Novation Peak Eight-Voice Polyphonic Desktop Synthesizer
- New Oxford Oscillators using two waveform generating techniques: Numerically-Controlled Oscillators and 17 digital wavetables.
- pre-filter and post-filter distortion per voice, plus global distortion.
- extensive modulation system, with 16-slot modulation matrix and 16 direct assignments controlled on the front panel.
- Three ADSR envelopes and two LFOs per voice, plus animate buttons for instant modulation switching.
- high-quality reverb, delay and chorus effects, and onboard arpeggiator.
- Cvl modulation input for integration with modular systems.
- Compact desktop module design with optional die-cast aluminum stand for positioning (not included). Novation now offers a 3-Year Warranty on this and all other Novation products..
Check StockRoland JD-08 Tabletop Sound Module Boutique Synthesizer – Compact, Lightweight, Modern with New Effects and Polyphonic Sequencer
- ASM Polytouch 37-note mid-sized semi-weighted keybed.
- 3 oscillators allow you to choose from a selection of 219 single cycle waveforms.
- Mutators allow you to modulate, bend and sculpt the sound in new (and old) ways.
- 2 filters that can be configured in series or parallel.
- Includes power supply, 8 x AA batteries not included.
Check StockJuried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)
- Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
- Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
- Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check StockRoland SYSTEM-1M PLUG-OUT Synthesizer Module
- Semi-modular synthesizer with PLUG-OUT capability16 Color-coded CV and Gate connections with LED lightingEurorack, table-top and 19 rack compatible using AC or Eurorack powerVersatile oscillators with six waveforms, Crossmod, Ring Mod, Sync and Color controlAll parameters controlled with high-resolution knobs and sliders with LED indicators-12 dB and -24 dB filter types with independent high-pass filtersIntegrated delay, reverb and crusher effectsRecord and playback all CV and Gate information w.
- 19 color-coded CV/Gate and audio connections with LED lighting.
- 84 HP Euro rack, tabletop and 19” rack compatible using AC adaptor or Euro rack power.
Check StockRME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter with AKG K240 Studio Pro Headphones & 10-Pack Straps Bundle
- ... the GUSTARD A26 can supports Roon /UPnP /HQ Player NAA at present, and there will be more protocols in the future..
- Clock Synthetization & XMOS XU216 Solution ▶️ Equipped with K2, ultra-low noise clock synthesizer, the A26 DAC features a precision clock from local oscillators or external clock in. It is worth mentioning that the GUSTARD A26 can replace the input signal' s clock with precision oscillators (local or external) and avoid the interference from the input source' s clock. In addition, the A26 DAC applies XU216 from XMOS, supporting up to PCM768 (with MQA-support) and DSD512..
- LPF Discrete Circuits Design ▶️ LPF is specifically designed for the AK4499EX using discrete devices, whose final parameters of the circuit are adjusted with subjective listening. Different from ICs, these discrete circuits provide the possibilities to control every detail in sound and performance. However, these parasitic effects would introduce huge challenges to development experience and device's quality..
- Full-Functional Remote Control ▶️ Except for its excellent configuration, GUSTARD A26 characterizes a sandblaste....
Check StockMoog Subsequent 37 Analog Synthesizer
- The OB-6 is a once-in-a-lifetime collaboration between two of the most influential synth designers in history — Dave Smith and Tom Oberheim.
- It’s an all-analog, 6-voice poly synth with voltage-controlled oscillators, a state-variable filter, and voltage-controlled amplifiers, inspired by Tom’s original SEM design — the bedrock of his legendary 4-voice and 8-voice synthesizers.
- Manufactured and sold by Dave Smith Instruments, the OB-6 features six discrete analog voices with two oscillators (plus sub oscillator) per voice, continuously variable waveshapes with triangle, sawtooth, and variable-width pulse waves, X-mod with 2 sources and 5 destination, a 64-step polyphonic step sequencer, dual digital effects that include faithful recreations of Tom’s acclaimed phase shifter and ring modulator, a full-featured arpeggiator, and a powerful, in-your-face, sonic signatur....
- This analog powerhouse is packed into a four-octave, semi-weighted keyboard with velocity and channel aftertouch, making it perfect for stage or studio.
Check StockKOOBOOK 1Set 1Hz-50MHz Frequency Counter Meter Crystal Oscillator Digital Tester Meter DIY Kit 5-Digital LED Display
- This is a PIC microcontroller based on the frequency meter, with a crystal measurement function and programmable addition and subtraction frequency settings..
