Categories

Best Porcelain Hole Saw

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

6MM Diamond Hole Saw Tile Drill Bits Tool for Glass Slate Porcelain Marble

  • Set of 10 pieces, hole size is 6mm(1/4").
  • Diamond hole saw tile ceramic glass porcelain marble drill..
  • Always use lubrication (water), if not the diamond core will over heat amd blunt..
  • Use for conventional power drills on the low speed setting with the hammer action disabled..
  • These are auiable for drilling ceramic tiles, glass, marble, slate and porcelain tiles up to hardness grade 5..
Check Stock

Hole Saw Set 7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture 1-3.15 inch Coated Core Drill Bits Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable..
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken....
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws..
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes....
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone.
Check Stock

4-1/2 inch Diamond Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank for Cordless Electric Drills 4.5 inch Diameter Includes Positioning Guide Template

  • Durable 4.5 inch core drill bits for concrete, exactly 4.5 inches diameter. Tool Life: 7 to 10 holes in concrete..
  • Concrete hole saw 4-1/2 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 4-1/2 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Includes Positioning Guide Template Also Holds Cooling Water.
  • Laser welded diamond concrete core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

1 inch Diamond Drill Bit Concrete Diamond Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools

  • Industrial heavy duty, commercial quality, durable 1 inch core drill bits for concrete, exactly 1 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1 inch concrete core saw hammer drill bits for concrete.
  • Laser welded concrete hammer core bit fits your standard drill..
Check Stock

Diamond Hole Saw 50mm 2 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

  • Diamond drill bit is diameter of 50mm 2 inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

Diamond Hole Saw 60mm 2-3/8 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

  • Diamond drill bit is diameter of 60mm 2-3/8 inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Diamond Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone (110mm 4.33inch)

  • Diamond drill bit is diameter of 110mm 4.33inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • ... In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To Cool The Material, This Will Also Pevent Heat Build Up In The Diamond Bits..
  • Use As Granite Drill Bit With Drill Guide, With The Diamond Drill Bits Ceramic Glass Porcelain And Granite Can Be Drilled Through As Long As The Bits Are Kept Cool. Do Not Spray Water Onto Side Of Porcelain Drill Bit Set As That On....
Check Stock

1 1/4 Diamond Hole Saw Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools 1-1/4 inch Diamond Drill Bit

  • Industrial heavy duty, commercial quality, durable core drill bits for concrete, exactly 1-1/4 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1-1/4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1-1/4 inch concrete core saw hammer drill bits for concrete.
  • Concrete hammer core bit fits your standard drill..
Check Stock

2 inch Diamond Hole Saw for Concrete Masonry Cinder Blocks Stucco Granite Quartz Marble Core Drill Bit Heavy Duty Dry or Wet Drilling Standard Shank Extra Deep Depth of Cut

  • Commercial quality, durable 2 inch core drill bits for concrete, exactly 2 inches diameter.
  • 2 inch Diamond hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 2 in concrete hole saw dry or wet use drilling holes in stucco, concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • 2 inch concrete core saw diamond drill bits for concrete.
  • Concrete core bit fits your standard drill with no adapter needed.
Check Stock