Categories

Best Power Modules

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

Corcom - Te Connectivity Power Entry Module, Plug, 6A - PS0S0SS60

  • Delta 06AN2 Power Entry Modules, Snap-in Mounting.
  • AC Power Entry Modules PEM 115/250VAC 6A Snap Metal SP Switch.
Check Stock

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

  • Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
  • This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
  • Aspherical glass lens provides tight Dot Laser in large temperature range..
  • Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Syongzida Twotrees TT-5.5 Laser Engraver Machine, Laser Cutter Engraving Machine DIY Laser Wood Engraver 300x400mm (20w Input Power& 5.5w Laser Power)(60% Pre-Installed）

  • 【5500mW high intensity laser head】 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
  • 【Ultra-Fine Compression, Upgraded high-performance fixed-focus laser】Engraving can be done without adjusting the focal length.
  • laser power is 5W-5.5W, ultra-fine laser focal area is reduced to 0.23mm^2, The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
  • 【Package includes】1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check Stock

MikroTik Cloud Core Router CCR1009-7G-1C-1S+

  • CCR1009-7G-1C-1S+ Supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
  • A SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you.
  • The unit is equipped with dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).
  • Unit comes with the 1U rackmount case and supports a Smart card, to store your private key for use in all features that support Certificate based authentication.
  • Comes with 1U rackmount, 7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, SmartCard slot, RouterOS L6.
Check Stock

Twotrees TT-2.5W Laser Engraver,Input Power 7500 mW Engraving Machine, 60% Pre-Assembled,DIY Laser Marking,CNC Laser Engraver Kit Laser Engraving Cutting Machine,Working Size:300x400mm(2.5W Laser)

  • 2500mW high intensity laser head, 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
  • The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
  • Package includes: 1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check Stock

405nm 445nm 450nm Laser Diode LD Driver Board 12V 2W Step-Down Constant Current Drive Circuit of TTL Modulation Power Supply

  • Direct Green Laser Diode for large temperature operation range. This module has integrated optic, laser diode, and APC driver circuit..
  • APC Driver Circuit enables the Laser output power safe and constant. Aspherical Glass lens provides tight Dot Laser in large temperature range..
  • Dimensions : Ø0.275" x 1.03" (Ø7 x 26.1 mm).
  • Wavelength : 505~530 nm. Laser output power : Class II - less than 1mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Actron CP7852 Automotive Logic Tester

  • Safely test most automotive electrical circuits to identify shorts, wire breaks, or failed sensors.
  • Easily check grounds on many circuits allowing quicker diagnosis time than traditional circuit tester or digital voltmeter.
  • Safe for Engine control modules or power train control modules.
  • Indicates presence of signal to fuel injectors, or tach reference signals.
  • High impedance input compatible with computer circuits and sensors.
Check Stock

Arduino MKR Connector Carrier [ASX00007]

  • Works with any of the Arduino MKR boards: Zero, WiFi, LoRa, Sigfox, GSM, NBIoT, and Vidor..
  • Easily connect up to 14 Seeed Studio’s Grove modules to your MKR board..
  • Ideal for fast projects: plug several modules and go! No soldering required..
  • Screw terminals to safely connect the carrier board to a power source..
  • Connect sensors and actuators to the Arduino IoT Cloud and control them remotely!.
Check Stock

MakerFocus Raspberry Pi 4 Power Expansion Board DockerPi Power Board 20W(5V 4A) Power Supply Safe Shutdown with Cooling Fan Infrared Remote Control Compatible with Raspberry Pi 4 and 3B+

  • DockerPi power board is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation..
  • ★It also supplies power to other DockerPi modules to protect the safety of the power supply. It also provides a safe shutdown function, supports infrared remote control switches, button control switches. The link for the one-step automatic installation is obtained in the product description. Restart the Raspberry Pi and complete the installation.
  • ★It has 3*3cm quiet cooling fan, can effectively cool down. We recommend that install the power board on the bottom of the other DockerPi..
  • ★It is recommended to connect 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi, If other modules require 12V power. Note: DockerPi Power Board does not support hot plug..
  • ★Official compatibility test. Support Raspberry Pi, Banana Pi M3, Orange Pi Zero. Other development boards can be compatible if they have I2C peripherals. Note: maybe need to change some software..
Check Stock

SamIdea 2 Pin 3 Pin PCB Mount Screw Terminal Block Connectors,Socket Strips 5.08mm Pitch for Arduino (Pack of 60pcs)

  • ★★★★★ REMINDS: You can separately buy 2 pin or 3 pin from our store,with ASIN: B07DQKSPWC(2PIN) and ASIN: B07DQTG6W5(3PIN). Application: Crystal Oscillator, IC Socket, DIY PCB Universal Board, Dupont Line, Digital tube, buzzer, Compatible with Arduino UNO board, PIC Programming unit, AVR ATMEL Programming unit, Connector Kit, USB to TLL Modules, Power Modules, LCD Modules, RS232 TO TLL Module.
  • ★★★★★ Rated Value : AC 300V, 16A,Pin Number :2&3(Mixed).
  • ★★★★★ Material : ABS Plastic, Electric Parts.
  • ★★★★★ Net Weight : Approx.179g.
  • Package Content : 30x 2P+30x 3p PCB Terminal Block.
  • ★★★★★ 100% satisfaction guarantee.
  • SamIdea is a Registered Trademark, can not sold without authorization..
Check Stock

Scosche BLQP-XTSP BaseLynx Pad Qi-Certified Modular Customizable Wireless Charging Station

  • Build A Baselynx Charging Station: Pick and choose which device type modules you need, how many of each you need, then connect them in your preferred order. Add modules or rearrange them as needed to work with Apple, Android and Samsung smart devices.
  • Qi-Certified Wireless Charging Station: The Qi-charging pad works with most Qi-enabled devices including Apple iPhones, Apple AirPods Charging Cases, Google Pixel 3/XL and Samsung Galaxy fast charge devices.
  • Single Power Source: Power the entire BaseLynx Charger system with the included 5-foot AC power cable through one of the end caps utilizing only one wall charging outlet to help you better organize your desk or counter.
  • Smart Charging Pad: The foreign object detection makes sure that charging only activates when your mobile phone or Apple Airpods Wireless Charging Case is properly placed over the charging area and when nothing else is obstructing that area.
  • Buy with Confidence: Backed by Scosche’s Lifetime Tech Support and 2 Year Warranty.
Check Stock

Scosche BLKIT4-SP BaseLynx Qi-Certified Modular Wireless Charging Station Compatible with all Apple Watches and Qi-Enabled Devices

  • Build Your Baselynx Charger: Pick and choose which device type modules you need, how many of each you need, then connect them in your preferred order.
  • Qi-Certified Wireless Charging: The Qi-charging pad works with most Qi-enabled devices including Apple, Apple AirPod Charging Cases, Google Pixel 3/XL....
  • Apple Watch Charging Station: Includes MFi-certified magnetic charging base designed exclusively for safely charging all Apple Watch models.
  • Protective Endcaps: End caps (left and right) protect the connectors on the fast charging modules.
  • Single Power Source: Power the entire BaseLynx system with the 5-foot AC power cable through one of the end caps utilizing only one wall charging....
Check Stock