Categories

Best Powder Coated Extrusion

Roly LaserMATIC10 Laser Engraver with 10W Output, Rotary and Air Assist Included, Laser Engraver for Wood, Metal, Fabric and Paper, 406x387mm

  • [Everything you need] Includes rotary (with end support for tapered tumblers) and air assist with 30 L/min flow rate - all the tools you need to tackle a wide variety of jobs, everything built from the ground up to work together!.
  • [Competitive performance] Engrave at up to 300mm/s or 18,000mm/min. Cuts 6mm plywood in one pass at 240mm/min. Blue laser focuses down to 0.08*0.08mm..
  • [Switch between jobs in seconds] 106mm of z-axis travel means you can switch between flat pieces and tumbler within seconds, without the need to mess with extensions or raising the entire machine..
  • [Unleash your creativity] Our blue diode laser engraves and cuts a wide variety of materials, including wood, stainless steel, powder-coated surfaces, paper, leather and acrylic (dark colors)..
  • [Exceptional build quality] Milled from custom aluminum extrusion with linear guide rails on X and Y-axis. The LaserMATIC10 brings a level of quality not previously seen with consumer-grade laser engravers and cutters..
Check Stock

BoatBuckle F14200 Gunwale/Deck Mount Retractable Rod Tie-Down

  • Self-Retracting Polyester Strap Extends A Full 24 Inches.
  • Pvc Extrusion Coated Strap Grips Rods And Resists Hook Penetration.
  • Easy Installation With Mounting Template Included.
Check Stock

Mobile Flex Bottom Board Material - 4 x 14 Feet

  • Mobile Home Belly Bottom board Closure 4 ft x 14 ft.
  • Mobile Flex is a special bottom closure, woven from black high density polyethylene and extrusion coated with a continuous layer of low density polyethylene..
  • Mobile flex is totally impervious to water. Its strength can not be adversely affected by moisture..
  • Mobile Flex is produced from a material that has been tested for durability and weatherability..
Check Stock

Toca 2100RR Bongo Drum, Red

  • 28 inches Two ply wood shell construction.
  • 28 Inches two ply wood shell construction.
  • 6 Inches & 6-¾ Inches heads and tural rawhide heads..
  • Black Powder coated hardware and 28 Inches two ply wood shell construction..
Check Stock

Qualarc NEW-1415-AC Manchester Newspaper Holder, Antique Copper

  • Matches with the Manchester column mount mailbox.
  • Powder coated cast aluminum newspaper box frame with 22 gauge powder coated steel insert.
  • Please note newspaper holder cannot mount in column with Manchester security chute option.
  • Strong 22 gauge powder coated masonry box.
  • Matches with Manchester Mailbox in Antique Copper Color.
Check Stock

Cosco Outdoor Living 88596GBLE Lakewood Ranch Stacking Dining Chairs with Blue cushions, 6 Pack

  • Cosco's Outdoor Lakewood Ranch collection features a sturdy powder coated steel frame wrapped in weather resistant resin wicker.
  • Outdoor chairs has a durable powder coated steel frame wrapped in easy to clean resin wicker.
  • Dimensions are: outdoor dining chairs 22.44" L x 26.38" W x 34.65" H.
  • Outdoor chairs have a durable powder coated steel frame wrapped in easy to clean resin wicker.
  • Weight capacity for outdoor chairs 250 lbs. per chair.
Check Stock

Special Lite Products Company, Inc. SPK-600-CP Mailbox, Full Size, Black

  • 7 1/2" Diameter Base x 62" H Pole Cast Aluminum Pole + plus mailbox mounting arm.
  • Decorative cast aluminum curbside mailbox post with a durable powder coated finish..
  • The adaptable Ashland Mailbox Post offers several options for installation. Each is provided with mounting hardware to attach them to a new concrete pad (surface mount) and a bolt on 18" direct burial post for installation into new concrete..
Check Stock

Creative Products Group BLL-50301-2006-1PK Global Versa PRO Baggage Slam Latch - Versa V

