Best Polyethylene Fitting - TopShopReview.com

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (40 Gallon & 55 Gallon) | RV Water Holding Tanks

Combo Pack of RV Fresh & Gray Water Tanks, 40 Gallon & 55 Gallon.
NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material..
These 40 gallon and 55 gallon tanks each have two 1 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1/2" female NPT fittings (fitting is not closed, this fitting is completely open).
40 Gallon Tank Measurements - 39 1/2" x 18" x 13" (+/- .25").
55 Gallon Tank Measurements - 37 1/2" x 19 1/2" x 17 1/2" (+/- .25").

SIZE & DEPTH – Exterior measures 26″ x 18″ x 15″ (86 quart capacity).
DURABLE MATERIAL – BPA-free white polyethylene (Dur-x Food Boxes) for more economical storage and transport applications (HDPE).
ROUNDED CORNERS – Easy for cleaning and maneuverability.
COMMERCIAL DISHWASHER SAFE – These totes are safe to run through commercial and consumer dishwashers.
DATE CONTROL PANEL – Boxes and lids offer panel to control dates for food spoilage.
LIDS AVAILABLE – Snap tightly for food storage.
FREEZER SAFE – All boxes and lids are freezer safe.
White, durable polyethylene for more economical storage and transport applications.
Tight-fitting snap-on lids (sold separately) keep food fresh.
Date control panels on boxes and lids for easier inventory control.
Available in standard industry sizes to accommodate existing storage racks, counters, etc.

Direct jet allows water stream to rinse and flush RV sewer systems.
Rhino Blaster Tank Rinser firmly attached to RV sewer outlet via bayonet swivel fitting.
Vacuum breaker averts backflow into water hose.
Clear 45 degree elbow allows direct flow of water into sewer system.
Break-resistant polyethylene is sturdy and durable.

Black polyethylene for light weight. Four sizes of inlet fittings available. Can be modified for additional fitting for dual vent hoses.
Package Dimensions: 37.2 H x 9.8 L x 21.8 W (centimetres).

Extra thick high density polyethylene tray with uv stabilizers.
16 heavy duty wheel assembly with grease fitting with 6 wide 4 ply turf tireSpecifications.
Produced with the highest grade materials.

I.D.: 1 1/8" or 28.6mm, length: 50' or 15.2M, Bend Radius: 1" or 25.4mm, VAC rating: 20, color: White.
Note: Do not attach to thru hull fitting below the water line.
Shields Bilge flex Hose is a single layer corrugated polyethylene hose.
It is resistant to mild chemicals and salt water and there is a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.

【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
Type: 90 Deg Swivel Elbow Male Connector.
Tube and Thread Size : 4mm OD x 1/8" NPT Male.
Operating temperature：-10 - 60 Degree Celsius.
【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..

【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
Type: 90 Deg Swivel Elbow Male Connector.
Operating temperature：-10 - 60 Degree Celsius.
【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..

【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
Type: 90 Deg Swivel Elbow Male Connector.
Operating temperature：-10 - 60 Degree Celsius.
【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..

【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
Type: 90 Deg Swivel Elbow Male Connector.
Tube and Thread Size : 12mm OD x 1/4" NPT Male.
Operating temperature：-10 - 60 Degree Celsius.
【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..