Categories

Best Power Distribution Board

Electronics-Salon Panel Mount 10 Position Power Distribution Fuse Module Board, for AC/DC 5~32V

  • Panel Mount Power Distribution Fuse Module Board..
  • Work voltage: AC or DC 5~32V, total current rating 40Amp. Dimensions: 150mm x 72.5mm x 29mm (W x L x H)..
Check Stock

K2 Alchemist Wide Mens Snowboard 159cm (W)

  • ...r warranty, the S1 Core is made from three renewable species of timber - Bamboo, Aspen, and Paulownia. Aspen and Bamboo work together to highlight the snap and response of this wood and a Bamboo-dominant underfoot section at 30° to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. We’ve also placed lightweight paulownia in the tip and tail to help to reduce swing weight..
  • Spectral Braid - An integrated carbon weave that runs the entire length of the board, intersecting at 90º angles in the tip and tail for adding torsional rigidity and responsiveness and a more relaxed angle between the inserts for handling and maneuverability..
  • SpaceGlass Tip - A pre-cured fiberglass insert placed in the board's tip to reduce swing weight and add durability and maneuverability..
  • Recess3D - By reducing the number of materials in low-stress zones, we’re able to minimize the swing weight of your snowboard while also reducing chatter in the tip and tail - all without sacrificing strength..
  • Carbon Power Fork - A pre-cambered carbon inlay in the tail of your snowboard gives the board energy in and out of turns and adds extra pop for takeoffs and landings..
Check Stock

Power Distribution Block, Auto Car Audio Amplifier 1 in 4 Ways 0/2/4 Gauge in 4/8/10 Gauge Out Fuse Holder Circuit Protector Distribution Connecting Blocks

  • Distribution Block Input: 2GA*1, Outputs: 4GA*2 Wire.
  • Car audio distribution block, Impact Resistant Snap-on Plastic Cover, made Of High Strength, Nonperishable Industrial-grade Plastic.
  • High performance amp power distribution block,Low-resistance, high-current ability.
  • Amplifier Distribution block, suitable for auto car, boat or other vehicles, protect your vehicle's audio's system.
  • Power distribution block, run up to three 4-Gauge or 8-Gauge wires to your amplifiers. Power Distribution Block, can also be used to combine the ground wires of multiple amplifiers to a single grounding point.
Check Stock

K2 Excavator Mens Snowboard 154cm

  • S1 Core - Lightweight, snappy, and durable, our A1 Core is made from three renewable species of timber - Bamboo, Aspen, and Paulownia. Aspen-dominant to highlight the snap and response of this wood, we’ve combined it with Bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge..
  • ICG 10 Biax Carbon Glass - Integrating Carbon Fiber stringers that run the length of the board into our fiberglass increases the snap of the snowboard without adding unnecessary rigidity..
  • SnoPhobic Top Sheet - This top sheet material sheds unwanted snow build-up, keeping your snowboard light and nimble..
  • Carbon Power Fork - A pre-cambered carbon inlay in the tail of your snowboard gives the board energy in and out of turns and adds extra pop for takeoffs and landings..
  • Hybritech Sidewall Construction - A K2 exclusive. By transitioning from a P-Tex sidewall into a capped construction in the tip and tail of our snowboards, we can reduce waste while giving our snowboards better energy transfer and making them more durable than our competitors..
Check Stock

UNIROI Raspberry Pi RAB Holder Breadboard Kit with 830 Points solderless Circuit Board Raspberry Pi Holder for Arduino, Mega 2560 & Raspberry Pi 4B, 3B+, 3B, 2B and 1B+, A+ (52 Items)

  • This 14 in 1 RAB Holder kit is designed by for the Raspberry Pi and Arduino hobbyists, the holder is large enough for a Raspberry Pi 4B/ 3B/ 2B/ 1B+/ Zero/ Zero W, Arduino 328P Control Board or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard.
  • Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ and zero/ zero W..
  • This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails..
  • Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs (three for each color), ten 1k resistors, a screwdriver, and some screws..
  • Gift: GPIO 40 pin Table Card for wiring Pi and BCM codes for all RPI motherboard..
Check Stock

Tripp Lite Basic PDU, 30A, 20 Outlets (16 C13 & 4 C19), 200/208/240V, L6-30P Input, 15' Cord, 1U Rack-Mount Power, 5 Year Warranty (PDU1230)

  • Single phase PDU: safe, reliable power distribution unit delivers 200/208/240V single-phase AC power to multiple loads from a utility outlet, generator or UPS system in a high-density it environment. Ideal no-frills basic PDU for networking, telecom, security, PDU networking, and audio/video applications.
  • 20 outlet power distribution: The PDU features 20 total outlets rear C13, four front C13 and four front C19. The NEMA L6-30P input Plug with long 15-foot (4.5 M) cord connects to your facility’s compatible AC power source, generator or protected ups to distribute power to connected equipment. Pdu offers 208/240 volts AC, 30a maximum input current.
  • Switchless design: the switchless design prevents an accidental shutdown, which could lead to costly downtime. Built-in circuit breakers protect connected equipment from dangerous overloads.
  • 1U metal Housing: reversible all-metal housing faces front or rear in rack. Power distribution unit mounts horizontally in 1U of EIA-standard 19 in. 2- and 4-post racks, as well as on a wall or workbench or under a counter. Also known as - PDU power strip, power distribution unit rack mount, basic rack PDU, PDU 30a, rack mount PDU and power distribution unit 19 rack mount.
  • 5 year warranty & FREE tech support: Tripp Lite ....
Check Stock

WANGKUN GT-U7 GPS Module Navigation Satellite Positioning Compatible GY-NEO6MV2 NEO-6M 51 Single chip microcomputer STM32 for Arduino

  • 1. size 27.6x26.6 can be straight in or choose patch (with positioning hole).
  • 2. working voltage: 3.6V-5V (or direct USB power supply).
  • 3. work baud rate: 9600 (self modification).
  • 4., with IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
Check Stock

4 Post Power Distribution Block Bus Bar Pair with Cover - Made in The USA - 250 Amp Rating – Marine Bus Bar Automotive and Solar Wiring – Battery Terminal Distribution Block - Set of 2 3/8”

  • Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power..
  • Includes Both Red and Black Connectors - With these 2 packs of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 3/8" holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy..
  • Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability. Wire up to 4 accessories. Each bus bar terminal block includes a cover to protect connections from damage and corrosion..
  • Keep Your Wires Neatly Organized- With these power distribution blocks you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood anymore. Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination you can think of..
Check Stock

Hitec RCD 44254 X4 AC Pro AC/DC Four Port Multicharger

  • Total charge circuit power on AC power: 200 watts with power distribution.
  • Ac power distribution, channels A & C: 100 watts total, channels B & C: 100 watts total.
  • Charge Current: channels A & B: 0.1 - 10.0 Amps, channels C & D: 0.1 - 5.0 Amps.
Check Stock

2 Pair No Wires XT30 to XT60 Plug Female Male Adapter Wireless Connector for RC FPV Drone Car Lipo NiMH Battery Charger ESC

  • Used for convert battery with XT30 to XT60 on electronic speed control,power distribution board on FPV drones and for Charger.
  • 2PCS XT60 male plug to XT30 female plug adapter..
  • Solid and secure connection,light weighted ,reduce the weight for rc toys..
  • No wires design can save more space,portable and easy to use.Save time soldering by using these connectors..
Check Stock

UHF 5 Way Active Antenna Power Distribution System for shure Sennheiser Wireless Microphone Compatible Shure Antenna Paddle

  • UHF 450-970MHZ Antenna splitter for Wireless Microphone System and shure Antenna Paddle.
  • The product is a UHF antenna distribution system that can expand the signals of the wireless microphone system by splitting one pair of the antennas to wireless receiver.It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs.And can supply the power port to the UHF wireless system..
  • Antenna distribution system is used for large UHF wireless system,four wireless receivers can use two same antennas for every unit.Cascade port can receive the 5th receiver or the 2nd antenna distribution system..
  • Antenna Distribution System Compatible with Sennheiser Shure AKG UHF Wireless Microphone,Your wireless microphone frequency range must be between 450-970MHz.
  • Two 50ΩBNC antenna cascade port can extra connect one antenna distribution system or the fifth wireless receiver.The large wireless system can work by 1 pair antenna..
  • Note: This antenna splitter need to be used with antenna paddle,antenna amplifier using Method，You can see the connection picture below, If you don't have antenna paddle, you can buy it in this store.
Check Stock

Retrospec Ruck Sack iSup Inflatable Standup Paddle Board Bag

  • Impressively durable nylon shell prevents damage to your board and accessories.
  • Mesh netting on top and sides for better ventilation to dry board.
  • Fits Retrospec's WEEKENDER, WEEKENDER-TOURING, and WEEKENDER-NANO inflatable standup paddle boards.
  • Adjustable sides and shoulder straps for easy transporting and storing, torso strap for better distribution of weight.
Check Stock

Retrospec Ruck Sack iSup Inflatable Standup Paddle Board Bag

  • Impressively durable nylon shell prevents damage to your board and accessories.
  • Mesh netting on top and sides for better ventilation to dry board.
  • Fits Retrospec's WEEKENDER, WEEKENDER-TOURING, and WEEKENDER-NANO inflatable standup paddle boards.
  • Adjustable sides and shoulder straps for easy transporting and storing, torso strap for better distribution of weight.
Check Stock