Best Power Drain Cleaner Harbor Freight

Air-activated Foot Pedal - Fits Hydrostar Drain Monster Drain Cleaners

  • Made In USA duplicate of Hydrostar Drain Monster Air Pedal.
  • One Piece Molded Rugged Heavy Duty Design.
  • Snug Hose Fit - No Compression Nut needed.
  • Fits all Harbor Freight Drum Drain Cleaners.
Check Stock

Air Switch Assembly - fits All Harbor Freight Hydrostar Drain Monster Drain Cleaning Machines.

  • Air Switch Assembly fits All Harbor Freight Hydrostar Drain Monster Drain Cleaning Machines..
  • Two Pole Air Switch - 21A 125/250 VAC, includes nut and hose compression fitting..
Check Stock

SWAG Off Road Electric Drive/Bottle Jack Kit For The Harbor Freight Tubing Roller

  • Converts your manual Harbor Freight Tubing Roller into an electrically powered roller with hydraulic downward pressure..
  • All material is laser cut out of 1/4" steel, springs, bottle jack clamp and detailed color instructions are provided..
  • This kit uses the Harbor freight electric pipe threader and the Harbor Freight 4 ton bottle jack..
Check Stock

Air Foot Pedal and Air Switch Combo Set - Fits All Harbor Freight Hydrostar Drain Monster Drain Cleaning Machines.

  • Fits All Hydrostar Drain Monster and Harbor Freight Drain Cleaners.
  • No Clamps At Either End Of Hose That Leak.
Check Stock

Air-activated Foot Pedal for Drain Cleaning Machines Fits Harbor Freight Hydrostar Drain Monster Drain Cleaners.

  • Air Foot Pedal - Fits All Harbor Freight, Hydrostar Drain Monster Drain Cleaners..
  • 8' long durable and flexible hose. Hose 1/4" O.D. 1/8" I.D..
  • Heavy-duty neck on bulb - molded one-piece construction..
  • Riveted aluminum plate on the bottom of the foot pedal..
  • Fits Hydrostar Model Numbers: 68284, 68285, 61856, 61857..
Check Stock

Air Foot Pedal with 8' long Neoprene Hose for Drain Cleaning Machines/Air Bulb & Hose Assembly.

  • Fits Ridgid, General, Spartan, Electric Eel and other drain cleaning machines that use air as an actuator..
  • 3/8" x 8' long semi-flexible neoprene air hose..
  • Heavy duty neck on the bulb with a fitted barbed hose fitting insert..
  • Riveted aluminum plate on the bottom of the foot pedal..
  • Not compatible with the Harbor Freight Hydrostar Drain Cleaners..
Check Stock

WEN Lavender Styling Creme 6oz

  • For Harbor Chicago Electric Predator 79CC 99CC 69733 68124 Engine.
  • For Buffalo Tools Sportsman 1500 2000 Watt 2.8HP Gas Generator B.
  • For Harbor Freight Predator 1 in. 79CC 63404 Gasoline Water Pump.
  • For Harbor Freight Pacific HydroStar 1IN 1" Water Pump 79CC 69747.
  • For Bluemax 3435 2.4HP 2200PSI 1.6GPM Pressure Washer.
Check Stock

Hydrostar Drain Monster Air Foot Pedal Fits 68284 68285 61856 61857 & All Harbor Freight Drain Cleaners

  • Hydrostar Air Pedal Fits 68284, 68285, 61856 & 61857 Harbor Freight Drain Cleaners.
Check Stock

TOPEMAI 212CC Carburetor Carb for Harbor Freight Predator 60363 68121 68120 69730 69727 Engine R210 Gas Engine

  • Carburetor fit for Harbor Freight Branded 212CC Chicago Electric Predator Gasoline Engine..
  • 212cc Carburetor fits for Harbor Freight Predator 6.5hp Go Kart OHV Engine.212CC Carburetor fit Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)..
  • 212cc Carburetor Compatible with Honda 16100-ZL0-W51/16100-ZH8-W61, Compatible with Stens 520-718..
  • 212CC Predator Carburetor comes with 3pc gaskets and 1pc insulator,easy to use and good value for money. Size: Center mounting hole: 42mm, core hole: 19mm, choke hole: 24mm..
  • Feel free to contact us by emails if you have any problems..
Check Stock

YUSTDA AC Power Cord Charging Cable for Schumacher DSR PSJ-2212 PSJ-3612 PSJ-1812 PSJ-4424 Jump Starter IP-70NC PowerStation PSX2 PSX3 PSX1004 CEN-TECH 38391 60666 62453 6237 EverStart MAXX 1200

  • Stanley 300 AMP Instant Starting Power Jump-Start System 600 Peak Battery Amps.
  • Duracell Powerpack Pro 600 DR600PWR Pro600 600 Watt Power pack Pro1300 1300 Peak Amps Jump Starter and Emergency Power Source Rechargeable Battery 12V.
  • Chicago Electric Model 38391 12 Volt Jump Starter Harbor Freight Tools.
  • Chicago Electric Power Tools 3 in 1 Air Compressor Item # 39954 Jump Starter.
  • Black & Decker PPRH5B SEL Professional Power Station BD Compressor.
  • ATD ON THE GO ATD-5922 ATD-5926 ATD-5925 12V 1700 Peak Amp.
  • Matco Tools Proseries DSR PS2200JS Heavy Duty Pro Series 12V Portable Power 22AH Battery Charger.
  • Jump N Carry JNC 4000 JNC4000 KKC-4000 1100 Peak Amp 12 Volt Battery Booster Box Jumper Pack 12V.
  • Jump-N-Carry 12 Volt 1700 Peak Amps JNC350 JNC660 JNCAIR JNC770 JNC770B JNC770R JNCXF JNC 350 JNC 660 JNC AIR JNC 770 KKC-660 SOLJNC660-BF 12V.
  • Forney 52731 52732 12V 12-Volt Power Source Jump Start Battery Booster Pack.
  • EverStart MAXX 1200 PEAK AMPS 1200A 750A 12V 300A Box Lot 11480 Air Compressor Inverter.
  • SuperStart 44003 44001 500 1000 Peak Amp Compact Compressor Super Start.
  • SUPERSTART 44002 Super Start Portable Battery Power Pack.
  • Quick Cable 12 Volt 1500 950 1000 4000 4400 Peak Amp Starting 60....
Check Stock

Air Foot Pedal and Air Switch Combo Set - Fits All Harbor Freight Hydrostar Drain Monster Drain Cleaning Machines.

  • Fits All Harbor Freight Hydrostar Drain Monster Drain Cleaning Machines..
  • Air Foot Pedal: 8' Long and flexible hose - Heavy duty neck and bulb - molded one piece construction..
  • Riveted aluminum plate on the bottom of the foot pedal..
  • Air Switch - Two pole air switch assembly, 21A 125/250 VAC.
  • Package includes: 1- air foot pedal, 1-air switch - with 1- nut to hold the air switch in place on the machine and 1- hose compression fitting to....
Check Stock

Hydrostar Drain Monster Air Foot Pedal Fits 68284 & 68285 and All Harbor Freight Drain Cleaners - USA Made Version Of The Original 5 Foot Air Pedal

  • Made In USA duplicate of Hydrostar Drain Monster Air Pedal.
  • One Piece Molded Rugged Heavy Duty Design.
  • Snug Hose Fit - No Compression Nut needed or re-use original.
  • Fits all Harbor Freight Drum Drain Cleaners.
Check Stock

Mingle Pressure Washer Gun Adapter, to 1/4'' Quick Connect Fitting, Fit Most Brands (Bosch (Not AQT) / Husky)

  • ★Adapter for pressure washer gun from Bosch (not AQT), Husky, Greenworks, Plusar, Homelite, Powerclean, Ryobi, Powerclean, Harbor Freight, Powerwasher..
  • ★Convert to 1/4’’ Quick Disconnect female fitting. Connect gun to power washer nozzle tips or foam cannon with 1/4’’ plug..
  • ★Material: brass and stainless steel. Quick release socket is made of brass..
  • ★#1 fits Karcher K Series. #2 fits Bosch AQT, AR North America. #3 fits Bosch (not AQT), Husky, Greenworks, Plusar, Homelite, Powerclean, Ryobi, Powerclean, Harbor Freight, Powerwasher. #4 fits Lavor New Type, Lavorwash, Campbell Hausfeld, PowRyte Elite 2100 PSI, 2500 PSI, Paxcess. #5 fits Nilfisk Gerni. #6 fits Nilfisk Kew Lavor Old Type, Alto, pacific hydrostar.. #7 fits Karcher HD, HDS. #8 fits Nilfisk Kew Quick Release. #9 fits Sun Joe SPX Series ( AISN: B07SN2FCYD )..
Check Stock