Best Polymer based Adhesive
Master Magnetics 40100 Flexible Magnet Business Card Size with Adhesive Back, 30 Mil Thick, 2\ Wide, 3-1/2\ Length (Pack of 100)
- Flexible magnets are 30 Mil thick about the same thickness as 8 pieces of stacked copy paper and are laminated with a sticky, rubber based, pressure-activated adhesive suitable for indoor applications.
- Designed to hold 1 paper business card to flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets.
- Contains 100 each pre-cut, 2" x 3-1/2" size magnets with a tolerance of +/- 1/16" on both dimensions.
- Magnet is made of rubber polymer resin, dry mixture of ferrite and is laminated on one side with an aggressive, general purpose rubber based pressure-activated adhesive covered by peel-off liner.
- Simply cut with scissors, utility knife, or paper trimmer. Made in USA.
Check StockSta-Lube Marine Grease for Boat Trailer Wheel Bearings 14-Ounce
- Blue, tacky, aluminum complex grease with a highly refined base oil.
- Formulated with a polymer to provide adhesive, non-blend and water wash-out characteristics.
- Resists water under the most severe water conditions.
- Applications: 4WD, boat trailer, marine equipment, and more.
Check StockAmazon Basics Packing Tape Designed for Moving Storage and Packing Shipping and Mailing 2.83-Inch Wide x 54.6 Yards Crystal Clear 6-Pack
- 6-pack of moving and storage packing tape for easily wrapping and keeping boxes securely closed.
- Completely clear for a professional appearance on boxes or when taping over address labels.
- Made of strong BOPP material with a water-based acrylic polymer adhesive.
- adhesive bond gets stronger over time for a long-lasting reliable hold.
- Can be used with a tape gun for easy dispensing (not included).
- helps keep valuables safe, whether moving, shipping, or storing.
Check StockAmazon Basics Packaging Tape for Shipping, Moving and Storing, 1.88' x 54.6 yds, 12-pack
- 12-pack of clear packaging tape rolls for sealing boxes, securing address labels, and more.
- High-performance holding power with acrylic polymer water-based adhesive.
- Crystal clear construction offers professional, clean look.
- Holds up to shipping, handling, long-distance transit, and storage.
- Can be used with 3 inch dispensers or tape guns to cut tape at the desired length.
Check StockPolyform Sculpey Artist Set: 2 Ounces Bake and Bond Bakeable Adhesive for Oven-Bake Clay, 1 Ounce Satin Glaze, 1 Ounce Gloss Glaze
- 3-PACK ARTIST SET – This Artist Set includes 1 x Bake and Bond Bakeable Adhesive for Oven-bake Clay, 1 x Satin Glaze, and 1 x Gloss Glaze..
- 1 x BAKE & BOND – This adhesive bonds two pieces of polymer clay. Available in 2 ounces..
- 1 x SATIN GLAZE – The satin glaze adds a strong seal to baked clay items. Available in 1 ounce..
- 1 x GLOSS GLAZE – The gloss glaze adds a durable finish to baked clay items and is compatible with acrylic-water based finishes. Available in 1 ounce..
- FOR ALL CLAY ARTISTS – The Sculpey Artist Set is suitable for all clay artists, beginners and advanced users alike..
Check StockArt Glitter Glue Designer Dries Clear Adhesive 2 oz with Ultra Fine Metal Tip
- INDUSTRIAL STRENGTH Designer Glue - 2 oz Bottle.
- GREAT FOR CRAFTERS, STAMPERS, AND SCRAPBOOKERS!.
- ADHERES TO A VARIETY OF SURFACES such as paper art, acetate transparency, cling vinyl, acrylic, leather, pleather, suede, ceramics, feather quills, wood, metal, polymer clay, shrink plastic, artificial and dried floral's, glass, beads, rocks, shells, non-washable fibers, leaves, concrete and most surfaces.
- WATER BASED ADHESIVE - Product Can Be Damaged If Shipped In Weather Under 40⁰.
Check StockThermal Grizzly Kryonaut Thermal Paste, 5.55g
- Those thermal pads are made from a carbon-based polymer with nanoparticles.
- They have a high thermal conductivity of 62.5 W/mk.
- The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
- The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
- The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
- Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
- Carbonaut is an electrical conductor - avoid contact between thermal pad and transistors or transformers.
Check StockLizard Skins DSP Ultra 0.5mm Bat Grip – Next-Gen Durasoft Polymer Baseball & Softball Bat Tape (Vice Camo)
- With One Touch Our Polymer Stands Out, Lizard Skins leads the hand to grip interface because of our patented polymer.
- 0.5mm Thickness - Preferred thickness among pro hitters, provides increased feel and direct feedback on contact, reduced thickness limits bunching on the bat handle, most common thickness used on wood bats.
- Game-Changing Tackiness and Durability with our new Next-Gen Durasoft Polymer and texture.
- New oval pattern with added multi-directional ridges for better performance and a reformulated polymer for enhanced feel and durability.
- New Premium Adhesive Back for easy install with new installation call-outs on the grip - Designed to fit any and all Baseball & Softball Bats, including wood, composite, and aluminum.
Check StockFrogtape 1358463 .94\ X 60 Yards Green Multi-Surface Painter's Tape
- ...any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape..
- Carrier/Backing: fine structured crepe paper. Adhesive: rubber-based. Thickness: 5.6 mils (carrier, adhesive). Adhesion: 32 ounces per inch (to stainless steel test panel). Tensile Strength: 27 pounds per inch (longitudinal). Service/Operating Temperature: 50F to 200F. Elongation: 8%. Core: 3-inch diameter..
Check StockKevlar Repair KIT
- 2 x evo stik stick serious stuff ultra grab adhesive glue C20 290ml cartridge 663770.
- Suitable for use on wood metal brick glass plaster plastics ceramics & almost any other material.
- MS Polymer technology. Coverage approx 14.5m using a 5mm bead.
- The strongest waterproof grab adhesive you can buy! It will stick almost anything to anything.
- solvent free, suitable for interior & exterior use.
Check StockCPU-Cooler Thermal Grizzly Carbonaut Wärmeleitpad - 38 × 38 × 0,2 mm
- Those thermal pads are made from a carbon-based polymer with nanoparticles.
- They have a high thermal conductivity of 62.5 W/mk.
- The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
- The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
- The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
- Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
- Carbonaut is an electrical conductor - avoid contact between thermal pad and transistors or transformers.
Check StockSculpey Artist Set: 1 Fl Oz Gloss Glaze, 2 Fl Oz Bake and Bond Bakeable Adhesive for Oven-Bake Clay, 2 Fl Oz Translucent Liquid Bakeable Clay - Pack of 3
- 3-PACK ARTIST SET - This Artist Set includes 1 x Gloss Glaze, 1 x Bake and Bond Bakeable Adhesive for Oven-bake Clay, and 1 x Translucent Liquid Bakeable Clay..
- 1 x GLOSS GLAZE - The gloss glaze adds a durable finish to baked clay items and is compatible with acrylic-water based finishes..
- 1 x BAKE AND BOND - This bake and bond bakeable adhesive for oven-bake clay forms a strong bond between two polymer clay pieces. It will stick two pieces together even with only a little pressure without having the details and shapes distorted..
- 1 x TRANSLUCENT LIQUID BAKEABLE CLAY - This transparent bakeable clay makes added designs perfectly visible. Can be used as coating for a resin-like finish..
- GREAT FOR ALL CLAY ARTISTS - The Sculpey Artist Set is great for all clay artists, beginners and advanced users alike. Each bottle is marked with a manufacturing date, there is no expiration date for these products..
Check Stock3M Gripping Material TB641, Black, 1 in x 15 ft
- Soft, adhesive backed gripping material designed to stick on contact.
- Acrylic pressure sensitive adhesive designed to bond to a wide variety of surfaces.
- Soft, thermoplastic elastomer gripping polymer provides high friction properties with increased cushioning, comfort, flexibility and softness.
- When mated, delivers high coefficient of friction properties, even in wet conditions.
- Designed to provide slip resistance and easy-release properties.
Check Stock