Categories

Best Power Line Fittings

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

  • Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

  • straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock

Brake Line Fittings - MuHize 32 PCS Brass Brake Line Fitting Kit for 3/16\ and 1/4\ Inverted Flares Brake Line Tube

  • PACKAGE INCLUDE -Part 1: MuHize upgraded 16 Fittings for 3/16”Brake Line: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • PACKAGE INCLUDE - Part 2: MuHize upgraded 16 Fittings for 1/4”Brake Line: ① 2 x 1/4”(7/16-24) Inverted Tube Nut.
  • ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long).
  • ③ 2 x 1/4”(9/16-18) Inverted Tube Nut.
  • ④ 2 x 1/4”(1/2-20) Inverted Tube Nut.
  • Note：The nut threads are regular 1/4 inch tube fitting size. Please check before shopping!.
  • HIGHER QUALITY - MuHize brake line fittings are made of durable material with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 or 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 or 1/4 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

Five Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank

  • This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
  • Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
  • This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
  • Barbs provide excellent gripping power for fuel line connections.
  • We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

  • Fits 5/16 inch and 3/8 inch inside diameter fuel line.
  • Not for fuel injected systems, Max inlet pressure 9 PSI.
  • Adjusts fuel pressure from 1 to 6 pounds.
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Eemax SPEX95T LavAdvantage Thermostatic Electric Tankless Water Heater

  • Hot or cold water feed, microprocessor temperature control for accurate temperature, fitted with 1/2 inch Copper pipe Compression fittings with rear....
  • Kitchen sink, bar sink in-line booster, eliminates long waits for hot water by producing hot water immediately then gradually reducing its power input....
  • Ideal for hand set Showers, pool house, spare bedroom & vacation homes, in-line booster for existing tank heater, back up system for solar heating,....
Check Stock

Speedway Motors Universal 1964-72 GM Power Steering Hose Kits

  • Power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits.
  • Return hose will normally need to be cut to length.
  • High Pressure Line: 24" long, Inverted flare fittings, one 5/8"-18 and one 11/16"-18.
  • Return Hose: 25" long, 5/8"-18 inverted flare fitting.
  • 1964-72 GM Power Steering Hose Kits help complete your project.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

wolltex 3 in 1 Wrap Air Power Line 15 Feet Heavy Duty 7 Way semi Truck Trailer Electrical Cable ABS Wire & Air Hose Assembly with Aluminum Service Emergency Glad Hands (Hosses with accesories)

  • KIT CONTAINS: 3-IN-1 Heavy duty 15 feet trailer air line & ABS wrap cord assembly + 1 pair Gladhands (Red + Blue) + 1 pair Extension Handles..
  • THE 3 IN 1 AIR POWER LINE CONTAINS: Service air line rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃), Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
  • THE EXTENSION HANDLE: Installed between glad hands and air brake lines. It is easy to install. Provides added leverage for coupling/uncoupling gladhands without damaging the hose ends and fittings. Rugged anodized aluminum is more durable and corrosion resistant than cheaper plastic models. Diamond knurled textured exterior for improved friction..
Check Stock

mistcooling Pre-Assembled, Low Pressure System Kit,25' Mist Ring,Recommended for Fans with 30-46'' Di, 25 Inch Diameter 8 Nozzles, Beige Color Tubing

  • 8 - Nickel-plated brass Nozzles, 7 misting Line Tubing,1 - 6 ft feed Line,1 - end elbow, 7 - misting tee, 8 Zip ties.
  • Nozzles:Nickel-plated brass button series ,With stainless-steel Orifice ,Standard 10/24” thread ,in 0.015” OD Orifice ,Rust-resistant fixed impeller pin.
  • Fittings :¼” OD Compression Fittings,Beige Color to blend with most patios and backyards,Compression Type Fittings,Leak Proof.
  • Garden Hose Adapter : ¾” OD, Fits most Garden Faucets ,With Filter Washer to protect your nozzles.
  • Tubing :¼” OD Flexible PE Tubing ,Operating Pressure 40 to 100 PSI ,UV Resistant Flexible Tubing.
  • 25'' Fan Mist Ring with 8 or 10 Nozzles -Recommended for fans with 30-46'' Diameter.
  • Supply Line : 6 Ft Feed Line, Low Pressure tubing , Beige Feed Line.
  • Simply fix to your garden hose and ready to use.
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock