Categories

Best Power Framing Nailers

Lisa Parker Hocus Pocus Eyeglasses Case One Size Various

  • For use in 30 to 34 degree paper tape collation framing nailers.
  • Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber.
  • Offset full head, also compatible with clipped head framing nailers.
  • New and improved packaging helps protect product during shipment.
Check Stock

Metabo HPT Air Compressor | THE TANK™ | 200 PSI | 6 Gallon | Pancake | EC914S

  • MORE PRESSURE: At 200 PSI, this compressor offers 25% greater PSI than a basic pancake compressor.
  • 30% MORE AIR FLOW: 4 CFM @ 90 PSI allows for multiple large body nailers to be used on a single compressor.
  • VERSATILITY: Simultaneously runs 2 framing nailers or 2 roofing nailers or 2 siding nailers or 3 finish nailers or 5 brad nailers.
  • PRODUCTIVITY: Consistently drives nails flush with no delay.
  • LIGHTWEIGHT: At only 41 lbs, it is 22% lighter compared to a traditional twin-stack compressor.
  • CAPACITY: 6-gallon tank provides all the air to run a crew.
  • DURABLE: All metal handle outlasts the harshest demands of the jobsite.
  • LOW MAINTENANCE: Oil-free design for essentially no maintenance.
  • AWARDS: 2014-2019 Pro Preferred Brand for pneumatic nailers by Builder & Developer Magazine.
Check Stock

Apex Tool Supply 9R208924 Replacement for DeWalt 9R208924 Nailer No Mar Tip (2 Pack) DWFP12233 Type 1

  • Everything You Need: This kit features a 21 degree framing nailer, 16-gauge straight finish nailer, 18-gauge brad nailer, 18-gauge narrow crown Stapler, 23-gauge micro pin nailer, fine wire stapler, and mini palm nailer – plus 2 canvas bags and fasteners for each tool..
  • Pro Design: This versatile 9 piece combo kit includes nailers to use on nearly every project, from arts and crafts to framing and decking and any job in between. Fasteners are also included for each tool, so you can get started on your project right away..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

BOSTITCH Framing Nailer, 33-Degree Paper Tape (F33PT)

  • Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications.
  • Patented push button adjustable depth guide of the framing nailer gun sets nails to desired depths.
  • Lightweight magnesium design for durability.
  • Adjustable rafter hook allows users to hang tool on rafters and joists.
  • Drives 1-1/2-inch STRAPSHOT fasteners as well as all other 1-1/2-inch and 2-1/2-inch metal connector nails (.131-inch - .162-inch diameter).
  • Drives 2- to 3-1/2-inch paper tape collated framing nails and 1-1/2- to 3-1/2-inch paper tape metal connector nails.
  • Metal connector capability includes interchangeable tip for use on joist hangers, hurricane straps, etc.
  • 1050-inches-per-pound of driving power for tough engineered lumber applications.
  • Includes 2 quick change nosepieces to convert tool to either framing or metal connector applications.
  • Lightweight magnesium design for added durability.
Check Stock

BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL) & Air Compressor Combo Kit, 3-Tool (BTFP3KIT)

  • Product 1: Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer.
  • Product 1: 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications.
  • Product 1: Lightweight magnesium housing.
  • Product 2: CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor..
Check Stock

Piston Bumper Stop 901901 Compatible with Porter Cable FC350 FR350

  • Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
  • Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
  • This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
  • Warning:It does not fit FR350 MAG Type 1 nailers!!!.
Check Stock

B&C Eagle A3X131/33 Offset Round Head 3-Inch x .131 x 33 Degree Bright Smooth Shank Paper Tape Collated Framing Nails 500 per box

  • For use in 30 to 34 degree paper tape collation framing nailers.
  • Bright finish for interior use in non-treated lumber only.
  • Offset full head, also compatible with clipped head framing nailers.
  • New and improved packaging helps protect product during shipment.
Check Stock

Gripe Rite Prime Guard GR08RHG1M 21° Plastic Strip Round Head Exterior Galvanized Collated Framing Nails, 2-3/8\ x 0.113\

  • For best results, use with grip-rite Grtfr83 and/or Grtrh350 21 Degree round head framing nailers.
  • Compatible with most 21 Degree round head framing nailers including: BOSTITCH, dealt, Duo-Fast, Hitachi, Makita, PORTER-CABLE, Ridgid and Senco.
  • For use on all exterior applications and with all treated lumber.
  • Proprietary polymer coating is equivalent in performance to galvanization that meets ASTM A153, Class D as tested under ICC-ES AC 257.
  • Meets or exceeds ASTM F1667 (if applicable).
Check Stock

Grip Rite Prime Guard GRP10RHGH1 30 Degree Paper Tape Offset Round Head Exterior Galvanized Collated Framing Nails 3 x 0.120

  • For best results, use with Grip-rite GRTFC83 and/or GRTCH350 30 degree paper tape offset round head Framing nailers.
  • Compatible with most 3--34 degree Paper tape Framing nailers, Including: Bostitch, DeWalt, Hitachi, Makita, Palode, Porter-Cable, Ridgid, Senco.
  • For use on all exterior applications and with all treated lumber.
  • Proprietary polymer coating is equivalent in performance to galvanization that meets ASTM A153, Class D as tested under ICC-ES AC 257.
  • Meets or Exceeds ASTM F1667 (if applicable).
Check Stock

B&C Eagle A314X131HD/28 Offset Round Head 3-1/4-Inch x .131 x 28 Degree Hot Dip Galvanized Smooth Shank Wire Collated Framing Nails 500 per box

  • For use in 28 degree wire collation framing nailers.
  • Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber.
  • Offset full head, also compatible with clipped head framing nailers.
  • New and improved packaging helps protect product during shipment.
Check Stock

Grip Rite Prime Guard GR034HG1M 21 Degree Plastic Strip Round Head Exterior Galvanized Collated Framing Nails 3-1/4 x 0.131

  • For best results, use with Grip-Rite GRTFR83 and/or GRTRH350 21 degree round head framing nailers.
  • Compatible with most 21 degree round head framing nailers including: Bostitch, dealt, Duo-Fast, Hitachi, Makita, Porter-cable, Ridgid and Senco.
  • For use on all exterior applications and with all treated lumber.
  • Proprietary polymer coating is equivalent in performance to galvanization that meets ASTM A153, Class D as tested under ICC-ES AC 257.
  • Meets or Exceeds ASTM F1667 (if applicable).
Check Stock

BHTOP AP67 Aluminum Magazine (#885-827) for Hitachi NR83A3 Framing Nailers

  • For Hitachi NR83A3 Framing Nailers and BHTOP Framing nailer.
  • For 21 Degree 2" to 3-1/4"(50-83mm) framing nails..
  • Fastener Type: Full Round Head, Plastic Strip Collation.
Check Stock

B&C Eagle A3X120HDR/33 Offset Round Head 3-Inch x .120 x 33 Degree Hot Dip Galvanized Ring Shank Paper Tape Collated Framing Nails (500 per box)

  • For use in 30 to 34 degree paper tape collation framing nailers.
  • Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber.
  • Offset full head, also compatible with clipped head framing nailers.
  • New and improved packaging helps protect product during shipment.
Check Stock