Categories

Best Power Tool Switch

Rockler Safety Power Tool Switch - Heavy-duty 15 Amp Power Switch - Stop Paddle to Quickly Shut off Power - Safety Switch for Router Tables or Workbench - Router Table Accessories

  • Rockler Router Table Switch: Just bump the "Stop Paddle" on/off switch, which is easy to find when you're in a tight spot, to quickly shut off power.....
  • “Stop Paddle” Table Saw Switch: This Rockler power tool switch mounts to Rockler steel shop stands or any other surface with screws. No more....
  • Hands-Free: This power tool safety switch helps you keep your hands on your work piece and not removing to hit a power off button. This stop button....
  • Easy To Locate: Locate our router switch near your hip or knee and you'll never have to take your hands off the work piece. The Rockler router....
  • Easy To Install: Several minutes tops that's all it takes. The start and stop router power switch is installed with the help of screws and can be....
Check Stock

POWERTEC 71390 Safety Paddle Switch - Dual Voltage 110/ 220v Smart Switch for Table Saw and Power Tool Safe Guard

  • INCLUDES: (1) Safety Power Tool Switch (The four prongs connect to ¼” tab female quick -disconnect wire terminals).
  • FUNCTION: Paddle switch provides enhanced workshop and power tool safety – works as the perfect power tool safety switch replacement that’s compatible with an assortment of table saws, drill press, disc sanders and other equipment.
  • FEATURES: Removable safety lock out key and an over-sized paddle for convenience and emergency stop placement to eliminate panicking and searching for the off-button.
  • RATINGS: Dual Voltage: 110V/220V | Rated current: 20 amps at 125V, 12 amps at 250V.
  • EASY TO USE: Made with a simple and straightforward plug-and-play design for a quick and easy installation – perfect for craftsman and woodworkers of all skill levels.
Check Stock

Metabo HPT G3612DBQ6 36V MultiVolt Cordless 4-1/2-Inch Grinder w/ 36V MV Hammer Drill Kit

  • MULTIVOLT: This tool can be run on both 36 Volt battery or AC power cord.
  • MOTOR: Features brushless motor technology for more runtime, increased power and extended durability.
  • SWITCH: Paddle switch that turns off the tool when released for added safety.
  • INCLUDES: Hammer drill, (2) 36V batteries, rapid charger with USB, side handle, #2 Phillips Bit, and carrying case.
  • MULTIVOLT: Can be run on a battery or power cord (one tool replaces two tools).
  • POWER: 1,220 in-lbs of torque and up to 2,100 RPM with 0-31,500 beats per minute.
Check Stock

DEWALT Rotary Saw 1/8-Inch and 1/4-Inch Collets 5-Amp DW660

  • DEWALT rotary tool features tool-free bit change for fast and easy bit changing without a wrench.
  • Turn-on/Bump-off switch of DEWALT cut out tool allows user to easily shut tool off.
  • 5.0 amp, 30,000 rpm motor provides more cutting power.
  • Slim body design and ergonomic for less fatigue over prolonged use.
  • Dust-Sealed Switch protects against dust ingestion for longer switch life.
Check Stock

POWERTEC 71353 Safety Toggle Switch – Dual Voltage 125/250v Premium Power Tool On Off Switches Series

  • FUNCTION: Provides enhanced workshop and power tool safety and features a paddle with a toggle switch that allows you to quickly shut down the power to your machines to help prevent accidents.
  • VERSATILE: Works effectively as the perfect power tool on off switch replacement that’s compatible with an assortment of table and band saws, router tables, disc sanders, drill press, dust collectors and other equipment.
  • RATINGS: Dual Voltage: 125/250V | Rated Amperage: 20 at 125V, 12 at 250V.
  • EASY TO USE: Made with a straightforward switch housing and design (2 or 4 wire install) for a quick and easy installation without the need for extensive electrical or wiring knowledge – ideal for craftsman and woodworkers of all experience levels.
Check Stock

Kobalt 5-in 24-Volt Max-Volt Cordless Angle Grinder

  • Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
  • Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
  • Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
  • Lock on/off feature for continuous operation.
  • AC/DC switch for use with alternative power source.
  • Protective zig zig varnish seals the armature from dust and debris for longer tool life.
  • Extra large paddle switch for comfortable operation.
  • Thicker coil wires are wound more closely to reduce heat and energy loss.
  • All ball bearing design and metal gear housing for durability.
  • (1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
  • (5) 4 1/2 inches 24 Grit Grinding Wheels.
Check Stock

Makita 9557PBX1 4-1/2\ Paddle Switch Cut-Off/Angle Grinder

  • Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
  • Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
  • Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
  • Lock on/off feature for continuous operation.
  • AC/DC switch for use with alternative power source.
  • Protective zig zig varnish seals the armature from dust and debris for longer tool life.
  • Extra large paddle switch for comfortable operation.
  • Thicker coil wires are wound more closely to reduce heat and energy loss.
  • All ball bearing design and metal gear housing for durability.
  • (1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
  • (5) 4 1/2 inches 24 Grit Grinding Wheels.
Check Stock

Automatic Vacuum Switch for Power Tools Ortis Dust Control Autoswitch Delay Vacuum On/Off to Prevent Circuit Overload and Tripping Monitor Power Parameters Adjustable Actuation Threshold

