uxcell Shaft Coupling 12.7mm to 12.7mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Shaft Usage: 12.7mm to 12.7mm/0.5 inch to 0.5 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

uxcell 5mm to 6.35mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

Performance Tool W83149 Universal A/C & Fuel Line Disconnect Set

  • Easily disconnects air conditioning lines and quick connect fuel lines.
  • Set contains six release tools that disengages the spring lock coupling on Ford and Chrysler air conditioning lines.
  • Disengages the spring lock coupling on gm, Ford, and Chrysler fuel lines.
  • 5/16 inch disengages the spring lock coupling on Ford radiator and transmission lines..
  • Includes the following sizes: 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch..
Check Stock

uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

Befenybay 2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling D25 L30 5x8mm Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor(5x8mm)

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

VEVOR CNC Machine 4 Axis CNC Router 3040 CNC Router Engraver Machine 500W CNC Router Engraving Drilling Milling Machine MACH3 with Usb Port for DIY Artwork Cutter 4 Axis,3040,500W

  • 【SPECIFIC PARAMETERS】- Working Area: 300x400x55mm (11.8"*7.9"*2.2") Work table dimension 610*450*390mm (24.0"*17.7"*15.4"), Total Power: 500W, Spindle Motor Power:300W DC Spindle Motor.
  • 【DURABLE QUALITY】- Equipped with an aluminum backing plate, this CNC machine is more steady and solid. The chrome shafts are not easy to deform, designed aluminum dust-proof plate for easy cleaning, and suitable for long time use..
  • 【STRONG COMPATIBILITY】- Can be controlled by computer for more precise engraving control. Replace the traditional parallel Interface with USB, suitable for desktop and laptop computers. And compatible with more operating systems(WINDOWS 2000 / XP, WIN7, WIN8, WIN10)..
  • 【HIGH TORQUE TRANSMISSION】- Flexible coupling can be used for high torque transmission. Cover plates greatly reduce the pollution for the screws and shafts. Spindle motor knob can be useful for small positioning adjustment, providing precise engraving..
  • 【MULTIPLE APPLICATION】- Engraving Machine is perfect for the engraving of soft materials such as plastic, wood, acrylic, PVC, PCB, MDF board, advertising signs, etc..
Check Stock

Ruland OD21/33-AT Oldham Coupling Disk, Black Acetal, Bore, 1-5/16\ or 33.3mm OD

  • Ruland oldham couplings have a zero-backlash balanced design for reduced vibration at speeds up to 4,500 RPM. They can accommodate high amounts of parallel misalignment (up to 10% of the hub OD)..
  • Acts as a mechanical fuse stopping power transmission during a torque overload. User can combine clamp or set screw hub with inch, metric, keyed, or keyless bore for a high level of customization..
  • Made from acetal for higher torque and torsional stiffness capabilities than nylon..
  • Proprietary hub machining process for smooth interaction between the hub and disk allowing for significantly longer life..
  • Ruland oldham coupling disks are RoHS3 and REACH compliant.
Check Stock

MAYITOP Washer Machine Motor insurance Coupling 285753A For Whirlpool Kenmore Crosley AP3963893, PS1485646, 285753A Heavy Duty Coupling

  • MAYITOP Washer Machine Motor insurance Coupling 285753A For Whirlpool Kenmore Crosley AP3963893, PS1485646, 285753A Heavy Duty Coupling.
  • A perfect aftermarket replacement for you. Re-enforced with metal sleeves. The coupler is located between motor and transmission. Replaces all previous versions..
  • Fits ALL Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper direct drive washers (no belt). (The Compatibility Is Just For Reference. Please Compare The Part Number With Your Original One Before Purchasing!.
Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
  • 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
  • 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
  • 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
  • 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material:Universal joint shaft coupling is made of nickel-coated iron,much stronger, wearproof, Long service life。.
  • Dimensions:Inner Diameter: 4mm to 6mm,Outer Diameter: 11mm/0.43”;Height: 24mm/0.94”。.
  • Package Include:4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots,It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock

Axe Cutting Wood with Impact Version 4

  • Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x 100 mm working area also contributes to an excellent cutting and milling performance..
  • Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and improve accuracy. Help you achieve higher performance and better control..
  • Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle manually. You can also connect it to a computer via the USB interface, implementing more steps..
  • Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a cooling effect. Besides, it also features hard-wearing and never rust, prolonging life service..
  • Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft aluminum, acrylics, PVC, PCB, etc..
Check Stock

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

  • ...s, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
  • at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
  • Compatible universal USBCAN device.Single channel maximum reception capacity more than 14000 frames per second, the highest transmission capacity of 3000 frames per second,Do not crash, do not lose frame.Dual channel at the same time when receiving the highest reception capacity of 8500 frames per second.Support CAN relay function, realize the 2 CAN channel data at different baud rate under transparent transmission..
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock