Categories

Best Pop Socket Holder For Car Dash

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • ... When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
  • Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous surfaces. 3.The 3M VHB adhesive pad for dash mount phone holder is one-time use. 4.Please wait at least 24 hours ensure the sticker get the best stickiness. 5.This magic mount adhes....
Check Stock

Nite Ize Steelie Dash Mount Kit Plus - Magnetic Car Dash Mount for Smartphones with 2x Holding Power and Restickable Magnet Adapter

  • MAGNETIC CAR PHONE HOLDER FOR YOUR DASH, HANDS-FREE VIEWING - Dock your phone to your dashboard in a snap, with a sleek and compact design using Steelie magnetic mounting technology. Secure just about any phone to most any car dash.
  • RESTICK YOUR MAGNET MULTIPLE TIMES - The included MultiStick Adapter allows you to easily reposition your magnet or move it between cases - hardshell case required for glass-backed phones. Or attach the magnet using the included 3M VHB adhesive.
  • ADJUSTABLE VIEWING ANGLES - The Dash Mount features a steel ball that articulates with the Steelie Magnetic Phone Socket Plus on your device allowing you to tilt your phone smoothly from landscape to portrait and everywhere in between.
  • POWERFUL, HIGH-STRENGTH MAGNET - The Magnetic Phone Socket Plus offers twice the holding power of our standard-sized magnetic socket making it perfect for both standard and plus-sized phones. Uses powerful neodymium magnet.
  • SAFE FOR USE WITH PHONES - The powerful magnet will NOT damage your mobile device and can also be paired with GPS units and MP3 players. However, do not place it near magnetically sensitive objects such as credit cards, computer hard drives, or pacemakers.
Check Stock

Suction Cup Phone Mount for Socket User, pop-tech Dashboard Car Phone Holder Cradle for Collapsible Grip with 7.5 Inch Long Arm Gooseneck & Anti-Shake Stabilizer Compatible with iPhone Samsung Galaxy

  • Perfect Fit for Socket Top - The multi-function automobile long arm phone holder cutout with u grip and downward shape we design is made of silicon and plastic combination with heat resistant and removable 3m sticker adhesive stick on. Soft silicone accommodate premium socket grips compressed and wallet plus easily glide into the slot hole and quick removal, even won't scratch like the plastic one. Great automotive accessories fits for official swappable collapsible grips & stand..
  • Ingenuity & Double Stability - Extra strong vacuum suction cup with antislip and super stick self-adhesive sticky gel, anti-shake stabilizer prevent android phone from vibrating and shaking, sticking it clamp more stable and lockable, apps to hold and tight your cell phone/tablet sturdy built in the car dash board or dashboard/window shield or windshield on multiple surface on desktop, countertop, desk or multi-surface as multipurpose phone holder sliding into the movable expanding grip..
  • Multifunctional & Flexible Bendable Arm - Universal long arm socket holder with sticky stuff allows you to attach and adhere to the cellphone within reach and adjust the flex extendable neck. Functional cell phone windshield mount with adhesion support for smart phone. Adjustable goose neck....
Check Stock

GOTWINY Pop Grip Car Phone Mount, Universal Air Vent Socket Mount Stand-Ultra Stable Vent Clip, Secure Grip Cell Phone Holder Car Mount for GPS Navigation-360 Rotating Head Fits All Smartphone

  • [Designed for Collapsible Socket]-This Car Grip Phone Mount is designed to hold phones with collapsible socket stand on its back. Compatible with any smartphone including iPhone 12 11 Pro Max XS MAX/XS/XR/X/8/8plus/7/7plus/6/6S, Samsung Galaxy S9, S8, S7, Note 9, HTC, LG, OnePlus, Moto G5, Google Pixel and more. (Collapsible Socket stand is not included).
  • [Never Fall Off, Double Stable Vent Clip]: The vent clip mount is designed with a combination of ''Hook Shape'' and ''Three Grasp Points'' on amazon. [ Stronger & Tighter ] The clip hook will catch one of the car air vent blades to achieve absolute fixation. This car phone holder has ''Three Grasp Points'' with thickened shockproof sponge and rubber, which could hold the phone steadier than others. Even on some rough roads, it can hold your phone firmly.
  • [360° Rotation & One-hand Operation] Simple one-handed operation. Press flat the socket mount on your phone and then slide it into the car grip mount.
  • easy to put it on or take it off quickly. The 360-degree rotation of pop out stand phone holder vent clamp provides with the best viewing angle to ensure a nice driving experience for you..
  • [STRONG AND SECURE ] Our car grips phone holder is the highest quality car socket phone mount. The clip phone moun....
Check Stock

