Best Polycrystalline Diamond
Diablo by Freud D0704DH 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor
- The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade.
- The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades.
- The laser cut thin kerf design gives fast and precise cuts with less dust and waste..
- Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
Check StockDEWALT Circular Saw Blade, 7 1/4 Inch, 4 Tooth, Cement Cutting (DWA3193PCD)
- synthetic polycrystalline diamond tipped teeth.
- Designed for cutting fiber cement and laminate/prefinished flooring.
Check StockLSHUZIYU 7-1/4\(185mm)-4PCD, Arbor 5/8\
- Diameter 7-1/4" (185mm), 4PCD, Arbor 5/8" with diamond washer. Max Speed RPM 10000.
- For Fiber Cement and Laminate Flooring, Very Sharp And Clear Cut.
- 4 Polycrystalline Diamond Tipped For Longer Cutting Life, Compared Carbide-Fiber Cement Blades 60X Times Longer.
- Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation.
Check StockBosch CB704FC 7-1/4 In. 4 Tooth Edge Diamond-Impregnated Carbide-Tipped Saw Blade
- The professional choice for cutting fiber cement material.
- Polycrystalline diamond tips for maximum life and dependability.
- Thin kerf, fully hardened body for fast, accurate results.
- Patented C-3 Dyanite carbide teeth are diamond ground to be precision sharp from the start and stay sharp up to 6X longer than standard carbide.
- Impact resistant tri-metal shims between each carbide tip and the blade act as shock absorbers in tough applications.
- A fully hardened thin kerf plate means less material is removed which allows for a faster cut while still remaining straight and true.
Check StockIRWIN 10-Inch Circular Saw Blade, Fiber Cement PCD, 6-Tooth (4935624)
- Polycrystalline diamond-tipped teeth will last up to 15X longer than standard carbide fiber cement blades..
- Thin kerf blade produces less dust than continuous rim blades..
- Ground and hardened plate body provides smooth and accurate cuts..
Check StockGhostrunner - PlayStation 5
- Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
- Perfect for slicing through fiber cement board and laminate flooring.
- Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
- Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
- Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check StockDiablo D1006DH Cement Saw Blade multi 10
- The only approved james hardier Polycrystalline diamond ( PCD ) tipped fiber cement saw blade. Developed by James hardy and Freud Diablo for all james....
- The PCD triple chip design offers up to 60 times longer cutting life than standard Carbide blades.
- The laser cut thin kerf design gives fast and precise cuts with less dust and waste.
- Item Package Dimension: 14.0" L x 10.0" W x 10.0" H.
Check StockTOMAX PCDM71404 7-1/4 Inch 4 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 5/8-Inch DMK Arbor
- Perfect for slicing through fiber cement board and laminate flooring.
- Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
- Ultra thin kerf (1.8 mm) provides efficient cuts and minimizes dust.
- Extra-large gullet design improves material removal and minimizes dust.
Check StockCastlerock CRPCD185 7-1/4 4 Teeth Polycrystalline Diamond-Tipped PCD Hardie Blade for Fiber Cement and Laminate Flooring
- Polycrystalline diamond (PCD) covers the entire tip.
- Over 1,000 cuts per blade. Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
- Perfect for multi-plank cutting, up to 5 planks at once.
- 7-1/4-inch diameter (184 mm) with 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
- Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
Check StockHarrier Guitar Nut Files Needle Fret Saddle Files Guitar Repair Luthier Tool Set of 10Pcs.
- A handy and versatile fret file set for your guitar repairing needs. Widely used for guitar nut, bridge, saddles, pin holes, pickguard, fret and more..
- Various shape, equaling flat, square, round, half round, elliptical, triangle and more..
- Metal body, anti-skid rubber handle, polycrystalline diamond coated files, the files are effective on wood, bone, and soft metals such as brass,....
- Designed to cut quickly and smoothly, cover full range shaping, forming, carving, engraving and material removal..
- Approx. 160mm length, 4mm blade thickness. Set of 10 pcs, 100% brand new and high quality..
Check StockTWIN-TOWN PCDT1208 12 Inch 8 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 1 Inch Arbor
- 12" Inch x 8 PCD Teeth-Polycrystalline diamond teeth for extreme durability, sharp cuts, and long life.
- Ultra thin kerf (2.4 mm) provides efficient cuts and minimizes dust.
- Laser-cut Anti-vibration Vents absord noise and vibration, and prevent sideways movement.
- Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts.
- Suitable for cutting fibre cement boards and ultra hard materials – HardiePlank, Eternit, MDF and Corian.
Check StockWEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring
- Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
- Perfect for slicing through fiber cement board and laminate flooring.
- Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
- Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
- Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check StockTWIN-TOWN PCDT1006 10 Inch 6 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 5/8 Inch Arbor
- 10" Inch x 6 PCD Teeth - Polycrystalline diamond teeth for extreme durability, sharp cuts, and long life.
- Ultra thin kerf (2.2 mm) provides efficient cuts and minimizes dust.
- Laser-cut Anti-vibration Vents absord noise and vibration, and prevent sideways movement.
- Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts.
- Suitable for cutting fibre cement boards and ultra hard materials – HardiePlank, Eternit, MDF and Corian.
Check Stock