  • 【Upgraded Automatic Vacuum Switch】: The automatic vacuum switch features unique current sensing technology, which can turn the vacuum on....
  • 【Shutoff Delay】: In addition to automatically turn on your tool and vacuum cleaner, the automatic switch can also delay turn off the vacuum by 7....
  • 【New Updated Design】: The automatic sawdust vacuum switch features matte surface and curved edge design, which is textured and has nice touch....
  • 【Wide Application】: The actuaion threshold of vacuum autoswitch is approximately 0.25 amps (27.5 watts at 110V, 30 watts at 120V), ideal switch....
  • 【Safe To Use】: The automatic power tool switch is made of high-quality material, adopt UL-certified 14AWG power cord and quality ABS plastic case,....
Check Stock

DCT Foot Operated On Off Switch Foot Pedal Switch - 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch

  • POWER CONTROL FOOT SWITCH: Use the DCT Electric Foot Switch Pedal to activate your woodworking tools, power tools, printing tools, sewing machines, tattoo guns, textile tools, and other crafting tools while keeping your hands free.
  • HANDS-FREE OPERATION: Improve safety and control by using this hands-free electric foot pedal switch on off foot switch.
  • Easily start and stop power tools with this foot activated on off switch.
  • Provides continuous power until turned off.
  • COMPATIBLE WITH YOUR POWER TOOLS: Works with your router, sander, drill press, wood lathe, meat grinder, or other 15 amp power tools and machines (not included).
  • Compatible with variable speed equipment (15 amp foot switch does not allow for speed control).
  • EASY TO USE: Plug the attached 3 prong power cord into a 115 volt grounded outlet, then plug your tool into the 3-prong receptacle on the base of the foot control on off switch.
  • Push the electric pedal forward for power output, then push again to shut off the power.
  • DURABLE CONSTRUCTION: Plastic texturized pedal top provides maximum durability and foot grip, while the 4-foot (1.2m) long power cord allows for versatile use anywhere.
  • 6 x 3.5 inch (15.2 x 8.9cm) tattoo foot pedal electric switch tapers in height from 1.25 to 2.75 inch (3....
Check Stock

Milwaukee 2680-20 M18 18V Lithium Ion 4 1/2 Inch Cordless Grinder with Burst Resistant Guard and Paddle Switch Design

  • PADDLE SWITCH: You can activate this grinder easily, even when you’re wearing thick work gloves, thanks to the paddle switch design.
  • DEBRIS BAFFLES: An “L” shape molding near the grinding wheel picks up debris and prevents it from clogging up the tool’s internal components.
  • TOOL-FREE GUARD: The guard is easily adjustable. All it takes is the push of a button, and you can have the guard adjusted for a variety of cutting applications at different angles.
  • 3-POSITION SIDE HANDLE: Work with maximum stability with the help of the plastic handle, included in this kit.
  • M18 COMPATIBLE: This Milwaukee power tool works with M18 18v lithium ion Milwaukee batteries. Compatible models include the 48-11-1860, 48-11-1850, 48-11-1828, and 48-11-1815, 48-11-1840, 48-11-1820.
  • 4-pole motor delivers maximum power when cutting or grinding.
  • Overload protection prevents damage to the tool and battery in abusive situations.
  • L-shape vents keep debris from entering the tool and damaging internal components.
  • Tool free, burst resistant guard allows for quick, easy guard adjustments.
Check Stock

LVCHEN Lab Vibrator Equipment Roundness Vibrator Oscillator Shaker 4

  • [Best Tools] - Dental vibrator is a big power, high efficiency vibrator,Quiet, powerful, and highly durable, this is the perfect tool for anyone!.
  • [Superior quality] - The plaster shaker vibrates is entirely made of metal.The unique design of heat radiation base make it always work in long time..
  • [The strength is adjustable] - Gypsum Mixing Machine has two grades, weak grade, strong grade, can be changed as necessary..
  • [How to use] - Before power on, put the switch in the middle part , and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work..
  • [Application] - Great power, high efficiency vibrator, and highly durable, a great choice for dentist, baker, sculptor..
Check Stock

Accusize Industrial Tools 1/8\ Miniature Precision Air Die Grinder, AT00-3170

  • Angle grinder gets up to 54% more power when paired with FLEXVOLT batteries.
  • Kickback Brake of DEWALT angle grinder engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs..
  • E-CLUTCH shuts down the motor of DEWALT angle grinder in under a tenth of a second when a pinch/stall is detected.
  • Compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries.
  • E-Switch Protection requires the trigger switch to be cycled (turned off and on) in the event of a power outage or other unexpected shutdowns to restart.
  • Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
Check Stock

Ingersoll Rand W7152-K22 20V 1/2

  • POWER:Powerful brushless motor and impact mechanism are finely tuned for best in class power-to-weight ratio..
  • CONTROL:Includes theIQV Power Control System with 4 modes: Full Power, Half Power, Wrench Tight, and Hand Tight. From axle nuts to oil pans, flange bolts to pre-torque joints theres no need to switch tools..
  • DURABLE:Patented steel reinforced frame and impact-and-chemical resistant housing protects the W7152 from every day abuse. The IQV brushless motor delivers more power and efficiency than a brushed motor, providing longer tool life..
  • ACCESS:8.1 short tip-to-tail design and 360 shadowless task light provides increased visibility and access..
  • Tuned impact mechanism with 1500 ft-lb nut-busting torque and 1000 ft-lb of MAX torque.
  • Robust and durable all-metal drivetrain and hammer mechanism optimized for maximum power and efficiency.
  • Variable-speed switch (half and full power only) with electronic brake provides maximum control of the tool and increases safetyrelease trigger, drive stops spinning.
  • 4 dimmable settings on the shadowless 360 LED light ring.
  • Tough composite housing and patented steel-reinforced frame protects against aggressive fluids, chemicals and repeated drops.
  • Ideally used for removing or fastening cradle bolts tire changing, fleet t....
Check Stock