Kinter Lil Piggies Vintage Audio Binding Post Adapter Banana Jacks to Lead Wire Adapters for Speakers and Amplifier Connections 8 Pack - 4 Red and 4 Black
- Each binding post has 3" pig tail for flexibility.
- Gold Plated Binding Post Accepts Banana Jacks, Bare Wire, Pin Connectors or Spade Connectors.
- 18 AWG Solid Tinned Leads Ready for Solder if Needed.
- Perfect for Spring Terminals, DIY Audio, Test Bench, Tight Places and More!.
Check Stock
Myard PNP114040 4x4 (Actual 3.5x3.5) Inches Post Base Cover Skirt Flange with Screws for Deck Porch Handrail Railing Support Trim Anchor (Qty 4, Black)
- ▼ Please read full description before order. ▼ Perfect for deck supports, porch railing, hand rails and post holders. Also, can be used as table leg / mailbox post support brackets..
- ▼ Fits a nominal standard 4″x 4″ post (actual 3.5″x 3.5″ dry post on market). ▼ Sanding / trimming may be required depending on post type and little size error.★ POST HEIGHT LIMIT: 60″ (5-feet), NOT for roof support ★.
- ▼ Made from paintable durable Nylon + Glass-Fiber. NO fading, aging, and weakening from sun exposure. UV-resistant..
- ▼ FREE Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board. ▼ Thicker & higher post base bottom for better structural strength on decks..
- ▼ Clean contemporary style. Re-designed for better looking. Fast & easy post installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match looking. (search “PNP 115445” and “PNP111902” ).
Check StockNikou Binding Posts - 20Pcs 5 Color Banana Jack Socket Binding Post Female Socket Jack for 4MM Banana Plug Connectors
- - 100% brand new and high quality binding posts, made of premuim alloy material which can provide good electrical conductivity and insulated with ABS plastic..
- - These binding posts allow the connection of several different types of connections such as banana plugs or pin connectors..
- - Binding Post Connector are also great connectors on loudspeakers and audio amplifiers as well as other electrical equipment..
- - Binding Post Terminal is widly used on electronic test equipment to terminate (attach) a single wire or test lead..
- - Total 5 colors that you can use for color-coding to meet you different demands: red commonly means an active or positive terminal.
- black indicates an inactive or negative terminal, etc..
Check StockCEPL130541-01 - Bryant OEM Replacement Furnace Control Board
- [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can....
- [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize..
- [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto....
- [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean,....
- [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal cleaning brushes,....
Check StockEMB Professional 7500W 2CH Power Amplifier EB7500PRO
- 2 Channels Amplifier with Stereo / Parallel / Bridge-mono mode.
- Input Impedance: 20k Ohms Balance and 10K Ohms Unbalanced.
- Input Connectors: XLR & 1/4" TRS . S/N Ratio >104dB.
- Output Connectors: Neutrik Speakon & Binding Post.
- Max Power: 7500W . RMS (8 Ohms Bridge): 1200W . RMS (4 Ohms): 900Wx2.
Check Stock
CZC AUTO Quick Release Battery Terminals, Clamps Connectors Positive & Negative Battery Quick Disconnect Terminals for Top Post Battery (Red & Blue), 1 Pair
- GENERAL SIZE: positive inner diameter: 0.75'', negative inner diameter: 0.67''. Fits 4-6mm diameter wire. Designed for top post batteries and side post batteries with standard post adapters.
- SOLID BATTERY TERMINAL: made of durable brass and ABS, which is rust and corrosion resistant, for flawless electricity flow and safety use. With bright red and blue color for easy daily check. With nuts and screws to fix cable for a hassle free installation.
- EASY TO INSTALL & USE: put on the terminal and press the cover to connect.
- lift the cover and pull the terminal out to remove it from the battery. Help to connect a variety of devices to the battery fixture. Size: 2.68X1.81X0.95'', ideal for battery installs in tight spaces.
- COLOR-CODED CAPS: CZC AUTO leisure battery terminal connectors come with red "+" and blue "-" covers, also with sign on their surface. Easy to identify the positive and negative covers to prevent the risk of electrical shock. The blue connector is slightly smaller than the red one.
- WIDELY APPLICATION: apply to most conventional terminal batteries with cylindrical dimensions. CZC AUTO quick release car battery connectors are suitable for 12V battery of car, caravan, motorhome, boat, truck, vehicle, RV, ATV and etc.
Check Stock
CRH 2X 38 Black Deck Railing Wrought Iron Handrail Post Kit Top Mount
- CHR Post with Installation Hardware & Tool: 38" Tall with Post Top Cap - 1.75" x 1.75" - Baseplate 3.25" x 3.25" (Each order contains 2 post).
- Hardware & Tools Included! Safety has been made easy. Included are concrete wedge anchors (with masonary drill bit), wood lag screws (with pilot hole drill bit + nut holder bit + bit extender), leveler, ruler, and physical + online installation tutorials..
- Universal Post: The CR Handrail cable post can be used with any other combination of railing. Customers can build a complete stair deck railing system with other CR handrails, pickets, or ballast setups or use for own project..
- Durable Finish: This metal rail is highly durable due to its phosphate pre-treatment and powder coat finish. It's suitable for both indoor and outdoor use on decks, stairs, porches, balconies, and fences. It resists UV damage, temperature fluctuations, light scratches, and rust. Note that it's not stainless steel, but still has a high degree of rust resistance..