Suction Cup Phone Holder for Socket Users pop-tech Dashboard Car Phone Mount for Collapsible Grip with Adjustable 360°Rotation Includes 3M Sticky Adhesive Replacement for Expanding Stand - Black

  • Strong Adhesive with Suction Power - Bendable suction cup phone holder for socket mount hole with sticky pads aims down the dash and do not obstruct....
  • Compact & Flexible Design - Small size will not block your view or air outlet in the vehicle. The foldable and adjustable arm with knob allow you to....
  • 360 Degrees Rotation - Heavy duty mountable dashboard car phone mount slot with rotating swivel ball joint to adjust and rotate it even 90°degree....
  • Super Easy To Install - Connect the screw with mount, put the cellphone to screw on. Please make sure mounted on flat and smooth spot in car dashboard....
  • What You Get A Set Combo - New black pop-tech luxe suction cup phone mount brackets fits for premium collapsible grip stand low profile, additional 2....
Check Stock

Cell Phone Holder for Car, Upgraded 360° Rotatable Phone Mount for Dashboard, Horizontal & Vertical Viewing Friendly Phone Car Mount, Compatible with iPhone Samsung Android Smartphones GPS Devices

  • ...r iPhone 13/13 Pro/13 Pro Max/12/12 Pro/12 Pro Max/11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/6s plus/6/5, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, Huawei, Mi, Garmin etc. Even with case on device. （Pop socket case can NOT fit！）.
  • 【Perfect Protection, Washable & Reusable】: The new version of car cell phone holder made of environmental friendly ABS material, can be universally mounted to dash. The bottom of phone holder is made of high-tech adhesive, reusable and washable, without leaving any residue on the dashboard. Use a soft silicone bottom and a sticky rubber pad to prevent your phone from being bumped, scratched. （Note: Clean and dry the surface with a cloth before installation）.
  • 【Secure & Stable for Various of Cars】: The phone mount for car is a good choice to most of the cars, pickup trucks, SUV, trucks, taxis.
  • good assistant for Uber, Lyft drivers. It can be firmly fixed on the dashboard of various cars, whether your car is driving on highways, urban roads, speed bumps, suburban roads, deserts, whether it is hot summer or cold winter, it can accompany you to travel..
  • 【360° Rotation, Anti-sunlight reflection】: The ....
Check Stock

TOMALL H7 LED Headlight Bulb Retainers Holder Adapter for Mazda CX5 CX7 Low Beam

  • Bulb holder fits for:Bulb holder fits for:Mazda CX5 CX7.
  • Used for H7 Halogen upgrade to LED bulbs installation.
  • PLEASE CHECK YOUR CAR’S MODEL BEFORE PURCHASE. If you are unsure whether this product is compatible with your vehicle,just pop up the hood and compare this product with the stock headlamp socket.
  • Why need this adapter? Because the LED bulb can’t be installed steady When you replace the origin car bulbs,and our adapter is design for solve this problem.
  • Allow you to place the aftermarket H7 LED bulb firmly,quickly back to the original headlamp housing without destroying the original socket..
Check Stock

Anti Skid Car Dashboard Sticky Pad, Anti-Skid Car Dashboard Sticky Pad with Phone Holder, Multi Dashboard Sticky Pad Anti Slip Mat for Car, Peachloft Pad Dashboard Cell Phone Holder (3PCS)

  • Multi-function: This non slip car dashboard mobile holder organizer for keys, coins, cards, pens mat uses multi-function devices. Car phone holder / car storage pad / vehicle temporary parking mobile number pad/ mobile navigation bracket. This car accessories organizer comes with a temporary parking phone numbers sheet that can be attached to the corresponding number slot for temporary parking..
  • Easy To Use: Just clean your car dashboard and put it on. The car dashboard sticky mobile holder mat pad is made of strong, durable and material, strongly fixed on the surface of the object. No glue, adhesive, or magnet needed and will not leave any marks or smudges on your car dashboard or surfaces. This anti skid car dashboard sticky pad can be taken off from the car dash easily. Sticky silicone material of this mobile holder mat for car dashboard is not permanent attachment to the dash..
  • Universal Compatibility: The anti slip car dash mat phone holder structure-proof flexible and Non-Slip mobile phone pad holder car cell phone holder is applicable for mobile phones ranging from 4 to 7 inches such as all mobile phone or other devices, Integrated supports brings your smartphone in a comfortable viewing angle-perfect to use the phone as satellite navigation..
Check Stock

Nite Ize Steelie Orbiter Dash Mount Kit - Magnetic Cell Phone Holder for Car Dash, Low Profile, No Attached Magnets

  • Magnetic Phone Mounting Technology For Your Car Dash, No Attached Magnets – Dock Your Phone To Your Dashboard In A Snap With The Low Profile Steelie Orbiter Magnetic Mounting Technology.
  • There Are No Magnets Attached Directly To Your Phone.
  • Universal Secure Attachment To Phone, Case + Car- Metal Plate Easily Attaches To Most Rigid Phone Cases Using 3M Adhesive.
  • Attaches To Almost Any Dash- The Orbiter Magnetic Socket Lives On The Dash Mount Allowing Quick And Secure Connection To Your Phone.
  • Adjustable Viewing Angles - The Dash Mount Features A Steel Ball That Articulates With The Steelie Orbiter Magnetic Socket Allowing You To Tilt Your Phone Smoothly From Landscape To Portrait And Everywhere In Between.
  • Powerful, High-Strength Magnet - The Neodymium Magnet And Silicone Center Create A Strong Grip And Smooth Glide When Paired With The Steelie Dash Mount For Safe Use Even When Driving On Bumpy Roads.
Check Stock

Air Vent Phone Holder for Socket Mount pop-tech 360° Rotation Vent Clip Car Mount Silicone with Adjustable Switch Lock for Collapsible Grip / GPS Navigation & 3M Sticky Adhesive for Expanding Stand

  • Switch Lock Design - Universal socket car vent mount has a swivel feature for better adjustment according to the changeable vent widths. The strong....
  • Adjustable 360 Rotation - Car vent clip phone holder accomodates for socket that support you to rotate the android at unobstructed viewing from....
  • Durable & Sturdy - Flexible silicone air vent car mount cutout work with collapsible grip & stand is made of soft rubber and well made extremely to....
  • Easy To Use - Put screw to the rotating swivel ball joint and connect to the pivoting socket car vent mount, insert into the circular air vent outlet.....
  • What You Get Rich Combo - pop-tech single amazing locking air vent car mount plain black compatabe socket mount users & heat resistant 2 pack....
Check Stock

Nite Ize Steelie Orbiter Plus Dash Kit, Compatable With MagSafe Car Mount for iPhone 12, 13, Pro Max, Mini

  • FOR MAGSAFE - The Magnetic Socket is designed to perfectly align with the magnets inside MagSafe iPhones, cases and chargers, connecting your phone to the Dash Mount for hands-free viewing in your car.
  • POWERFUL, HIGH-STRENGTH MAGNET - The neodymium magnet and silicone center of the Orbiter Plus Magnetic Socket provides a strong grip and smooth glide when paired with the Dash Mount, keeping your phone mounted through every twist and turn.
  • STICKS TO YOUR DASH WITH 3M ADHESIVE - The high quality, steel ball Dash Mount attaches to any smooth, flat surface on your dash with the included 3M VHB adhesive, and won't damage your dash when it's time to remove.
  • ADJUSTABLE VIEWING ANGLES - The Dash Mount features a steel ball that articulates with the Magnetic Socket on your MagSafe phone, allowing you to tilt your phone smoothly from landscape to portrait and everywhere in between.
  • MOUNT WHILE CHARGING - The Metal Ring allows you to charge your phone with a MagSafe charger while staying mounted - simply adhere the ring to the back of your charger with the included 3M adhesive t....
Check Stock

VOLPORT Extra 3M Super Sticky Adhesive and Phone Magnet Sticker Disc Replacement Strong for Reusing Grip Stand Socket Base, Circle Double Sided Car Mount 3M Tape Glue Pads Round Magic Metal Plate Disk

  • DESIGN FOR PHONE SWAPPABLE GRIP&STAND: VOLPORT brand multiple 3M circular double side tapes sticky adhesion disk is designed for repairing expanding phone ring holder and replace magnetic phone car mount. Heavy duty two sided circle stickies adhesives fit regular size collapsible socket stand base & replaceable dashboard car holder’s back.
  • metal plates can be fit inside of lids or outside of the caps top. Best backup replacement adhesive parts to reattach socket grip to new iphone 11 case..
  • STRONG DOT ADHESIVE STICKY REPLACEMENT: We adopt original 3M VHB super adhesive black gel, stickiness is 40% stronger than cheap universal glue, high temperature resistance in hot Summer. 6pcs big round double side tape sticky foam adhesive tabs stuff for resticking collapsible grip and finger rings stand.
  • 2pcs additional high bond small dots mini circle discs attachment for reusing the bottom of phone socket mount, repositionable magnetic dashboard car phone mounts, reinforce dash cam mount..
  • HOW TO REPLACE ADHESIVE: 1. remove old adhesive and clean surface with alcohol prep pads, let dry, then stick adhesive on holder. 2. peel off the red backing film, this is the most difficult part, many customer said the adhesive part with come up with when pe....
Check Stock