  • Direct replacement for Kencon style latch keyed to CK330 (IBL-605BLK) with plunger mounted behind extrusion.
  • Can be keyed to match any Global Link key code (G301-G391).
  • Comes with (1) lock, (1) mounting plate with plunger to be mounted on the interior of the door, (4) 8-32 x 7/8 inch mounting screws and (1) key.
Check Stock

Mica Powder Pigment “Aoi Hi Blue” (25g) Multipurpose DIY Arts and Crafts Additive | Woodworking, Epoxy, Resin, Paint, Nail Polish, Lip Balm (Aoi Hi Blue, 25G)

  • ...e craft shifts to its original color..
  • COLOR INCLUDED: 5 colors are included in this thermochromic pigment powder pack: Orange to Yellow, Dark Green to Lime, Purple to Pink, Cyan to Greenyellow, and Violet to Blue..
  • RECOMMENDED CONCENCTRATIONS: For solvent/water based ink/paint: 3~30% w/w(25%).
  • for plastics injection/extrusion: 0.2%~1% w/w(0.5%).
  • Please note that the UV light resistance, heat-resistance and aging-resistance performance of thermochromic pigment powder is poor compared with normal paint, so attention should be paid in use..
Check Stock

Mofun Rear Luggage Rack Compatible with 2009-2023 Kawasaki KLX250S KLX300 Enduro Series

  • 【Fitment】: Fit 2009-2023 Kawasaki KLX250S KLX300 ENDURO Series..
  • 【Specifications】: Condition: Aftermarket 100% Brand New.Material: Steel with Powder Coated Gloss Black Finish.Provides weight reduction, functionality and clean line.Add Luggage Bag load capabilities on your bike for a Long Journey..
  • 【High Performance】: Surface Finish: Powder Coated Gloss Black.(Copper+Nickle+Powder Coated Black) ,High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
  • 【Installation】: Easy to Install.Holes are in place to accept Rotopax mount with no drilling required..
  • 【Package Including】: 1x Rear Luggage Rack.Come with installation instruction..
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

ECOTRIC Crash Bars Engine Guards for KAWASAKI KLR650 2008-2018 klr 650 guard

  • The Crash Bars are perfect for your dual sport and adventure motorcycle riding needs.The Engine Crash Guards are made from tough 1" powder-coated steel tubing so they will hold up on all your adventure motorcycle rides. The 3-point mounting system ensures strength while providing crash protection to your engine, vital components, and shrouds..
  • The Crash Bars/Engine Guards are machine specific for a perfect fit and simple installation..
  • Made from tough 1" powder-coated steel tubing and features a 3-point mount system for ultimate strength..
  • Powder coated black finish. Sold in Pairs. Mounting hardware included. 2.2mm wall thickness.
Check Stock

PRESTIGE GLOW IN THE DARK Pigment Powder. Longest Lasting Glow in The Dark Powder. Recommended for All COLORLESS Medium. Ink. Paint. Plastic Resin. Glass. ETC. (16g (16 x 1g), Sample Pack)

  • PACKAGING: Clear Jars w/Clear Lids or White Lids - 3 gram, Screw-on..
  • Like other Zinc Sulfide powders, Our Dark Red, Pink & Juice Red has a strong sulfur odor which subsides when dried in a medium. Application Scopes Screen printing ink, brush/roller/spraying paint indoors, dips plastic coating, injection/extrusion/casting plastic, silicone rubber molding, etc. Using Condition(recommended): With all colorless, transparent medium, such as ink category,paint,plastic resin, silicone rubber,ceramics,glass etc..
  • Guidelines: The more powder or higher the percentage used, the brighter and longer the glow will last. Add Medium to powder, not powder to medium. ... Use a white, or light color as a background for best results. ... If painting a black surface with powders, brilliance will be much less. Use the clearest vehicle possible.Any color in the vehicle will decrease the brightness and length of glow..
  • The thicker (to a point) the layer of Glow Powder will produce longer and brighter luminosity.   Try to prevent moisture in the manufacturing process. A yellowing of resin may indicate moisture.   Do not use vehicle with high acidity.   Do not grind the Glow Powder, it will destroy the crystal structure and therefore decrease luminosity.   Ratio of Glow P....
Check Stock