Categories

Best Portable Hydraulic Equipment Kit

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, sh....
Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

TEMCo 3/8\ Female NPT Thread 3/8\ Body Pair Hydraulic Coupler ISO 7241B Poppet Valve Quick Connect for Tractors and Ag Equipment Fits Pioneer Parker Format - HF0078 (HF0076 + HF0077)

  • Oil Be Filled: 500g.Max Lifting Height: 5.31"/ 13.49cm.
  • Used for automotive, truck, farm and heavy equipment repair. Perfect for a variety of autobody repair, frame repair and construction jobs..
  • The load can not exceed the half of the capacity when all tubes used. The extension of the piston can net exceed the stroke.Completed Kit includes most commonly used equipment needed for Pulling Pushing, Lifting, Bending, Straightening & Spreading.
  • The whole hydraulic jack body tool kit is compact and complete for the best working performance. The portable case is included for easy storage. You can carry the tool kit more easily..
  • SHIPPING: US stock, fast shipping. We cooperate with Fedex to make sure you can receive the parcel within 5-10days.
Check Stock

Lenz Replacement Filter Element - 10 Micron Hydraulic Filter Canister - Hydraulic Return Filter, 20 Max GPM, 200 Max PSI, 1”-12 UNF Thread Size - Spin-on Replacement Filter for Hydraulic Systems, 1 lb

  • SPECIFICATIONS: The Lenz 10 micron hydraulic filter replacement canister has a 20 GPM maximum flow rate with 200 PSI maximum working pressure. It has 1”-12 UNF thread size, operates in -22° F to +212° F temperature and weighs 1 lb (0.4 kg)..
  • DUAL APPLICATION: Our replacement for hydraulic fuel systems is versatile. It can be used in the return line of hydraulic systems. It offers a maximum flow rate of 20 GPM for return lines..
  • MADE TO LAST: With an aluminum die cast body and Buna-N seals, this spin-on fuel filter is durable and withstands high temperatures as well as corrosive fluids. This 10-micron filter can be easily used under harsh conditions..
  • DISPOSABLE: The spin-on hydraulic oil filter canister is designed to remove contaminants from petroleum-based, high water, water glycols, and water/oil emulsions fluids. Our hydraulic filter 10 micron is easily replaceable..
  • EASY ASSEMBLY: Our hydraulic return filter kit replacement part offers spin-on assembly and can be easily installed without any special equipment. It is easy to use and portable since it weighs only 1 lb..
Check Stock

E-HEELP Electric Car Jack 5Ton 12V Hydraulic Car Jack Kit with Electric Impact Wrench for SUV MPV Sedan Truck Change Tires Garage Repair

  • [Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks..
  • [Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is..
  • [Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time....
Check Stock

VCT 10 TON Hydraulic Pull Back RAM for Porta Power Tool

  • The hydraulic ram that hooks right up to a 10 ton hydraulic pump, like in a 10 ton portable power. This is perfect for body work on trucks, tractors, and heavy equipment..
  • This unit is made for bending, straightening, and pulling. Use for auto/truck body work, farm, construction equipment, old home and barn restorations and a lot more..
  • 10 Ton Maximum ram capacity, Rugged forged steel swivel hooks, 5" pulling distance..
  • Pulling ram, (pull back jack) used for pulling two pieces towards each other.
  • Overall Length: 26" with a 5" pulling distance.
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

64 Pcs JIC 37° Flare Thread Cap & Plug Assortment Kit Seal Adapter Set for Hydraulic Hose Tube and Pipe SAE AN Fittings Galvanized Carbon Steel with Precision Threading Dash Sizes 4 6 8 10 12 16

  • SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!.
  • PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs..
Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

A/C Seals Set, 270pcs 18 Sizes Car Air Conditioning Compressor Seals Assortment Kit Green O‑Ring for Water Faucet

  • Fit for : A/C Seals Set Widely used in automotive, water faucet, hydraulic and pneumatic, critical sealing, industrial equipment, appliances..
  • Outstanding Performance : Nitrile 70 durometer material with no pollution, abnormall smell, environmentally friendly.The size can be found in the color card attached in the box, greatly save your time..
  • Product Detail : Car Air Conditioning Rubber O-Ring Kit Packing in one plastic box that is good for pick, and extremely convenient to carry around. 18 popular sizes and 270pcs green o‑ring assortment, can be used for different place..
  • Easy to Install : A/C Compressor Seals is easy to use and you can replace the old or broken one directly. Car Air Conditioning Rubber O-Ring Kit Package included the 270 x A/C Seals..
  • Purchase Notice : We value the shopping experiences and satisfaction of each customer, so we provide technical support. If the product install or quality have any problem, please contact us in time.We will solve it as soon as possible..
Check Stock

LainKeen Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4", Exhaust Pipe Expander Stretcher Tool Set, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock