and top link pin are 2inch wide..
- SAVE TIME AND MONEY: The black 3 point trailer hitch for Category 1 tractor hitches is perfect for moving trailers around your land. Load your trailer with the various attachments you need, connect it to the 3 point trailer hitch and tow it behind your tractor. No need to waste time and money making multiple trips to get your tiller, landscape rake, chipper, and mower. Bring them all together at one time..
- POWDERCOATED STEEL: The Cat 1 Tractor Trailer Hitch is powdercoated black. The powder coating helps protect the attachment from rust and corrosion, keeping it looking and performing like new!.
Check StockWRAPXPERT Pin Pen Weeding Tool,2 PCS Retractable Weeding Tools for Vinyl,Sharp Vinyl Weeding Tool Air Release Pen for Wallpaper,Contact Paper
- This weeding pen is in awesome color,color shift from purple to blue,chrome metallic finish in nice glossy lustre,wonderful to add it to your vinyl weeding tool set..
- Super fine sharp needle point allows you to pick up the large and tiny vinyl pieces.A helpful pin pen weeding tool for adhesive vinyl,heat transfer vinyl to weed away negative parts..
- Pen-shape hold allows for a effortless and comfortable grip..
- This weeding pen is retractable,thus it is safe to use and easy to handle..
- The pin pen refill is replaceable.When the neddle point turns burnt after a long long time use,you can use a new tefill to replace the old one and make this pin pen tool last longer.Recyclable and friendly..
Check Stock
Sulythw 49” Hay Bale Spear 3 Point Trailer Hitch with 2\ Receivers for Category 1 Tractors with 2 x 17” Stabilizer Spears 3000lbs Capacity & 1-7/8'' Trailer Ball Gooseneck Drawbar
- 【Heavy Duty Design】The Sulythw 3 point hay spear is constructed with A-36 structural steel tubing. This heavy duty steel is then powder coated to protect against rust and corrosion so it continues to perform like new, time after time..
- 【Multifunction Application】Not only a trailer hitch, it can serve as a farm tool. As needed, you can install hay spears and stabilizer spears to help move hay bales or easily perform a myriad of other activities. This 3 point attachment is a multifunctional and affordable product, including 1x 49” hay spear and a capacity up to 3,000 lbs , and 2x 17” stabilizer spears..
- 【Easy Installation】This 3 point attachment includes top and bottom pins, top trailer ball and hay spear. 32.3" W x 19.48" H(Pin to Pin). After adhering to the installation position of the tractor and tightening the screws, the product will then work well. Prior to your purchase, kindly measure your tractor size..
- 【Double Trailer Design】The 3 point trailer hitch is designed for category 1 tractors and also accepts class 3 style hitches. With a standard 2" receiver hitch and trailer ball drawbar, you can fit numerous types of trailers. Widely used in heavy duty work of industrial and construction, the 3 point trailer hitch will easily sol....
Check Stock
4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks
- 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
- Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
- Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
- Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
- Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check StockTeamProfitcom Dual Mini 6 Pin to 8 Pin PCI Express Video Card Power Adapter Braided Sleeved Cable for Mac Pro Tower/Power Mac G5 15-inches
- Connector 1: standard GPU 8 Pin male . PCIe 8 pin male end to plug into the video graphics card - photo #2.
- Connector 2 : 2x mini 6 pin male ( not standard 6 pin male) !!! Dual mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size) !!! - photo #3, photo #4.
- Compatible with Power Mac G5 and all Mac Pro Models including: (1,1) - (5,1) or (2006) - (2012).
- Connects a PCIe video graphics card with GPU 8 pin port to Mac motherboard with mini 6 pin port.
- This cable was only designed for Mac Pro models as listed in the 2nd Point !!! Please check your PC type or contact us if you are not sure about it..
Check Stock