- Five digital display, easy and intuitive, all use of in-line components, the circuit is simple and easy to produce..
- You need to solder and assemble by yourself, all the components are directly inserted, and the wire is printed correctly according to the PCB. After welding, the signal is input with the standard signal source, and the yellow adjustable capacitor is adjusted to make the display value equal to the signal frequency..
- The power supply can use a USB to 3.5mm power cable, or you can directly input a 5-9V DC power supply at the - and + pads..
- It can measure the frequency range from 1 Hz to 50 megahertz (1Hz-50MHz), can measure the oscillation frequency of most common crystal oscillators, and measure equipment such as radio transceivers..
Check StockJuried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)
- Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
- Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
- Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check StockTexas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)
- Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
- Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
- Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check StockGustard R26 Discrete R2R Decoder MQA Native DSD DAC with Streamer/Renderer PCM768K DSD512 XU216 K2 IIS Decoder(Silver)
- CPLD: Complex Programmable Logic Device:Signal routing.
- Clock synthesization: Replace the input signal' s clock with precision oscillators (local or external). Interference from the input source' s clock is avoided. Function off: IIs, AES, COAX, OPT, BT.
- PCM NOS, 1 Bit Function on: USB & LAN K2, ultra-low noise clock synthesizer: provides precision clock from local oscillators or external clock in..
- LPF is specifically designed for the D/A converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete circuits provide the possibilities to control every detail in sound and performance. But the parasitic effects introduced huge challenges to development experience and device' s quality..
Check StockGustard R26 Discrete R2R Decoder MQA Native DSD DAC with Streamer/Renderer PCM768K DSD512 XU216 K2 IIS Decoder(Black)
- CPLD: Complex Programmable Logic Device:Signal routing.
- Clock synthesization: Replace the input signal' s clock with precision oscillators (local or external). Interference from the input source' s clock is avoided. Function off: IIs, AES, COAX, OPT, BT.
- PCM NOS, 1 Bit Function on: USB & LAN K2, ultra-low noise clock synthesizer: provides precision clock from local oscillators or external clock in..
- LPF is specifically designed for the D/A converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete circuits provide the possibilities to control every detail in sound and performance. But the parasitic effects introduced huge challenges to development experience and device' s quality..
Check StockxDuoo XD-05 Plus Portable Desktop Headphone Amplifier 32bit/384kHZ DSD256 DAC Headphone Amplifier (Silver XD-05 Plus)
- ► Portable headphone amplifier: No matter where you are,you can enjoy the high quality music. Support USB/Coaxial/Optical/AUX IN, can be connected various multimedia devicesall digital in..
- ► Professional high performance chips: Adopts XMOS XU208 and AK4493EQ chips, work in asynchronous transfer mode, support up to 32bit/384kHz and DSD256 signal, present more musical details..
- ► Easy to drive lots of headphone: 1000mw output power(32ohms load), comparable to desktop headphone amplifier, easy to drive high impedance headphones..
- ► Powerful battery: Built-in 3.8V5000mah rechargeable li-polymer battery, long playback time. ≥13H( USB IN,≥21H( SPDIF IN,≥40H( AUX IN).
- ► Adopts two active Low Phase Noise Crystal Oscillators work with CPLD reduced Jitter to undetectable level. Use Dual interchangeable op amp, it could be replaced by yourself..
Check StockOCESTORE Crystal Oscillator Tester Frequency Counter Tester Meter 1Hz-50MHz Cymometer Measurement Tester Module LED DIY Kit
- 【OPTIMAL PERFORMANCE】OCESTORE premium upgrade Frequency Counter Tester Meter based on PICmicrocontroller that can measure frequency of 1 Hz to 50 MHz,designed to measure the oscillation frequency of the most crystal oscillators..
- 【HIGH QUALITY】OCESTORE premium Frequency Counter Tester Meter is made of high quality material which can use for a long time.Programmable addition and subtraction frequency settings, used to measure radio transceivers and other equipment..
- 【SUPER IMPORTATNT】with crystal oscillator measurement function and programmable addition and subtraction frequency settings, five-digit digital tube display, convenient and intuitive, all use in-line components, simple circuit, easy to make..
- 【OPTIMAL RELIABILITY】Power supply : USB 5V or DC 5-12V.
- Crystal Test Range: about 4MHz-48MHz.Automatic range conversion, no need for manual switching.
- All in-line components, easy to install and debug..
- 【PACKAGE & SERVICE】Package Include: 1 Pcs x Crystal Oscillator Frequency Counter .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock