Categories

Best Power Distribution Blocks

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Nesco FD-80 700 Watt Square Food Dehydrator

  • EVEN HEAT DISTRIBUTION: 600 watts of drying power provides even heat distribution.
  • consistent drying that is four times faster than other food....
  • ADJUSTABLE TEMPERATURE CONTROL: The adjustable digital temperature control (90°F -160°F) gives you the flexibility to achieve the best results when....
  • EXPANDABLE TO 12 TRAYS: Comes with four (13 1/2″ diameter) trays and expands up to 12 trays so you can dry large quantities at once with no tray....
  • VITASAVE EXTERIOR: The opaque exterior blocks harmful light to retain more of the food's nutrients and vitamins during the drying process.
  • ACCESSORIES INCLUDED: (2) Fruit Roll Sheets, (2) Clean-A-Screens, a sample of Jerky Seasoning & Cure, and a 52-page recipe & instruction book.
Check Stock

LBY .24\x 1.97\x 9.8\ Wall Mounted Copper Ground Bar Kit, with 12 Terminal Positions,Copper Grounding Busbar Bar Kit

  • Brass terminal grounding strip bus bar blocks with 4 screws..
  • Mounting Hole Center Distance:57mm/2.24"..
  • Total Size:70 x 12 x 21mm/2.76" x 0.47" x 0.83"(L*W*H)..
  • Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc..
Check Stock

Sumitomo Ice Edge Performance-Winter Radial Tire-225/55R17 97T

  • Triangular center blocks enhance stability and handling.
  • Optimized stud pin distribution enhances performance when studded.
  • Specially formulated rubber for winter performance.
  • Triangular Center tread blocks expands tread contact footprint with road surface for superior stability and handling.
  • Optimized Stud Pin distribution for the maximum performance capability when studded for winter use.
Check Stock

DS18 DB1020 Distribution Ground Block - 1 x 0GA in/ 2 x 0GA Out, Nickle Plated Internal Materials, High-Strength Heat Resistant Plastic Housing, Oversized Screws for Secure Connections (1 in 2 Out)

  • 1 x 0GA IN/ 2 x 0GA OUT - Make wiring your system easier with high quality distribution blocks from DS18..
  • NICKLE PLATED INTERNAL MATERIALS - Eliminates the possibility of corrosion, rust, oxidation, or premature wear on speaker wire connection points. Ensures you get the longevity out of your system that you expect..
  • HIGH CONDUCTIVITY COPPER ALLOY - All of DS18's distribution blocks are made with high conductivity copper alloy and chrome plated to maximize the security of your connections. Ensure your wiring is secure, neat, and safe..
  • OVERSIZED SET SCREWS - Allen head tops and oversized set screws with small serrated ends guarantee a strong consistent connection that instils confince against loose wires..
  • DEEP WIRE RECESSES - DS18 has designed these distribution blocks with deep recesses to protect your wiring from being left exposed to the elements or other objects that might cause your system to malfuction..
Check Stock

Idong 3-Way Mini ANL Fuse Holder 60 Amp Distribution Block, Copper 0/2/4 Gauge to 4/6/8 Gauge Used for Audio Stereo Amplifier of car, Truck, Ship, with Hexagon Wrench (3 Way)

  • ★Compact 3-way power supply fuse distribution block, with 60Amp ANL fuse, with high reliability and practicality. And it is equipped with 2 hexagonal wrenches of corresponding size, so you don't have to worry about not having a wrench anymore..
  • ★Material: Idong distribution blocks are made of high-conductivity copper alloy, with strong conductivity, high temperature and voltage resistance, good manufacturability, and beautiful appearance..
  • ★ Attack effect: When the circuit current exceeds the rated current of the product, the fuse will blow and automatically disconnect, providing comprehensive protection for your car audio system..
  • ★Wire specifications: 0/2/4 Gauge AWG input, 4/6/8 Gauge AWG output, 60A fuse distribution block has stable performance and long service life..
  • ★Application: It is widely used in automobiles, motorcycles, trucks and other vehicles, ships or other vehicles to protect your audio system..
Check Stock

Nesco FD-79 Snackmaster Pro Digital Food Dehydrator for Snacks, Fruit, Beef Jerky, Meat, Vegetables & Herbs, Gray, 4 Trays

  • EVEN HEAT DISTRIBUTION: 600 watts of drying power provides even heat distribution.
  • consistent drying that is four times faster than other food dehydrators.
  • ADJUSTABLE TEMPERATURE CONTROL: The adjustable digital temperature control (90°F -160°F) gives you the flexibility to achieve the best results when drying different foods that need varying temperature settings.
  • EXPANDABLE TO 12 TRAYS: Comes with four (13 1/2″ diameter) trays and expands up to 12 trays so you can dry large quantities at once with no tray rotation needed.
  • VITASAVE EXTERIOR: The opaque exterior blocks harmful light to retain more of the food's nutrients and vitamins during the drying process.
  • ACCESSORIES INCLUDED: (2) Fruit Roll Sheets, (2) Clean-A-Screens, a sample of Jerky Seasoning & Cure, and a 52-page recipe & instruction book.
  • MADE IN THE USA: Proudly made in the USA of global and domestic components. Only the powerhead of this item is imported from China. The rest of the product is 100% made and assembled in the USA.
Check Stock

4\ Ground/Power Distribution Terminal Block Battery Bus Bar Set [Max. 300V AC/48V DC] Negative/Positive Insulated Busbar for Auto Marine Car Trailer RV Boat - Black + Red

  • START WITH THE BEST - Every successful project starts with a solid foundation. These sturdy junction blocks feature a robust, tin-plated brass busbar, a flame-resistant base, and durable stainless steel hardware..
  • TRULY UNIVERSAL - Whether your working on a boat, a car or an RV, we've got you covered. Built to handle up to 300V AC, 48V DC, and 150A at 32V DC (4,800W), these power distribution blocks are ideally suited for all of your power needs..
  • YOU'RE COVERED - What's the first thing that always breaks on a busbar? The cover. They're usually thin, rigid, and brittle. Not these covers. Our covers are flexible, flame-resistant, and aren't held on by tiny, breakable clips or easy to lose nuts..
  • WORKS WITH YOU, NOT AGAINST YOU -  Extra tall cover cutouts give you maximum flexibility with minimal effort. Use whatever gauge wire you need, route your wires from either side, double-stack wires if necessary, the covers will still fit..
  • SIMPLE - Sometimes "more options" just means more difficult. Our 6 terminal, 4-3/4? busbar gives you everything you need without overcrowding your system, or your patience..
Check Stock

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn....
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel,....
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB..
Check Stock

Jamgoer 300A Bus Bar Heavy Duty Module Design Power Distribution Block 12V 24V 48V DC Busbar Box with 4X M8(5/16') Terminal Studs for Battery Marine Automotive RV Car Truck (Red)

  • →[Dimensions}: The bus bar is measured (L x W x H): 138 x 69 x 44.5mm (5.433"x2.72"x1.75"). Stud size: M8 (5/16")..
  • →[High Quality]: Bus Material: The battery distribution block is made of brass and nickel plated, which has good electric conduct performance and sturdy rust-resistant. The base is made of nylon - glass fiber reinforced to protect your safety, ensures great mechanical strength and durability..
  • →[Waterproof & Dustproof]: The power distribution block With four removable side plates, a insulated rear cover, that's designed to withstand rain and dust,resist the air and seawater erosion..
  • →[Unique Design]: The battery terminals base has non-slip sponge, increased Stability. And the blank write-on space on the top allows easy labeling for each branch..
  • →[Easy to Mount]: RV terminal blocks surface screw fixed installation, four mounting holes make this terminal block easier to be mounted in any orientation.Removable windows for unobstructed wiring..
Check Stock

Power Distribution Block, Auto Car Audio Amplifier 1 in 4 Ways 0/2/4 Gauge in 4/8/10 Gauge Out Fuse Holder Circuit Protector Distribution Connecting Blocks

  • Distribution Block Input: 2GA*1, Outputs: 4GA*2 Wire.
  • Car audio distribution block, Impact Resistant Snap-on Plastic Cover, made Of High Strength, Nonperishable Industrial-grade Plastic.
  • High performance amp power distribution block,Low-resistance, high-current ability.
  • Amplifier Distribution block, suitable for auto car, boat or other vehicles, protect your vehicle's audio's system.
  • Power distribution block, run up to three 4-Gauge or 8-Gauge wires to your amplifiers. Power Distribution Block, can also be used to combine the ground wires of multiple amplifiers to a single grounding point.
Check Stock

Apeixoto 3 Way Mini ANL Fuse Holder 60 Amp Fuse Distribution Block with Copper 0/2/4 Gauge to 4/6/8 Gauge for Auto Boat Audio Amplifier

  • Package: There is a compact 3 way power fuse distributor block with 60Amp ANL fuse. There are also three corresponding size hexagon wrenches to help you solve the installation issue..
  • Construction: The Apeixoto 3 way distribution blocks are constructed with copper alloy which has a good conductivity and heat resistant. The outside box is a high quality plastic which will protect the fuse no damage..
  • Specifications: The 3 way power fuse distributor block has a 60Amp ANL fuse, and it’s 0/2/4 gauge AWG input and 4/6/8 gague AWG output..
  • Installation: Easy wiring connection and can be used directly, No other modification needed. The enclosed wrenches will help to make the installation much easier..
  • Warranty: We offer 30 days free return and 365 days free replacement. Kindly let us know if you need any assists or help during usage..
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

  • ...nvenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickly using those bridges. End Stopper Clamps are fastened using screws or simply snapped onto the DIN rail. End Cover Usage: Connection by screw tighten.
Check Stock