Categories

Best Power Capacitor Car Audio

OzCharge RescueMate 12-Volt Super Capacitor Jump Starter – 1000 Amp

  • ✔️ Exceptional Engine Cranking Power – The ultracapacitor designed to assist car battery. Booster deliver EXTRA 450 Amp engine starting power. 15 Volts / 90 Farads Pack, for all 12 volts gasoline or diesel engine vehicles..
  • ✔️ Works In Extreme Weather Conditions – Performs down to –40°F and up to +158°F (–40°C to +70°C). A+ MAX super capacitor battery jump starter operates in freezing winter or in burning summer, no need to worry your car batteries do not have the power needed to start the engine..
  • Car Audio / multi-subwoofers Stereo System Voltage Stabilizer, Peak Current Booster.
  • ✔️ Easy Spark Free Installation – Safety switch design, keeping you from risks of spark or explosion..
  • Stabilize peak amperage draws and protection from power surges.
Check Stock

BOSS Audio CAP8 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor and QPower 0 Gauge 3000 Watt Car Amplifier Wiring Installation Kit

  • POWER CAPACITOR: 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor.
  • High-Level Input Surge Voltage: 20 Volts.
  • AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload.
  • DIGITAL DISPLAY: Blue LED digital illuminated display window.
  • SPECIFICATIONS: Equivalent Series Resistance (ESR): 0.0015 Ohms @ 120 Hz @ 25 Degrees C.
  • Capacitance: 8 Farad, 8000000 Microfarad.
  • WIRING KIT: Deluxe High Quality Fuse Holder.
Check Stock

Fielect Axial Lead Type Polypropylene Film Capacitor Cylindrical 250V DC 2.7uF 15.5 * 31mm Yellow for Audio Divider 1pcs

  • 【Parameters】- Material: Polypropylene Film.
  • 【Feature】- The specifications of the capacitors is marked on its surface. High temperature resistance of polyester material is 185 Fahrenheit degrees..
  • 【Easy to Use】- Polypropylene capacitor is lightweight with simple structure, easy to use..
  • 【Application】- The film capacitor is suitable for audio amplifiers, dividers, fan lights, household appliances, car speakers, power supplies, beauty equipment, industrial equipment and more..
  • 【Package Contents】- 1 Pcs x Film Capacitor..
Check Stock

DS18 EN2T High Density Abs Universal A Pillar Pod 2 X 1 Tweeters (No Tweeters)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

12V Amplifier Board, DROK 15W+15W 2.0 Dual Channel Audio Amplifier Board PAM8620 DC 8-26V 24V Digital Stereo Amp Module Class D Mini Power Amplify Circuit for Sound System Speaker DIY

  • 【Parameters】- Material: Polypropylene Film.
  • 【Feature】- The specifications of the capacitors is marked on its surface. High temperature resistance of polyester material is 185 Fahrenheit degrees..
  • 【Easy to Use】- Polypropylene capacitor is lightweight with simple structure, easy to use..
  • 【Application】- The film capacitor is suitable for audio amplifiers, dividers, fan lights, household appliances, car speakers, power supplies, beauty equipment, industrial equipment and more..
  • 【Package Contents】- 1 Pcs x Film Capacitor..
Check Stock

1 Pc of 5.0 Farad Capacitor Car Audio 5000W Power 12V Digital 3 Digit Display + 0 GA KIT

  • 5.0 Farad Capacitor Car Audio 5000W Power 12V Digital 3 Digit Display + 0 GA KIT.
Check Stock

Massive Audio CT4X - 1 Inch/25.5mm, 120 Watts Max, 30 Watts RMS, Neodymium Tweeter – 57mm Power Bullet Tweeter Speaker for Cars, Heavy Duty Black Anodized Titanium (Sold as Each)

  • ... hear these power tweeters scream over your bass!.
  • HIGH QUALITY, LONG LASTING CONSTRUCTION | This Power Tweeter is built to last! Unlike other brands that only last a few months, this power tweeter will not distort over time. With 57mm CCAW Field Replaceable Voice Coils, 1" Throat Size, 6dB Hi-Pass Filter 2.2uF/250V Capacitor, and CNC Aluminum Phase Plug To Reduce Heat, this easy to mount tweeter will last longer than your car stereo!.
  • EXCEEDS YOUR EXPECTATIONS | This bullet tweeter speaker is a great replacement tweeter for your factory tweeter, pioneer tweeter, rockford fosgate tweeter, kicker tweeters and many more! Install and easily mount as a jeep wrangler tweeter, jeep grand cherokee tweeter, honda accord tweeter, honda civic tweeter, chevy silverado tweeter, ford f150 tweeter, subaru forester tweeter, component tweeter, and even as home tweeters!.
  • MASSIVE AUDIO QUALITY GUARANTEED | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers. Compare us to other brands like Bose, Boss, Rockford Fosgate, Alpine, JBL, and hear the MASSIVE difference!.
Check Stock

3 Car Audio Speaker Tweeter - 1000 Watt High Power 3 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2k - 25 kHz Frequency, 109 dB, 4-8 Ohm, Heavy Duty 100 oz Magnet - Pyramid TW57

  • 1000 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 1000 watt peak power / 500 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 109 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of todays cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 3-inch super titanium car audio speaker tweeter w/ high temperature voice coil, die cast aluminum frame, and has a 5" diameter / 2 mounting depth.
  • STRONG STRUCTURE: This complete tweeter has a 100 oz magnet structure and comes with a crossover capacitor. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock

1.5\ Car Audio Speaker Tweeter - 400 Watt High Power 1.5 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2 kHz-25 kHz Frequency, 105 dB, 4-8 Ohm, Heavy Duty 60 oz Magnet - Pyramid TW46

  • 400 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 400 watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4/8 OHM IMPEDANCE: This car tweeter has 105 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 1.5 inch super titanium car audio speaker tweeter with die cast aluminum frame and has a 4" diameter / 2.5" mounting depth.
  • STRONG STUCTURE: This complete tweeter has a 60 oz magnet structure and comes with a capacitor crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock

1” Car Audio Speaker Tweeter - 300 Watt High Power Super Titanium Tweeter System w/ 3.75 Inch Aluminum Bullet Horn, 2kHz-25 kHz Frequency, 98 dB, 4-8 Ohm, Heavy Duty 20 oz Magnet - Pyle PDBT19 (Pair)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

Timpano TPT-ST2 Black 3.75 Inch Super Tweeter, 4 Ohm, 500 Watts Peak, 105 dB Bullet, 1 in Voice Coil, Slim Profile Tweeters for Pro Car Audio (Pair)

  • CRYSTAL CLEAR HIGHS: These pair of tweeters for car audio are capable of generating extremely loud volume you need to keep up in the high SPL environment.
  • DESIGNED FOR EFFICIENCY: The aluminum diaphragm has been engineered to take the power needed to keep up and maintain crystal clarity for your highs and mids.
  • BUILT IN CROSSOVER: A capacitor that eliminates out all low end frequencies that might otherwise harm the super tweeters for car audio.
  • SHALLOW PROFILE: You will receive a box with 2 tweeters speakers, a high performance pair with a compact design only 1.38 inches of mounting depth easy to mount on your car door speakers or anywhere!.
  • QUALITY YOU CAN TRUST: Engineered and designed in the USA, the ST2 are high compression bullet tweeters that are rated at 250 watts max peak power each. Ready to delivery major concert sound to your sound system..
Check Stock

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

  • ...t ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.
Check Stock

Fielect 80Pcs Aluminum Radial Electrolytic Capacitor 10uF 63V Low ESR Green 5x11mm High Ripple Current,Low Impedance for TV, LCD Monitor, Radio, Stereo, Game

  • 【Dimension】 -Capacitor capacity:10uF.
  • 【Material】 -Electrolytic capacitors are made of high-quality standard materials, with high insulation strength, fast switching speed, high power consumption and good current performance.
  • 【Features】- The capacitor has excellent moisture resistance, small size, wide capacitance and reliable performance.
  • 【Advantage】-Each electrolytic capacitor has an identification code and a marked capacitance value, which is easy to distinguish and use.
  • 【Application】 -This series is suitable for power supply, communication equipment, switching power supply, audio amplifier interconnection level, industrial measurement.
Check Stock