Best Power Line Fitting Clamp
PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use
- [Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
- [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
- [Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
- [Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
- [Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
Check StockGaming Light for Desk, Streaming Light with Desk Clamp Stand for Twitch
- Gaming Light for Desk: 6 inches Ring light with 3 light modes (Cold Light,Mixed Light,Warm Light) and 10 adjustable brightness.
- Streaming Light for Twitich: USB power supply, comes with 1/4''-20 female Thread, can work on Tripod, Monopod, Light Stand.
- Desk Clamp Stand: height can be adjusted from 13.5inches/34.5centimeters to 23.2inches/59centimeters through fixed knob.
- Desk Clamp: The clamp is adjustable for fitting different table through adjust the knob and screw. The clamp can support the table thickness from from 0.4 inches to 4.7 inches. with EVA silicone Non-Slip Mat.
Check StockClass A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP
- 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check StockClass A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP
- 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check StockClass A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
- 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check StockDERNORD 1.5" Inch (OD50.5mm) Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater (120V 1500W)
- Stainless Steel Tri Clamp 1.5″ Inch (OD 50.5mm) , fit 1.5″(38mm) pipe if that pipe has a 2″ flange for tri clamp.
- SUS304 Tri-clamp Foldback heating element provides 1500w 120v of power.
- Easy to Install and fits Standard 1.5″ Tri Clamp fitting of American.
- The shape is to minimize length and maximize heated surfaces.
- Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check StockSierra International Moeller Marine 053701-10, Six Gallon All-in-1 Fuel Tank Combo Package
- Industy's first all in one fuel tank combo package.
- Applications with 2 prong barb engine fitting: 1998 and up Mercury, All J/E, most Yamaha O/B engines.
- Includes: one Universal fuel line, one quick disconnct to fuel connector, three fuel line connectors (Johnson/Evinrude, Mercury, Yamaha), tank connector with sealant and hose clamp.
Check StockRV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper
- 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check StockEliseo 1.5'' Sanitary Tri-Clamp, 304 Stainless Steel Single Pin Heavy Duty Tri Clamp Clover with Wing Nut for Ferrule TC 1.5''(4 Pack)
- 【PACKAGE INCLUDE】: 4 Pack 1.5 inch single pin tri clamp with 4 Pack tri-clamp rubber Gasket.
- 【SANITARY CLAMP SIZE】Tube OD: 1 Inch to 1-1/2 Inch, Tri Clamp: 1.5inch, Ferrule Size: 2inch (50.5MM).
- 【HEAVY DUTY TRI-CLOVER CLAMP】Tri-Clamp made of 304 stainless steel, higher corrosion resistance than the 302 grade stainless steel, ideal for most intended tri clamp fitting connections.
- 【WING NUT STYLE SINGLE-PIN CLAMP】The wing nut style tightening screw allows for quick and easy assembly without tools.
- 【SANITARY FITTING FOR HOME BREWING】Single hinge clamp is widely used in beer, beverage, pharmaceutical and chemical industry.
Check StockDERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)
- Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
- Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless steel 304 for resistance to corrosion and high temperatures.
- Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
- Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check Stock6 Pieces 1.5 Inch Sanitary Fitting Cap Stainless Steel 304 Sanitary End Cap Pipe Fitting Clamp Solid End Caps Blind Tri Caps Clamp for Dairy Products Food Wine Beverage Cosmetics Engineering
- What you get: You will get a total of 6 sanitary tube caps suitable for 1.5 inch clamps, beautiful internal and external polishing, beautiful internal and external mirror surfaces, and smooth surface, acid and alkali resistance, corrosion resistance.
- Quality material: this sanitary fitting cap is made of quality stainless steel 304, therefore, it's sanitary, rust and resistance to corrosion and high temperatures with long service life.
- Easy replacement: it is standard size and regular material parts compatible with most standard size clover or clamp fittings, the solid end cap should be combined with a gasket and clamp to make a sanitary and easily cleanable connection.
- Sealing performance: this stainless sanitary fitting cap has good sealing performance, it is clamping on to the end of a pipe or tube to close the line, providing a non-permanent seal that provides take down access.
- Widely use: these stainless steel end caps can be applied in the dairy products, food, wine, beverage, cosmetics, mechanical and electrical engineering, mechanical manufacturing and and other sanitary process industries.
Check StockRaindrip 100050100 1/4\ 50' White Tubing, 0.25 inches x 50 Feet
- Slowly waters the soil around your plants for complete root zone hydration.
- Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants.
- Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in..
- connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector.
- As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist.
- Flexible tubing bends to accommodate curved irrigation areas as well as straight runs.
- Porous non-pressure compensating material gently seeps water out of the entire line of tubing.
- Comes with one 50 ft. coil of ¼ in. Soaker Tubing.
- in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch, excess water will gradually seep out.
Check StockApollo Stainless Steel Crimp Clamp Tool - 1 Each
- ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
- Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
- Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
- Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
- A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..
Check Stock