Categories

Best Power Router Fences

MATCHFIT 1.5 Dovetail Track Hardware 4-Pack

  • Compatible with any ½” 14-degree dovetail Router bit.
  • One-of-a-kind hardware Moves through the dovetail tracks below the surface.
  • Create your own fences, stops, hold-downs, and assembly fixtures.
  • Compatible with the match fit dovetail Router bit.
  • Great for jigs that require greater force to secure a work piece.
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • What is a featherboard you might ask? Is it something I need for my workshop? Well the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most work shops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence your running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through..
  • The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
  • Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in....
Check Stock

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

  • ...ins consistent pressure across face of the feather board.
  • 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
  • Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
  • Includes sturdy spacer for tandem Feather Board operations.
  • Dual slide motion - Side to side and forward action for quick and easy setup.
  • Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - provides maximum hold.
  • Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
  • Includes sturdy spacer for tandem FeatherBoard operations.
  • Dual Slide Motion - Side to side and forward action for quick and easy setup.
  • Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - Provides maximum hold.
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

LANTRO JS T track Hold Down Clamps,Width Woodworking and Clamps, T Tracks Woodworking, 1Pack

  • Clamp anywhere with a dovetail groove. Featuring new soft-grip handle..
  • Unique clamp shape slides into dovetail wood tracks and grooves for fast and easy clamping.
  • Universally compatible with any 1/2" 14-degree dovetail router bit profile.
  • Eliminate the need for expensive T-tracks and groove your own tracks.
  • Work smarter and build taller table saw fences, straight line sleds, and 100s of new clamping jigs.
  • Compatible with 3/4" x 3/4" dog holes for quick hold-downs.
  • Note: Dovetail Router Bit is not included..
Check Stock

Fence Backer Boards By Peachtree Woodworking - PW1093

  • MDF Fence makes great fences for router table & other too.
  • Make you own brackets or use our aluminum fence blank (Sold Separately).
  • 2- 16" x 4" MDF Fence Plates with Mini-T-Track installed front & back.
  • 4 Knobs & 4 ea 1/4" hex head bolts for installation.
Check Stock

DepthGauge

  • Self-standing durable frame with wide base feet allows the tool to be self-standing for setting the cutting depth on routers, router tables, tables saws, and more.
  • Measure, mark and locate blades, bits, and fences.
  • Brass thumb knob allows you to accurately tighten your measurement ruler.
  • Metal ruler measures are shown in inches and millimeters.
  • Easy view window designed for accurate setting and measuring.
Check Stock

POWERTEC 71070 Hex Bolt Knob Kits Suitable for Use with 1/4 and Universal T-Track Pack of 4 kits 12 Total Pieces

  • INCLUDES: 4 knob kits including 4 of five star Thru Hole knobs, 4 of ¼" washers, 4 of ¼"-20 all thread hex head bolts three inches long..
  • FUNCTION: Ideal for replacement knobs for your t-track assemblies, jig and fixture hardware and other general purpose applications that accept....
  • CONVENIENT: Perfect tool-less female knob makes for a great replacement fastener or an alternative to similar sized handles, t-style knobs and....
  • APPLICATIONS: Also perfect for router bit guards, stop blocks, miter gauge fences, feather boards, router tables, drill press, and other workshop....
  • PREMIUM DESIGN: 5 Star Knob features a black, thermoplastic construction with an easy-to-grip, smooth matte black finish and a top-side thru hole to....
Check Stock

iGaging Setup Block Bar Gauge Precision Aluminum 15 piece for Woodworking

  • Accurate Quick Easy Setup of Blades Bits and Fences.
  • 15 Blocks Solid Aluminum Construction Blue Anodized to prevent damage to router bits and saws.
  • Sizes(Inch): 1/16, 3/32, 1/8 ,5/32 ,3/16 ,7/32 ,1/4 ,5/16 ,3/8 ,7/16, 15/32, 1/2, 23/32, 3/4, 1x2x3.
  • Combine bars to setup 100's of measurments.
  • Easy-to-read laser etched labels on each block. Fitted padded case included..
Check Stock

Power Cord Storage Box Router Shielding Box Plug-in Set-top Junction Box

  • Fence clamp attaches to Stay Put Hose Mounting Bracket.
  • Allowing attachment to most any flat surface.
  • Available in two sizes according to jaw pad to end of clamp.
  • Also used to secure sacrificial tablesawn fences and router fence stop blocks..
Check Stock