Best Power Steering Hose Clamp

ICT Billet Power Steering Hose Compression Coupler for LS Swap Custom Hose 551856

Great for modifying factory GM power steering hose.
Remove all those unnecessary bends in your factory hose.
Great for LS engine swaps or turbo setups where space is at a premium.

Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

Suburban Gray

TEMPERATURE RESISTANT MATERIALS: Each hose in the Edelmann Elite line features innovative heat/abrasion tubing and is specifically designed to withstand a range of temperatures from polar vortex cold to extreme heat waves.
PREMIUM GRADE POWER STEERING EQUIPMENT: Designed to stand up to extreme conditions and rigorous daily wear, our power steering hoses absorb vibrations while reducing noise for quiet yet powerful performance.
RUST RESISTANT TUBES: Our high performance hoses have a durable zinc coating that helps prevent rust and corrosion damage.
Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity.
COMPATIBLE WITH: This hose fits various makes and models of 2013-07 GM Avalanche, Escalade, Sierra, Silverado 1500, Suburban, Yukon, Tahoe Vehicles. See the full list of vehicles below..
TRUSTED BY PROFESSIONALS: Plews & Edelmann is a leading designer, manufacturer and distributor of automotive parts, accessories, and tools sold to retail auto parts stores and industrial distribution outlets, worldwide.

Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

【Flexible hose pliers with long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.

Check Stock

Hose Clamp Pliers Set, 9pcs Wire Long Reach Hose Clamp Pliers Set for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps, Clamp Removal Tool by BOOTOP PIN

9PCS Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps.
Hose Clamp Pliers For replacement of fuel, oil, and water hose.
Hose Clamp Tool Pliers for the removal and locking of clamps into open position..
Universal Hose Pliers Set Includes long-reach cabled hose clamp pliers(Flexible Hose Clamp Pliers), Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
Locking Design: The 5 spring-clamp pliers are capable of locking in place to free your hands and speed up your repair work. Long reach hose clamp plier with wire flexible wire shaft convenient for working hidden areas and long distance. Perfect Fit: Having purpose-built tools will eliminate time-consuming work arounds and jerry rigging, making your hose work a breeze. This hose clamp tool box set works with plastic and metal hose clamps from 11/16 inch to 2 1/2 inches..
Automotive hose clamp pliers set may also know as hose clamp tool, hose clamp tool pliers,....

Check Stock

Power Steering Hose Connector (Suction Hose Outlet to P/S Pump Inlet) - Compatible with 2005-2010 Honda Odyssey

Suction hose outlet to power steering pump inlet..
Compatible with or fits: 2005 - 2010 Honda Odyssey.
The o-ring at the pump inlet is serviced separately, not included.

Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

... Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
[Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
[Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
Place 1/2-inch ratchet wrench on winding mandrel.
Bend band back over boot and onto clip to apply tension and cut.
Fold remaining band tail into clip and secure by tapping down clip ears.
[Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
[Built To Last]: Constructed from zinc-plated alloy steel.
Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band securely until clamped.

Check Stock

6 Pack Hose Clamp Pliers Set Hose Pinch Tool Brake Line Pinch Pliers Fuel Line Clamps for Brake Hoses, Radiator Hoses, Coolant Hoses, Gas Lines (Red)

【3 SIZE TO SELECT】A set of 3 size sold, which is Large size: 9-15/16" x 3/4" x 2-1/8"；Medium: 7-3/16" x 3/4" x 1-7/8"；Small: 6-1/8" x 5/8" x 1-5/8"，2 set of hose pinching pliers. This is an essential tool for most practical size satisfy daily repair..
【NON-DAMAGING JAWS】Made of hard and safe nylon material, corrosion resistant and rust-resistant, non-conductive and security. Rounded jaw edges mean not damage your sensitive auto parts..
【MULTIPLE USAGE】Great for use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines, power steering repair, water pump repair..
【SUPER LABOR-SAVING】 Light weight design so you could simple and freely one hand hold hose clamping tools. Non slip dipped handles, less labor..
【LOCKING IN PLACE】Each radiator clamp removal tool includes a slider can lock into position leaving your hands free to repair..

Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
Plier works on steering gear gaiters and fuel hoses on various brands of cars.
Can be used for working on Oetiker System hose clamps.
◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
We recommend double-wrapped band for added strength.
◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....

Check Stock

OTC 4496 Stinger Hose Clamp Pliers Set - 6 Piece Plus Storage Case

OTC's Hose Clamp Pliers Set features five different styles of hose clamp pliers and a hose removal tool.
Included tools will service most flat-band and ring-style hose clamps.
Pliers included are: flat-type hose clamp pliers, offset hose clamp pliers, 45 degree hose clamp pliers, and a set of straight hose clamp pliers.
Rugged blow-molded plastic storage case keeps tools contained and organized so they are ready when you are.

Check Stock

Edelmann Elite 92124E Power Steering Pressure Hose - Car Accessories and Equipment, For 2008-04 Ford F150; 08-06 Lincoln Mark LT; V-8 5 4L Vehicles

TEMPERATURE RESISTANT MATERIALS: Each hose in the Edelmann Elite line features innovative heat/abrasion tubing and is specifically designed to withstand a range of temperatures from polar vortex cold to extreme heat waves.
PREMIUM GRADE POWER STEERING EQUIPMENT: Designed to stand up to extreme conditions and rigorous daily wear, our power steering hoses absorb vibrations while reducing noise for quiet yet powerful performance.
RUST RESISTANT TUBES: Our high performance hoses have a durable zinc coating that helps prevent rust and corrosion damage.
Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity.
COMPATIBLE WITH: This hose fits various makes and models of 2008-04 Ford F150.
V-8 5 4L Vehicles See the full list of vehicles below.
TRUSTED BY PROFESSIONALS: Plews & Edelmann is a leading designer, manufacturer and distributor of automotive parts, accessories, and tools sold to retail auto parts stores and industrial distribution outlets, worldwide.

Check Stock

Edelmann Elite 80617E Power Steering Pressure Hose - Car Accessories and Equipment, For Various 2013-07 GM Avalanche, Escalade, Sierra, Silverado 1500, Suburban, Yukon, Tahoe Vehicles

TEMPERATURE RESISTANT MATERIALS: Each hose in the Edelmann Elite line features innovative heat/abrasion tubing and is specifically designed to withstand a range of temperatures from polar vortex cold to extreme heat waves.
PREMIUM GRADE POWER STEERING EQUIPMENT: Designed to stand up to extreme conditions and rigorous daily wear, our power steering hoses absorb vibrations while reducing noise for quiet yet powerful performance.
RUST RESISTANT TUBES: Our high performance hoses have a durable zinc coating that helps prevent rust and corrosion damage.
Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity.
COMPATIBLE WITH: This hose fits various makes and models of 2013-07 GM Avalanche, Escalade, Sierra, Silverado 1500, Suburban, Yukon, Tahoe Vehicles. See the full list of vehicles below..
TRUSTED BY PROFESSIONALS: Plews & Edelmann is a leading designer, manufacturer and distributor of automotive parts, accessories, and tools sold to retail auto parts stores and industrial distribution outlets, worldwide.

Check Stock