Categories

Best Power Miter Saws Dual Bevel

Milwaukee M18 18-Volt FUEL Lithium-Ion Cordless Brushless 10 in. Dual Bevel Sliding Compound Miter Saw Kit

  • Milwaukee POWERSTATE Brushless Motor provides more power, more run-time, and longer life. The Milwaukee REDLITHIUM Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life..
  • REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity..
  • 5-3/4" Vertical Capacity (Base Board Against the Fence), 2x12 Horizontal Capacity (Laying Flat at 90°),5-1/4" Vertical Capacity Nested Crown Cam Locking Miter System with Adjustable Stainless Steel Miter Detent Plate and 11 detent locations, Dual Bevel with 9 detents and easy access bevel lever, Shadow Cut Line Indicator for quickly lining up cuts..
  • Top and Side Carrying handles for maximum portability Detent Override for Easily Setting Miter Locations Outside of Detents Up to 400 Cuts per Charge Tall Sliding / Removable Fences to Support Large Base and Crown Against The Fence, Easy Access Blade Change.
  • What's Included (1) M18 FUEL Dual Bevel Sliding Compound Miter Saw (2734-20), (2) M18 REDLITHIUM HIGH DEMAND 9.0 Battery Pack (48-11-1890), (1) M18 & M12 Rapid Charger (48-59-1808), (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp, (1) Dust Bag.
Check Stock

Saw, Miter - 10 Electric Miter Saw: Single Cut, Saws - Power

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
  • SLIDE SYSTEM: Linear ball bearing slide system.
  • POSITIVE STOPS: Positive stops on miter and bevel scale, for easy to read measurements and quick settings.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

Delta 26-2240 10 In. Dual Bevel Sliding Cruzer Miter Saw,, Gray

  • 10 in. Blade with versatile ip-down fence design provides best-in-class 16 in. Crosscut capacity.
  • Dual bevel 45 left/45 right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops.
  • 50 left miter/60 right miter capacity with 10 miter detents and positive stops and 15 amp motor for powerful cuts and blade brake for safety.
  • One-hand front miter Controls with push button miter detent override and front bevel release for quick movement.
  • Molded handle and full size trigger is comfortable for right or left handed users.
Check Stock

Skil 10" Dual Bevel Sliding Miter Saw - MS6305-00 & WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets

  • Product 1: POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts.
  • Product 1: DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right.
  • Product 1: LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers.
  • Product 1: 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees.
  • Product 2: Universal design fits nearly every miter saw on the market, including all WEN miter saws.
Check Stock

4410 4412 4000 3915 5412L 4100DG-09 4405 5412 GTS1031 Carbon Brushes compatible with Bosch Miter Table Saw

  • compatible with: Bosch: 4412 (0601665039) 12" Miter Saw 4412 (0601665039) 12" Miter Saw 4000 (0601476139) Table Saw 4000 (0601476139) Table Saw B3915....
  • compatible with: Bosch: 4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw 4212L () 12" Dual-Bevel Upfront Control & Laser....
  • compatible with: Bosch: 4212 (060166F035) Miter Saw 4212 (060166F035) Miter Saw 4410 (060166E139) Miter Saw 4410 (060166E139) Miter Saw 4212L....
  • We have been specializing in the production of carbon brushes for 20 years. Our products are not only supplied to Chinese customers, but also sold to....
Check Stock

12 In. Dual Bevel Sliding Cruzer Miter Saw

  • Shadow guide cutting line projects a consistent and accurate cutting line on your work piece.
  • Product dimensions – 30” D x 25.5” W x 21.5” H | Weight – 57 lbs. | Voltage – 120V | Blade size – 12” Diameter | Arbor hole size – 1” | Speed – 4,000 RPM | Max cut thickness – 6.5” | Cord length – 7 ft..
  • One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety.
  • Molded handle and full size trigger is comfortable for right or left handed users 15 amp motor for powerful cuts and blade brake for safety shadow guide cut line for repeatable accuracy.
  • Dual bevel 47° left/47° right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops | 50° left miter/60° right miter capacity with 10 miter detents and positive stops.
Check Stock

Delta 10" Sliding Compound Miter Saw 26-2241

  • Shadow guide cutting line projects a consistent and accurate cutting line on your work piece.
  • Product dimensions – 29.5” D x 22.5” W x 20” H | Weight – 55 lbs. | Voltage – 120V | Blade size – 10” Diameter | Arbor hole size – 5/8” | Speed – 4,000 RPM | Max cut thickness – 5.5” | Cord length – 7 ft..
  • One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety.
  • Molded handle and full size trigger is comfortable for right or left handed users 15 amp motor for powerful cuts and blade brake for safety shadow guide cut line for repeatable accuracy.
  • Dual bevel 45° left/45° right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops | 50° left miter/60° right miter capacity with 10 miter detents and positive stops.
Check Stock

ACEgoes 12" Miter Box with Saw Included, Reinforced Steel Back Saw for Accurate Cutting, Preset 90 Degree 45 Degree 22.5 Degree and 0 Degree Cuts

  • ☘【Accuracy】The cam-shaped pins can be twist and lock with honeycomb base to secure work for accurate cuts..
  • ☘ 【4 Cut Angles】Vertical slots in the miter box allow for the wood to be cut at 45 degrees, 22 1/2 degrees, and 90 degrees. and bevel cut at 45 degrees..
  • ☘【Durable】This miter box is made of high-impact polystyrene, sturdy built 1.5lb better than normal. and The reinforced saw blade is made of premium steel, double-sided mechanical grinding..
  • ☘【Safe】Minor injuries are the most you can expect when properly using a manual miter saw.
  • ☘【Quiet】Little noise will not bother others compared to power saws.
Check Stock

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

  • An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
  • Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
  • Includes sturdy spacer for tandem Feather Board operations.
  • Dual slide motion - Side to side and forward action for quick and easy setup.
  • Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - provides maximum hold.
  • Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
  • Includes sturdy spacer for tandem FeatherBoard operations.
  • Dual Slide Motion - Side to side and forward action for quick and easy setup.
  • Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Metabo HPT 10-Inch Sliding Compound Miter Saw Double-Bevel Electronic Speed Control 12 Amp Motor Electric Brake 5-Year Warranty C10FSBS

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
Check Stock