Categories

Best Polishing Consumables

AUSTOR 77 Pieces Abrasive Wheels 1 Inch Buffing Polishing Wheel Set Polishing Wheel for Dremel Rotary Tool, 7 Grits

  • Plentiful quantity - package include 77 pieces abrasive wheel in 7 grits, 11 pieces for each grit.
  • the brown polishing wheel is 120 grit, the green is 180 grit, the red is 240 grit, the black is 400 grit, the thick white is 800 grit,the thin white is 1000 grit, two white grit abrasive wheel can be tell easily by touch.
  • Appropriate size - the dimater of the abrasive wheel is 1 inch (25mm), shank diameter is 1/8 inch (3mm), total length with abrasive wheel is 1.8 inch (46mm).
  • Wide application - different grits abrasive wheel are suitable for various of polishing on your demand, such as rotary rools, grinder, jewelry, cleaning grills, and removing paint.
  • Warm note - the abrasive wheel is consumables, so that we offer 77 pieces for replacement, 7 grits, 11 pieces for each grit.
  • Good for dents - AUSTOR buffing polising wheel help to achieve a smooth, evenly finish and conformability to irregular surfaces with minimal smearing.
Check Stock

Polly Plastics Rock Tumbler Media Grit Refill, Coarse 60/90 Silicon Carbide Grit, Stage 1 for Tumbling Stones (2 Pack) (2 lb.)

  • Belts are consumables, so we'd like to offer extra 5 belts for spare use. : @. ( )..
  • 2 Years Warranty - Special Bonus Just for You! The warranty covers accessories replacement, techical support, / and so on. ..
  • START A TUMBLING JOURNEY -- Koolstone Rock Tumbler turn rough rocks into polished gems, then you will be very excited to see the stones change with each cycle. That's a fun process of rock tumbling and a family little project for parent-child endeavor..
  • 2.5LB LARGE CAPACITY & 75% QUIETER -- An updated features is that KoolStone Rock Tumbler has a large 2.5LB capacity. Which allows to tumbler more rocks each time. Another improvement is the quieter barrel. Rubber material which has 75% quieter than most plastic barrel..
  • FASTER POLISHING TIME & BETTER POLISHING RESULTS -- 3-speed controls (providing more granular tumbling results), a 9-day timer (with automatic shutoff feature and memory function), all displayed on clear screen, letting you easily hone your settings for precise tumbling each time..
Check Stock

Yakamoz 2Pcs 2-Inch Roloc Sanding Discs Holder Roll Lock Disc Pad Quick Change Adapter with 1/4 Shank

  • Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank.
  • Compatible with 2-Inch Sanding Disc, Shank diameter: 1/4 inch, Maximum RPM: 30,000.
  • Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
  • Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables.
  • The high quality aluminum and the long-lasting rubber will provide sturdiness and strength.
Check Stock

2-Pack Disc Pad Holder Shank for Roloc - 2', for Polishing, Sanding, Surface Preparation, 1/4' Shank

  • 2 inch diameter holder (Pack of 2) for Roloc-type discs and pads..
  • Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank..
  • This sanding disk attachment with 1/4 shank fits power drills, die / air grinders and other power tools..
  • Used in conjunction with a Roloc Disc, this combination worked superb in removing gasket material and general sealing surface cleanup on aluminum heads, intake manifold, water pump and other aluminum components. Great for polishing, sanding, surface preparation, bristle and other disc consumables..
  • Rated 20,000 RPM, 1-1/2L shank, overall height 2-5/8.
Check Stock

Crossarctic 2 Inch Sanding Discs Holder Roll Lock Disc Pad Quick Change Disc Adapter with 1/4\ Shank for Die Grinder Power Drill Driver

  • Heavy-duty rubber pad, aluminum core with nickel-plated removable steel shank.
  • Compatible with 2-Inch Sanding Disc, Shank diameter: 1/4 inch, Maximum RPM: 30,000.
  • Threaded pad backs screw tightly onto the mandrel, and allow for quick and easy changes..
  • Accepts sanding, polishing, surface conditioning/preparation, bristle and other disc consumables.
  • The high quality aluminum and the long-lasting rubber will provide sturdiness and strength.
Check Stock

DAMO Variable Speed Stone Polisher Concrete Polisher Grinder 4 inch Wet Dry Polishing Kit for Light Color Granite Marble Soft Stones

  • The Sanding Discs Holder for discs and pads.
  • The 1/4-inch shank is designed for use with drills, air-powered die grinders, and other power tools and air tools.
  • Accepts most makes and models and for any type of use like: Sanding, Polishing, Surface Conditioning/Preparation, or bristle and discs that removes paints, residues, gaskets, welding slags, rusts and other disc consumables.
  • Constructed with metal shaft and bolt with rubber pad for flexible durability.
Check Stock

AUSTOR 100 Pieces 1 inch Abrasive Wheel Buffing Polishing Wheel Set Polishing Wheel for Dremel Rotary Tool, 4 Grits

  • Plentiful quantity - package include 100 pieces abrasive wheel in 4 grits, 25 pieces for each grit.
  • the grits are brown 120 grit, green 180 grit, red 320 grit, black 400 grit.
  • Size - abrasive wheel diameter 1 inch(25mm), shank diameter 1/8 inch (3mm), total length 1.8 inch (46mm).
  • Wide application - fit for various of polishing on your demand, such as rotary rools, grinder, jewelry, cleaning grills, and removing paint.
  • Warm note - the abrasive wheel is consumables, so that we offer 100 pieces for replacement while using.
  • Good for dents - AUSTOR buffing polising wheel help to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing.
Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead

  • Auto-voltage automatically adapts to 110 V – 240 V input power. Plug adapters included..
  • Comes with hard carry case, eye shields, gloves, shoulder strap, standard consumables and Fine Cut consumables..
  • Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material..
  • Auto-voltage automaticvally adapts to 110 V – 240 V input power. Plug adapters included..
  • Comes with hard carry case, ehe shields, gloves, shoulder strap, standard consumables and FineCut consumables..
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock