Categories

Best Power Module Backplane

BestParts New HDD Upgrade Kit Add 4X 2.5 3.5\ HDD to 8X 2.5 3.5\ HDD Compatible with Precision T7920 7920 Add 2X Rear Flexbays 3 & 4, Flexbay 3 Flexbay 4

  • New Backplane and Replacement SAS Cable, Signal Cable, Power Cable.
  • You will receive: 1x Backplane 3x Cables.
  • Ensure it is compatible with your model and check pictures for more details.
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ... range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification wi....
Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (10 pieces)

  • 【QUALITY GUARANTEE】The Digital Audio Amplifier Power Module is made by a professional manufacturer and has undergone multiple tests. It has a very good quality guarantee and a 100% brand new high-quality brand..
  • 【HAVE A DIGITAL CHIP】The Digital Audio Amplifier Power Module is equipped with PAM8403 digital chip, which is a small digital amplifier chip, which can highlight the advantages of digital chip and bring you a good experience..
  • 【POWERFUL FUNCTIONS】The circuit of the Digital Audio Amplifier Power Module adopts reasonable configuration, the power filter is upgraded to 470 uf, and with 1.6 mm glass fiber board, it has excellent performance and powerful functions..
  • 【HI-FI SOUND QUALITY】The Digital Audio Amplifier Power Module outputs 3 w + 3 w high-fidelity sound quality, which can restore the most realistic scenes and bring you a good experience. It is a rare good choice for you.
  • 【THE ANTI-METER BODY】The Digital Audio Amplifier Power Module adopts the original anti-meter body, and the potentiometer with counterclockwise switch can directly cut off the power supply. It is safe and you can buy it with confidence..
Check Stock

Intel Server System M50CYP1UR212

  • INTEL CORP. SR2612URRNA INTEL SERVER SR2612URR.
Check Stock

New M.2 SAS Flex Bay Module Compatible with Dell Precision T5820 T7820 T7920 066XHV 66XHV w/ Tray Without SSD only for M Key 2280 M.2 NVMe (PCIe Gen3 x4) SSD

  • Note: If this item can not work, please check whether the part number of SSD backplane is 076W3N..
  • Fit Models : Dell Precision T5820 T7820 T7920.
  • You will receive: 1x Module w/ tray as pictured.
  • Ensure it is compatible with your model and check pictures for more details.
Check Stock

Dell Precision 5570 15.6" Workstation (2022 Model) Intel 12th Gen i7-12700H(14-Core) 512GB SSD 32GB DDR5 RAM NVIDIA RTX A2000 FHD+ (1920x1200) Non-Touch Win 11 PRO (Renewed)

  • Note: If this item can not work, please check whether the part number of SSD backplane is 076W3N..
  • Fit Models : Dell Precision T5820 T7820 T7920.
  • You will receive: 1x Module w/ tray as pictured.
  • Ensure it is compatible with your model and check pictures for more details.
Check Stock

StarTech.com 4 Bay 3.5 SATA SAS Backplane - 3 x 5.25in Bays - Trayless Mobile Rack - SATA Backplane - Removable Hard Drive Bay - HDD Rack HSB43SATSASB

  • Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
  • 4 Bay 3.5" SATA SAS Backplane with trayless design.
  • Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
  • 4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
  • 2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....
Check Stock

Power Supply, DPS3005 /DPS5005 Communication Version Bucks Power Supply Step-Down Voltage Converter(DPS3005-USB-BT)

  • The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one.DPS3005 /DPS5005 have same functions, only the technical parameters are different,for example, voltage, current ,etc.
  • This module has power-down stored function and can store 10 groups preset value.And it also has the function of extracting quickly two groups stored value. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.
  • Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.
  • LCD display on the module has the function digital voltmeter and ammeter.You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc.
  • On the setting data interface, you can adjust over-voltage value, over-current value, o....
Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

  • Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
  • AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
  • corridor delay switch, delay energy-saving products.
  • Supply voltage: AC 220V power supply, Current: greater than 100mA.
Check Stock

2X Micro USB Charging Port Dock Power Connector Module Replacement Compatible with UE Boom 2 Bluetooth Speaker

  • USB Charging Port Dock Power Connector Module Replacement Compatible with UE BOOM 2 Bluetooth Speaker.
  • Tips: This is USB Charging Port Dock Power Connector Module replacement to replace your old damage USB Charging Port Dock Power Connector Module,....
  • Broken your USB Charging Port Dock Power Connector Module, don't need to change new machine, just buy this item and replce your damage USB Charging....
  • Compatible with: UE BOOM 2 Bluetooth Speaker (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • POWERFUL 10W DUAL LASER MODULE – The LASER TREE laser module has 80W machine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving ....
Check Stock

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
Check Stock