Categories

Best Power Generation Modules

Thrustmaster eSwap X PRO Controller Compatible with Xbox One Series X|S and PC

  • Fully modular professional gamepad .Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable....
  • New next-generation (NXG) mini-sticks: a longer lifespan, and greater precision.
  • T-MOD technology and Hot Swap feature lets you swap a module with any other — at any point in a game.
  • Extremely high-precision modules and action buttons, with minimal response times.
Check Stock

Generac 7000 50 Amp Smart Management Module, Gray

  • Wire-free technology: smart management modules are self-aware and operate autonomously.
  • automatically shedding the managed loads to allow the generator to recover if sensing a drop in frequency.
  • Prioritize loads: power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used.
  • Lock-out feature: Smart Management Modules feature a lock-out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often.
  • Externally visible L.E.D. status: view load status without opening the electrical box for convenient management of power during an outage.
Check Stock

Generac 7006 100 Amp Smart Management Module, Gray

  • Wire-free technology: smart management modules are self-aware and operate autonomously.
  • automatically shedding the managed loads to allow the generator to recover if sensing a drop in frequency.
  • Prioritize loads: power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used.
  • Lock-out feature: Smart Management Modules feature a lock-out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often.
  • Externally visible L.E.D. status: view load status without opening the electrical box for convenient management of power during an outage.
Check Stock

SparkFun XBee Explorer Dongle - Red

  • UART communication board, XBee interface, USB interface.
  • XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
  • Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
  • USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
  • Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock

Miro NR07S Humidifier - Completely Washable Modular Humidifier, Easy to Clean, Easy to Use, Large Room - Cool Mist, Sanitary, Top-Fill Ultrasonic Humidifier with Whisper Quiet and Powerful Output

  • Completely washable, easy-to-clean sanitary design. All modules can be washed without any special equipment..
  • Miro’s 4th generation powerful ultrasonic mist-maker engine allows 8 hours of continuous operation at maximum power, and more than 24 hours at minimum power. 600 sq. ft. maximum coverage..
  • Refill the 1.3 gallons(5liters) bowl without stopping operation..
  • Miro’s NR07S received IFDesign Award for its elegant and modern design that blends with most environments..
  • Universal (220v-110v) to 26v DC Electrical Adapter. USA 2-prong plug, UL Certified..
Check Stock

TACKLIFE 1200A Car Jump Starter for up to 8L Gas and 6L Diesel Engines, 12V Car Battery Booster, Portable Power Pack with Quick Charge 3.0 and Type-C port

  • 【Powerful Yet Compact】With quad power supply modules, the KP120 battery booster can output 1200A peak current and generate more than 13,500 joules energy in 3s, starting 12V vehicles with up 8L GAS or 6L Diesel engines. 30% thinner than the previous generation of TACKLIFE’s jump starter, making it easier to carry while travelling..
  • 【Upgraded Safety & Easy to Use】 This jump start battery pack uses the newest version clamps featuring with nine advanced safety technology, which makes operations safe and secure. The built-in indicator notifies you for improper operations.
  • “BOOST” button allows to force “on” the jump start function when a battery is too drained and totally dead..
  • 【Type-C & Two-way Fast Charging】Integrated Type-C port allows you to recharge 50% faster than usual. Three hours to recharge from 0 to 100%. The new generation dual USB port intelligently adjusts power output to charge each connected device simultaneously safely. With up to 18W Quick Charge 3.0, you can charge smartphones from 0 to 80% in only 35 minutes..
  • 【Multifunctional】The 12~15V 10A DC output port with included cigarette adapter can conveniently power car air pumps, car vacuums, and other car accessories. Ultra-Bright L....
Check Stock

AUECOOR 1120 Watts Solar Panel Wind Turbine System(Hybrid kit) : 6 pcs120W Mono Solar Panel+ 400W Wind Turbine Generator+ 2000W Pure Since Wave Inverter+mppt Hybrid Controller

  • no hot-spot heating guaranteed. Advanced encapsulation material with multilayered sheet laminations to enhance cell performance and provide a long service life. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. withstand high winds (2400Pa) and snow loads (5400Pa)..
  • WIND TURBINE : 400W 5-Blade Wind Turbine with a 2.5m/s start up speed for constant and efficient power generation exceeding a similiar 3-blade turbine.
  • High efficiency : High module conversion efficiency. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments..
  • The Solar &Wind Hybrid Power Kit is ideal for remote areas to generate power in all year. Solving the pure solar panel system low efficiency problem in low temperature and strong wind.Hybrid Kit can help you to generate power in all seasons and save energy..
  • Warranty:25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate.
  • 5-year material and workmanship warranty. Solar wind kit will be delivered in separate packages due to the size restrictions by shipping courier..
Check Stock

AUECOOR 520W Kit 120W Mono Solar Panel+400W Wind Turbine+Hybrid Charge Controller for Home Off Grid System, RV, Caravan, Boat

  • ...is ideal for remote areas to generate power in all year. Solving the pure solar panel system low efficiency problem in low temperature and strong wind.Hybrid Kit can help you to generate power in all seasons and save energy..
  • 400W FIVE Blades Wind Turbine with a 2.5m/s start up speed for constant and efficient power generation ,exceeding a similar THREE Blades wind turbine. Using patented permanent magnet generator and special stator. Effectively reducing torque resistance and guarantees the stability..
  • no hot-spot heating guaranteed. Advanced encapsulation material with multilayered sheet laminations to enhance cell performance and provide a long service life. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. withstand high winds (2400Pa) and snow loads (5400Pa)..
  • Warranty:25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate.
  • 5-year material and workmanship warranty. Solar wind kit will be delivered in separate packages due to the size restrictions by shipping courier..
Check Stock

Snapmaker 2.0 Modular 3-in-1 3D Printer A350T/A250T with One Black PLA Filament, Upgrade 3 in 1 3D Printer with 3D Printing/Laser Engraving/CNC Carving (A350T)

  • ★【3-in-1】- Snapmaker 2.0 Modular 3-in-1 3D Printer A350T/A250T unlocks your full creative potential, from 3D printing to laser engraving, cutting, and CNC carving. Smarter, faster, larger, and more powerful than ever before, it is a new generation of 3-in-1 3D printer that comes with everything you need..
  • ★【Large Work Area】- Snapmaker 3D printer A250T offers a large work area of 230 × 250 × 235 mm, and A350T expands it to 320 × 350 × 330 mm, where you can make large prototypes, or multiple smaller objects in one go..
  • ★【Modular Design】- A350T/A250T can be personalized with a wide variety of modules and add-ons. For a greater level of applications, we have Enclosure, Rotary Module, Emergency Stop Button, CAN Hub, and Air Purifier available now. And there are more to come.The new Power Module uses a much quieter fan whose speed can be adjusted automatically accroding to the real-time temperature, realizing a noise level decrease of about 16 dB [1], so that you can truly focus on your making..
  • ★【Noise Reduction Chip & Lead Optimization on Linear Module】- Although the levels might vary, certain parts of the machine can produce noise while operating. With the new A350T/A250T Linear Modules, the noise gets reduced substantially....
Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

Corcom - Te Connectivity Power Entry Module, Plug, 6A - PS0S0SS60

  • Delta 06AN2 Power Entry Modules, Snap-in Mounting.
  • AC Power Entry Modules PEM 115/250VAC 6A Snap Metal SP Switch.
Check Stock

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

  • Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
  • This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
  • Aspherical glass lens provides tight Dot Laser in large temperature range..
  • Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Aidixun OBD2 KKL 409.1 VAG-COM USB Cable Auto Scanner Tool Suitable for Skoda, VW and Seat

  • Please read the product description before ordering, check if your car model suitable for the vcds cable or not..
  • New 7 PIN/SKC codes match the anti-theft system that installed mobilizer VW/Seat/Skoda car key (the third-generation anti-theft system). The vag cable can simultaneously observe three sets of data stream..
  • Read/Clear Diagnostic trouble codes, read Control Modules, Code Modules. Fully automatic support for 2002+ A-u-d-i models with dual K-lines.
  • Only Support Windows System 32 bit. Please read the User Manual on the CD carefully before installing and using the vag obd2 cable..
  • Package: 1 pc OBDII USB VAG COM KKL 409 with CD. If the CD can not be read, please contact with us for software download link..
Check Stock