Behringer ULTRABASS BX2000H 2,000-Watt Class-D Bass Amplifier with MOSFET Preamp, Compressor and DYNAMIZER Technology
- Ultra-high power, ultra-lightweight 2,000-Watt bass amplifier driven by classic MOSFET technology.
- Revolutionary Class-D amplifier technology for incredible power and sonic performance.
- High-voltage MOSFET preamplifier gives you the sound and feel of an authentic tube amp.
- Classic compressor increases sustain and smoothens out volume peaks when playing dynamic slaps.
- DYNAMIZER Power Management technology for ultimate punch and to capture every nuance of your playing.
Check StockPlanet Audio TR4000.1D Class D Car Amplifier - 4000 Watts 1 Ohm Stable Digital Monoblock Mosfet Power Supply Great for Subwoofers
- Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms.
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being....
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current....
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers....
- Strapping Capable - You are able to strap two TR4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the....
Check StockPlanet Audio TR5000.1D Class D Car Amplifier - 5000 Watts 1 Ohm Stable Digital Monoblock Mosfet Power Supply Great for Subwoofers
- POWER: 5000 Watts Max x 1 @1-Ohm, 2500 Watts Max x 1 @2-Ohms.
- CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being....
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely....
- 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers....
- STRAPPING CAPABLE: You are able to strap TWO TR5000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the....
Check StockBOSS Audio Systems R2504 1000 Watt 4 Channel Car Audio Power Stereo Amplifier with Remote Control and AKS8 Amplifier Installation Wiring Kit
- AMPLIFIER: 90 Watt x 4 Channel @ 4 Ohm RMS Power.
- 500 Watt x 2 Channel @ 4 Ohm Max Bridged Power.
- SPECIFICATIONS: Signal to Noise Ratio: >102dB.
- Dimensions: 10 7/16" W x 2 1/14" H x 10/23/32" L.
- WIRING KIT: 20 foot 8 gauge red power cable.
Check StockDD1718PA DC‑DC Step Up Module for ADC DAC LCD Power Supply Without Welding Operational Amplifier, for RS232, RS485, RS422 Bus(Turn positive or negative12V)
- 2-Ohm stereo & 4-Ohm bridged full range operation Military grade PCB w/ PWM MOSFET power supply Direct short, thermal, & overload circuit protection High/speaker level & low level/RCA input Pre-amp low-level RCA outputs.
- Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
- LED power (green) and protect (red) indicators.
Check Stock
BOSS Audio Systems PD3000 Class D Car Amplifier - 3000 Watts 1 Ohm Stable Digital Monoblock Mosfet Power Supply Great for Subwoofers
- Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms.
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
- Strapping Capable - You are able to strap two PD3000 amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
Check StockPyramid PB717X Arctic Series 1000 Watt Powerful Performance 2 Channel Class AB Car Truck Vehicle Audio Mosfet Amplifier Power Amp (4 Pack)
- POWERFUL PERFORMANCE: Enhance your vehicle's current audio system with this 1000-watt powerful amplifier.
- MOSFET POWER SUPPLY: Features regulated pulse width modulated Mosfet power supply over a wide range of battery voltage.
- DISTORTION-FREE SOUND: Silver-plated RCA ports eliminate the chance of signal loss so your speakers always deliver high-quality audio.
- EASY TO USE: Easy to use with built-in subwoofer crossover, remote turn on/off, and power on LED indicator.
- BUILT TO LAST: Thermal, overload, and short circuit protection circuitry protects the life of the amplifier.
Check StockPyramid PB717X Arctic Series 1000 Watt Powerful Performance 2 Channel Class AB Car Truck Vehicle Audio Mosfet Amplifier Power Amp (2 Pack)
- POWERFUL PERFORMANCE: Enhance your vehicle's current audio system with this 1000-watt powerful amplifier.
- MOSFET POWER SUPPLY: Features regulated pulse width modulated Mosfet power supply over a wide range of battery voltage.
- DISTORTION-FREE SOUND: Silver-plated RCA ports eliminate the chance of signal loss so your speakers always deliver high-quality audio.
- EASY TO USE: Easy to use with built-in subwoofer crossover, remote turn on/off, and power on LED indicator.
- BUILT TO LAST: Thermal, overload, and short circuit protection circuitry protects the life of the amplifier.
Check StockPyramid PB715X 1000 Watt MOSFET 2-Channel Car Audio Power Amplifier System with Soundstorm 8 Gauge Complete Car Audio RCA Wiring Installation Kit
- PACKAGE INCLUDES: 1 Pyramid PB715X 1000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm 8 gauge complete car audio RCA wiring installation kit.
- AMPLIFIER: The amplifier features a MAX power handling of 1000 watts and a RMS power handling of 500 watts at 4 Ohms. The MOSFET modulated power supply has a higher switching speed and includes a built in variable subwoofer crossover and variable gain control.
- WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
- DIMENSIONS: Dimensions: 7.28’ L x 9.45’ W x 2.09’ H.
- WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check StockPerformance Teknique ICBM-892 2 Channel Amplifier 1200W MAX
- Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check StockAudiotek AT4000M 1 Channel Monoblock Car Amplifier - 4000 Watts 2 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers
- 1 Channel Monoblock Car Amplifier - 4000 Watts | 2 Ohm Stable.
- Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
- Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
- Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
- Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check StockAudiotek AT1600M 1 Channel Monoblock Car Amplifier - 1600 Watts 2 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers
- 1 Channel Monoblock Car Amplifier - 1600 Watts | 2 Ohm Stable.
- Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
- Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
- Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
- Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check StockAudiotek AT5000S 2 Channel Stereo Car Amplifier - 5000 Watts 2 Ohm Stable LED Indicator Full Range Bass Knob Included Great for Speakers and Subwoofers
- 2 Channel Stereo Car Amplifier - 5000 Watts | 2 Ohm Stable.
- Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
- Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
- Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
- Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock
