Turbo Bowling Grips Bowler's Tape 40Piece with Case- 1\ White
- Performance Fitting, Protection and Release Tape The days of using tape strictly for adjusting fit are a thing of the past.
- Get the Power to Excel with the industries most advanced tape technology.
- Slowest Release, Extra Thick Profile, Single Stretch Cotton, Fitting: 5, Protection: 5, Release: 1 Our new line of performance tapes provide you with superior protection against blisters, cuts and abrasions, and are available in five distinct styles.
Check Stock
NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED
- Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
- Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
- Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
- 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
- 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock
Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT
- EASY TO USE. Easily connect 1/2″ drip irrigation tubing to any standard 3/4″ faucet, hose bibb or garden hose. Just insert and twist, no special tools needed. Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal..
- STRESS-FREE FIT. Our faucet connection adapter works with the widest range of half inch tubing, from .520 to .620″ Inside Diamater, .620 to .710” Outside Diameter and .045 to .055 Wall Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
- ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
- REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
- PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing i....
Check Stock12V/24V Auto 4 Port Underdash Compact Heater Kit 12X Copper Tube+Speed Switch Set For Truck Universal Trucks Minivans Excavators Harvesters Tricycles. (12 V)
- 1.Fitting required - 5/8'' (16mm) inner diameter water hose.
- 2.Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..
- 3.Comes with mounting brackets and control switch..
- 4.Very easy to install , only need to hook this heater up to water tank and supply power , then works..
- 5.INSTRUCTIONS: The red line is connected with a power supply's positive pole and motor's positive pole. The blue one is connected with the motor's negative pole. The black line is connected with a power supply's negative pole..
Check StockSpeedway Motors Universal 1964-72 GM Power Steering Hose Kits
- Power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits.
- Return hose will normally need to be cut to length.
- High Pressure Line: 24" long, Inverted flare fittings, one 5/8"-18 and one 11/16"-18.
- Return Hose: 25" long, 5/8"-18 inverted flare fitting.
- 1964-72 GM Power Steering Hose Kits help complete your project.
Check StockWATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
- ...i. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
- 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
- 5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
Check Stock
Auto 4 Port Underdash Compact Heater Kit 13X Copper Tube+Speed Switch Set for Truck Universal Trucks Minivans Excavators Harvesters Tricycles
- ♥【Specification】①Optional Voltage: 12V.②Power supply: 12V / 8A.③Material: Copper, Iron.④Weight: about 3KG. ⑤Size: 23 x 21 x 10cm/9.3" x 8.5" x 3.9". ⑥Fitting required - 5/8'' (16mm) inner diameter water hose..
- ♥【Feature】①Comes with mounting brackets and control switch.②Very easy to install , only need to hook this heater up to water tank and supply power , then works..
- ♥【Package】Included: ①1pcs x heater. ②4pcs x Black tubes. ③2pcs x Tee. ④2pcs x mounting brackets.⑤1pcs x switch.⑥2pcs x straight fittings. ⑦8pcs x 16-25cm hose clamps..
- ♥【Instructions】①The red line is connected with a power supply's positive pole and motor's positive pole.②The blue one is connected with the motor's negative pole.③The black line is connected with a power supply's negative pole..
- ♥【Using】①Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..
Check StockGlowShift 3/16” MAP Line Boost T-Fitting Adapter Compatible with Ford F-Series 1992-1997 & F-250 F-350 Super Duty 7.3L 6.0L Power Stroke 1999-2007 - 1/8-27 NPT Sensor Port - Includes Hose Clamps
- GlowShift Boost MAP Line T-Fitting Adapter Allows Users to Install a Boost Hose or Sensor to the MAP Line for Accurate Readings Directly from the....
- Compatible with 1992-1997 Ford F-Series 7.3L Power Stroke, 1999-2002 Ford Super Duty 7.3L Power Stroke, 2003-2007 Ford Super Duty 6.0L Power Stroke,....
- Features a 1/8-27 NPT Female Thread Port, (2) 3/16" Barbed Fittings & (2) Hose Clamps.
- Includes Step-By-Step Installation Instructions.
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check StockOatey 43791 PVC Saddle Tee Kit, 4-Inch x 2-Inch,White
- The product is highly durable and easy to use.
- For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
- Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
- The tee accepts the incoming line inside the socket, or joins with a Sch. 40 DWV fitting.
Check Stock
Certified Appliance Accessories Ice Maker Water Line, 6 Feet, PVC Core with Premium Braided Stainless Steel
- ✔COMPATIBILITY: Compatible with water filter system or reverse osmosis with 1/4" or 3/8" plastic water line. Fits for iSpring, APEC Water Systems, Whirlpool, Express Water Reverse osmosis system, And Frizzlife MP99, Culligan, Brondell, Aquasana Water filtration system..
- ✔MULTI-USAGE: Provides pure water from your RO system or water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. The T fitting allows the system to function for both application with no loss in performance..
- ✔COMPLETE ICE MAKER WATER LINE KIT: 20feet NSF certified 1/4" tubing, TWO set compression fitting nut, 1/4" Tee fitting and 3/8" Tee fitting allow you to connect to both 1/4" and 3/8" water line water purifier system or RO system..
- ✔TOOL-FREE INSTALLATION: Push-in quick connect fittings offer easy DIY installation with no tools required..
- ✔HIGH QUALITY COMPONENTS & 100% SATISFACTION: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience..
Check Stock
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stockmistcooling 250 PSI Misting Pump
- Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
- 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..
Check StockSINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
- 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
- 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
- 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
- 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
- SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock
