Categories

Best Power Amplifier 500watt Stereos

Seismic Audio Speakers Epicenter 5004 4 Channel Power Amplifier, 2000 Watts RMS Amplifier

  • Power Amplifier: Our Epicenter Amplifier is a beast! This is a 4 channel amplifier capable of pushing just about anything..
  • Audio Amplifier: This is a high end amplifier that is rack mountable. This power amplifier is easily capable of pushing eight 18" subwoofer cabinets or two pairs of dual 15" speakers..
  • 2000 Watts RMS Amp: This audio amplifier can handle 4 x 500 Watts RMS at 8 Ohms, 4 x 850 Watts RMS at 4 Ohms, 2 x 1600 Watts RMS at 8 Ohm Bridge of power..
  • 4 Channel Amplifier: The front of the Seismic Audio Speakers’ amplifier has channel A, B, C, and D volume controls, power indicator, clip indicator, protection mode indicator, and signal indicator..
  • Size And Weight Details: This 2000 Watts RMS amp fits standard 19” rack cases and weighs 69 lbs..
Check Stock

Rockford Fosgate T500x1br Power 500 Watt Class-BR Mono Amplifier

  • Our ultra-compact (1.6” x 4.3” x 8.3”) Power T500x1br mono amplifier provides the biggest power to size ratio delivering serious wattage to your subwoofers with 500 Watts of POWER.
  • Flexible vehicle integration in a compact amplifier that can produce high output power (RMS Power Output: 300 Watts x 1 @ 4-Ohm or 500 Watts x 1 @ 2-Ohm or 500 Watts x 1 @ 1-Ohm).
  • Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs.
  • High-level auto turn-on, CLEAN circuit input/output clip detection, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make T500x1br an impressive POWER house.
  • Famous Rockford Fosgate build quality insures that the T500x1br will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockville dB12 2000 Watt Peak/500w RMS Mono 2 Ohm Amplifier Car Amp

  • Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp.
  • Features of dB12: Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 2000 Watts x 1 Channel. - 4 Ohm: 1200 Watts x 1 Channel.
Check Stock

MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit

  • Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
  • Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
  • Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check Stock

Kenwood Kac-M8005 5-Channel Power Amplifier

  • KAC-M8005 - Kenwood 5-Channel 1600W Max Conformal Coated Bridgeable Marine Power Amplifier.
  • RMS Power Rating: 4 ohms: 50 watts x 4 chan. + 300 watts x 1 chan. 2 ohms: 75 watts x 4 chan. + 500 watts x 1 chan. Bridged, 4 ohms: 150 watts x 2 chan. + N/A.
Check Stock

Massive Audio E4 - Car Audio 4,000 Watt Nano Edge Series, Monoblock Car Amplifier, Bass Boost, 1 Ohm Stable

  • HIGH PERFORMANCE CAR AUDIO AMPLIFIER | The best competition amplifiers for cars in the market! This 12v car amplifier features: 2000 Watts x 1 RMS @ 1 Ohm / 4000 Watts MAX, Freq: 10Hz - 220Hz, 0~12dB, Built-In OEM Line Converter, High Power in Extremely Small Heat Sink, Bass Boost 0~12dB, and Ground Loop Isolator. Our monoblock amplifier for car provides real punch for your car stereos and car subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding and underpowered car subwoofer amplifier. Your car amplifier package and car subwoofer set aren't complete without our monoblock Massive amplifier. Our car audio subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. DC 5V - 15V Operating Voltage..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS FULL POWER | Hits its full power all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. It works great and provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER | Don't settl....
Check Stock

Rockville RXD-M1 2000 Watt Peak/500w @ 1 Ohm CEA RMS Mono Amplifier+Amp Kit

  • Package Includes: (1) Rockville RXD-M1 2000w Peak/500w RMS Mono 1 Ohm Amplifier Car Audio Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit....
  • Features of RWK41: 1 � 17' High Grade Twisted Pair of 100% Copper RCA Cable. 17' � 4 Gauge Translucent Blue SuperFlex Power Cables..
  • Features of RXD-M1: Rockville RXD-M1 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

pkg Focal SUB P30 12' 250W RMS Single 4-Ohm Subwoofer + SOLID2 Black 2-Channel 200W RMS Amplifier

  • SUB P30: 12" 4-ohm subwoofer | Polypropylene cone with butyl rubber surround | Power range: 100-250 watts RMS | Peak power handling: 500 watts.
  • Frequency response: 35-500 Hz | Sensitivity: 90.8 dB | Top-mount depth: 5-3/4" | Sealed box volume: 0.88-1.59 cubic feet | Ported box volume: 1.24-2.82 cubic feet.
  • SOLID-2 BLACK: 2-channel car amplifier | 75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms) | 200 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) | CEA-2006 compliant.
  • Variable high- and low-pass filters (50-150 Hz, 12 dB/octave) | Class-A/B amplifier design | Frequency response: 10-60,000 Hz | Preamp- and speaker-level inputs.
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier | Fuse rating: 25A x 1 | Dimensions: 8-11/16"W x 2"H x 7-7/8"D.
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...eveloped from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (90....
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...eveloped from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (90....
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

(4) Rockville 6.5\ LED Swivel Metal Marine Wakeboard Speakers+Amplifier+Amp Kit

  • Package Includes: (2) Pair of RockvilIe WB65LED 6.5" 600w Metal Marine Wakeboard LED Tower Speakers+Remote. (1) RockvilIe RXM-F3 1600 Watt Marine/Boat 4 Channel Amplifier Amp+PA Microphone. (1)RockvilIe RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (1)RockvilIe MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin. Pair 6.5" marine wakeboard tower speakers with built in LED's. Waterproof leading wire. Mounting brackets and mounting hardware.
  • ABS chrome grill. Installation hardware. Wiring instructions. Features: Pair RockvilIe WB65KLED 6.5" Polished Silver Wakeboard Tower Speaker w/ Built in LED's. Peak Power Handling per speaker: 300 Watts. RMS Power Handling per speaker: 150 Watts. Frequency Response: 500Hz - 20kHz. Sound Pressure Level: 90dB. Impedance: 4 Ohm. Polished silver stainless steel enclosure. Aluminum Mounting Bracket. Quick and Easy Speaker Angle Adjustment. Bracket rotates 360 degrees. 1" Titanium Dome Tweeter.
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Resistant to Water, Rust, andSun light ProtectedRays. Polypropylene Mica Injected Cone with Rubber Surround. 15 oz High Density Magnet. 1" Voice Coil. CE and RoHS Certified. These wakeboard speakers fit bars ranging from 1" to 2.5....
Check Stock