- Available for Easy DIY Projects: Use these additional posts as extensions to DIY projects. Fence U channel, Post Covers, Brackets and Connectors are SOLD SEPARATELY..
Check Stock
Cable Matters Double Gang 5.1 Speaker Wall Plate (Home Theater Wall Plate, Banana Plug Wall Plate) in White
- ... Install audio wall plate in a standard double gang outlet or low voltage bracket for your home theater system.
- Low-profile Speaker wire wall plate is 4.5 x 4.5 x 0.2 inches.
- Screw type binding post banana plug wall plate with adjustable thumb screws can be used with banana plugs, spade connectors, or bare 12 to 18 AWG speaker wires.
- 5 speaker wall plate is labeled for the front, rear and center speakers.
- Binding post terminals on speaker wall plate have red and black ring labels on the front and rear of the 5.1 wall plate for easy identification.
- Subwoofer wall plate with a female coupler can connect an RCA subwoofer cable concealed behind the wall.
- Install this speaker faceplate in the ideal location at an existing wall plate location or new outlet location for a 5 1 receiver upgrade.
- Three-piece surround sound wall plate 5.1 includes a faceplate and two inserts for a quick installation.
- Home theater wall plate with gold-plated binding post and RCA connectors provide a reliable connection and distribute authentic audio.
- 5 1 surround sound distribution wall plate connects 5 speakers and 1 sub.
- Conceal cables behind the wall in your media room for a professional looking installation.
- Includes a lifetime warranty for peace of....
Check StockBLUECELL 1 Pair 3-Inch Double Binding Round Gold Plate Push Spring Loaded Jacks Speaker Box Terminal Cup
- Package included 2pcs Speaker Box Double Loaded Jacks Binding Post Terminal Cup.
- Dimension: Exterior diameter: 75mm / ~ 3”.
- Rear connections use quick disconnect connectors. Positive (Red) and negative (Black) indicators to ensure proper wiring..
- Rear side requires Spade Connectors, Mini Spade Connectors or direct soldering of a speaker wire.
- ★NOTE: Details of the product are shown in the figure, Please make sure this size meets your need before purchase..
Check StockGOF Office Partition Single Panel (36w x 48h)
- A single panel does not stand on its own./ To make it freestanding, 1) use safety legs for straight line set up, 2) fix panels to the wall w/ wall mount, 3) connect panels at 90° using different connectors (L-post, T-post, X-post)./ Easy to assemble or change configurations..
- For more than 3 panels in a straight line, add an extra safety leg every 2 panels..
- Use end bars to cover the edge of the ending piece of panels for a clean look..
- All parts are sold separately. Please search [GOF partition “part names”] in the Amazon search box..
- 1 3/4" thickness upholstered panel/ Frame: steel & aluminum/ Fabric: 55% polyester & 45% nylon/ Fill: solid wood, MDF & honeycomb for acoustical effect.
Check Stock
Cable Matters Speaker Wire Wall Plate (Speaker Wall Plate, Banana Plug Wall Plate) for 5 Speaker in White
- BANANA JACK WALL PLATE with two terminals connects 5 speakers.
- Audio wall plate fits an existing standard single gang outlet or low voltage bracket.
- SCREW TYPE Speaker wall plates with adjustable thumb screws can be used with banana plugs, spade connectors, or bare 12 to 18 AWG speaker wire.
- Binding post terminals on speaker wall plate have red and black ring labels on both sides for easy identification.
- SPEAKER WIRE WALL PLATE with female ports on both sides can connect to speaker cable concealed behind the wall.
- Connect a speaker to the ideal location with an available wall plate or by adding a new outlet.
- TWO-PIECE OUTLET with faceplate and insert makes the installation easier.
- Home theater wall plates with gold-plated binding post connectors provide a reliable connection and distribute authentic audio.
- 5 SPEAKER SET an A/V wall plates to connect 5 speakers.
- Install close to your speakers for a professional looking installation.
Check Stock
Myard 4x4 (Actual 3.5x3.5) Inches Aluminum Deck Post Base Cover Flange with Screws for Decking Patio Railing Handrail Fence Anchor (Qty 1, Black)
- ▼ Fits a nominal standard 4"x 4" post (actual 3.5"x 3.5" dry post on market). ▼ Sanding / trimming on wood posts might be required if size error. ★ POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support ★.
- ▼ Perfect for deck posts, porch, baluster / cable railings, hand rails, pergolas, pavilion, cabin. Also, can be used as table leg / mailbox post support brackets. ▼ Reinforced corners ribs. No worries of edge-breaking and bending..
- ▼ Made of premium die-casting aluminum # ADC12 + powder-coated with AAMA-2604 compliant material (Five times the outdoor exposure and twice the humidity exposure as AAMA-2603). UV-resistant, rust-proof and durable..
- ▼ Stainless Steel screws (Hardness class #12.9 + Dacromet black coating) are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board. ▼ Thickened walls & pads on bottom for better structural strength on decks..
- ▼ Clean contemporary style. Re-designed for unique looking. Fast & easy post installation in minutes. ▼ Use with Myard Railing Connectors and Post Caps for match looking. (search "PNP 115445" and "PNP111902").
Check StockQSC GXD4 Class D Power Amplifier with DSP
- High peak output power with up to 1600 watts.
- Class D output stage with a universal power supply for high performance and efficiency.
- Includes high and low-pass filters, 4-band parametric EQ, limiting, and delay.
- Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capability.
- Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections.
Check Stock
