Categories

Best Port Air Manifold

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock

PHITUODA 1\\/2 3 Ways 6 Ports Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting with Pipe Sealant Tape - Pack of 2

  • *Package Included: 2 x Air Hose Manifold Block, 2 x Pipe Sealant Tape. Position: 3 Ways. The number of Threaded Ports: 6 Ports. Threaded Port Dia: 1/2" BSPT..
  • *Premium Material: The manifold body is made of high corrosion-resistant anodized aluminum with a sky blue brushed nickel finish, which makes it not easy to deform, more durable, and 50% lighter than standard fittings..
  • *Practical Design: The operating pressure is 0 to 1MPa / 145 PSI. Guaranteed pressure resistance is 1.2MPa / 175 PSI. The max working pressure is 2MPa / 300 PSI. The working Temperature is 32 - 140 ℉ / 0 - 60 ℃..
  • *Ideal Application: Manifold Block takes one line of air from a pump, air cylinder, compressor, vacuum engine, or other such system and splits it into many of them. All ports are in the same size so that you can use it as a 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirement..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!.
Check Stock

Air Compressor Pressure Switch Control 90-125 psi Single Port HEAVY DUTY 26A Replaces

  • 【Product Description】This is a pressure switch, control valve with a single port connection manifold,This single port pressure switch is an excellent replacement for damaged or old pressure switches..
  • 【Application Areas】This universal pressure switch is suitable for 90-125 Psi 26A air compressor..
  • 【Switch Features】This is similar to the regular single port pressure switch, Not only this switch is equipped with heavy duty 26A contacts but also to provide a longer lasting switch in demanding applications, is your best choice..
  • 【Excellent Material】Switch made of high quality material, with long mechanical life,Corrosion Resistant..
  • 【Product Easy To Use】The pressure switch is easy to operate and convenient to use with the air compressor..
Check Stock

New Air Tool Parts 034-0184 Pressure Switch Powermate/Craftsman Air Compressor 155/125 PSI

  • 【Product Description】This is a pressure switch, control valve with a single port connection manifold,This single port pressure switch is an excellent replacement for damaged or old pressure switches..
  • 【Application Areas】This universal pressure switch is suitable for 90-125 Psi 26A air compressor..
  • 【Switch Features】This is similar to the regular single port pressure switch, Not only this switch is equipped with heavy duty 26A contacts but also to provide a longer lasting switch in demanding applications, is your best choice..
  • 【Excellent Material】Switch made of high quality material, with long mechanical life,Corrosion Resistant..
  • 【Product Easy To Use】The pressure switch is easy to operate and convenient to use with the air compressor..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

VIVOHOME 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit with 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump

  • PACKAGE INCLUDES - 1* 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit for HVAC Air Conditioning Refrigeration Recharging ETL Listed.
  • 1* 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump with Oil Bottle ETL Listed.
  • HEAVY-DUTY VACUUM PUMP - Made of die-cast aluminum housing and a composite anti-slip rubber base, which is lightweight and durable.
  • Perfect for those who are looking to self diagnose or recharging AC systems.
  • It maintains air conditioning systems by efficient removing moisture before refilling the refrigerant.
  • CONVENIENT TO OPERATE - VIVOHOME air vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.
  • The oil drain valve at the bottom ensures faster and more thorough emptying.
  • 1 bottle of 500ml vacuum oil is also included.
  • MANIFOLD GAUGE SET - Manifold gauge set is designed specially to measure pressure in refrigeration equipment.
  • Manifolds are equipped with large viewing glasses for easy viewing of refrigerant flow, and high-quality colorful pressure gauges ensure accurate readings.
  • WIDELY USED IN VARIOUS SYSTEMS - The intake filter can effectively prevent im....
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

Fieldpiece SM380V SMAN manifolds, Black

  • Toughest, most advanced digital refrigerant manifold on the market.
Check Stock

Secbolt Pressure Switch Manifold Regulator Gauges Air Compressor Pressure Switch Control Valve 90-120PSI (American Pattern)

  • Auto control. Cut off at 120PSI, Turn on at 90PSI. Port Size of the Switch: 1/4" NPT, 4 Female Ports.
  • ADJUSTABLE AIR OUT: air pressure from one of the brass coupler is adjustable.
  • Heavy duty LEFOO Air Compressor Pressure Switch + Valve Gauges Regulator.
  • Thick material makes solid quality manifold.
  • Comes with threadlocker. Easy to use, easy to assemble.
Check Stock

Air Manifold, 5 Way 8 Port Air Compressor Manifold, Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Manifold Air Distribution Block, NPT 1\\/4 Inch Supply Port, NPT 1\\/4 Inch Output Port

  • Bring Convenience: When your air compressor need to feed several different systems, this product is what you need. Rather than being forced to constantly change connections, you can instead a single hose with this manifold of multiple ports, a really functional product..
  • Excellent Quality: The air manifold is made of aluminum alloy, which is highly corrosion-resistant, not easy to deform, durable and lighter than other material. The ports are based on standard size for easy mounting..
  • Working Parameters: The working pressure is 0-1MPa, maximum working pressure is 1.2MPa, working temperature is 32 - 140 °F. If you want to know more about the products, please feel free to contact us..
  • Easy to Use: Unlike other manifolds on the market, our air manifolds are all designed with NPT threads instead of PT threads or G threads, so the fit is tighter, no air leakage and easy to mount. Each port is well arranged for enough space..
  • Wide Application: It is suitable for the situation when multiple tools need to access an air compressor, so it is widely used for air compressor, cylinder, vacuum engine and other similar system, or used as supporting parts of machine equipment..
Check Stock

Air Manifold, 5 Way 7 Port Air Compressor Manifold, Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Manifold Air Distribution Block, NPT 1\\/2 Inch Supply Port, NPT 1\\/4 Inch Output Port

  • Bring Convenience: When your air compressor need to feed several different systems, this product is what you need. Rather than being forced to constantly change connections, you can instead a single hose with this manifold of multiple ports, a really functional product..
  • Excellent Quality: The air manifold is made of aluminum alloy, which is highly corrosion-resistant, not easy to deform, durable and lighter than other material. The ports are based on standard size for easy mounting..
  • Working Parameters: The working pressure is 0-1MPa, maximum working pressure is 1.2MPa, working temperature is 32 - 140 °F. If you want to know more about the products, please feel free to contact us..
  • Easy to Use: Unlike other manifolds on the market, our air manifolds are all designed with NPT threads instead of PT threads or G threads, so the fit is tighter, no air leakage and easy to mount. Each port is well arranged for enough space..
  • Wide Application: It is suitable for the situation when multiple tools need to access an air compressor, so it is widely used for air compressor, cylinder, vacuum engine and other similar system, or used as supporting parts of machine equipment..
Check Stock