Categories

Best Powerspec 65watt 8plus Gold

Boss Audio 12 1400W Car Audio Subwoofer & 1500W Mono Class A/B Amplifier with 8 Gauge Wiring Kit & QPower Single 12 Vented Subwoofer Enclosure Box

  • PACKAGE INCLUDES: Boss Audio 1400-watt subwoofer, 1500-watt amplifier with a remote and 8 gauge installation wiring kit, and a Q-Power subwoofer....
  • 1500-WATT MONO AMPLIFIER: Monoblock, Class A/B, MOSFET Power Supply.
  • RMS Power: 563 watts x 1 channel @ 4 ohms.
  • 8-GAUGE WIRING KIT: 20 ft. 8 Gauge Red power cable.
  • 12-INCH SUBWOOFER ENCLOSURE: 5/8-inch MDF construction.
Check Stock

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
  • Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.
Check Stock

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

  • ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
  • Designed for many common types of 3D printers, solid aluminium construction with aperture..
  • ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
  • ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
  • ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.
Check Stock

PowerSpec 650 Watt 80 Plus Bronze Semi Modular ATX Power Supply with RGB Lighting Fan Active PFC SLI Crossfire Ready Gaming PC PSU Computer Switching Power Supply PS 650BSM RGB

  • STABILITY: This PSU features 650 Watts of output power, active PFC design with single +12V output rail providing strong and stable power to computers.....
  • UL & 80+ BRONZE CERTIFIED: The PowerSpec semi-modular power supply has an 80 Plus Bronze and UL certification. 80+ Bronze boasts an 85% minimum....
  • QUIET & COOL: 135mm diameter RGB Fan efficiently cools. This solves potential thermal and noise problems for your computer power supply. Multi-Colored....
  • MAXIMUM SAFETY: Universal AC 115-230V /10Ainput with 50-60Hz frequency for wide-ranging use, protect your components and data from unexpected unstable....
  • DURABLE AND RELIABLE: These premium Japanese capacitors ensure a longer lifespan and eliminate explosion & electrolyte leakage issues. Purchase this....
Check Stock

Photive 60 Watt 6 Port Fast USB Desktop Charging Station Intelligent USB Wall Charger with Smart Charge Technology

  • Smart Charging Station- Industry first fast 6 port 60 Watt 12 Amp Rapid USB Wall charger. This 60 watt multi charger has revolutionized charging - Our....
  • Rapid Charger Dock - Charge your power hungry devices at home or office full speed with 60 watts and 12A total output. Perfect for International....
  • Overcharge protection – Charges safe, without risk of overheating or damaging devices.
  • Charge almost any USB device- Works Flawlessly with and iPhone 5 6 6S 7 7Plus 8 8Plus iPhone X, as well as All Android and Tablets, cell phones, and....
  • Perfect for International Travel- AC 110-220V input voltage. Please use recommended manufacturer usb cables.
Check Stock

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • 100% Brand New and All parts are tested and quality controlled prior to shipment..
  • Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..
Check Stock

Inland Premium 512GB NVMe SSD Bundle with PowerSpec 650W PC Power Supply M.2 2280 PCIe Gen 3.0x4 3D NAND Internal Solid State Drive Combo with Semi Modular ATX PSU 80PLUS Bronze Certified 135mm Fan

  • NVMe SSD and Computer Power Supply Gaming Bundle, meeting your needs of high speed and stable power supply at great energy efficiency when gaming.....
  • Component 1: Inland Premium 512GB M.2 2280 SSD, PCIe NVMe 3.0 x4 3D NAND internal solid state drive, high Speed read/write speed up to 3100MB/s and....
  • Component 1: No overheat and quiet when working compares to HDD. Tiny M.2 form factor with no moving parts inside, make it widely compatible,....
  • Component 2: PowerSpec 650 Watt Semi-Modular ATX Power Supply with 135mm RGB Lighting Fan. Certified 80 Plus Bronze power efficiency. Active PFC with....
  • Component 2: High-quality components ensure long-lasting durability and reliability. Great ventilation avoids potential thermal and noise problems.....
Check Stock

Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp

  • Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Waterproof Micro Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker etc). 2 Ohms: 400 Watts (2 x 200 Watts) . 4 Ohms: 250 Watts (2 x 125 Watts) . Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):. Peak 2 Ohms: 1600 Watts (800 x 2 Watts)..
  • Built in Bluetooth Wireless with Auto Pairing (You can run this amp without any receiver). IP65 waterproof rating. All inputs and wire wiring is sealed and covered. Conformal coated circuit board. Anti rust materials. This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine. Efficiency at Full Power 4 Ohm (1kHz) 84.8% ..
  • Efficiency at Full Power 2 Ohm (1kHz) 77.8%. Micro Size amplifier can easily fit in tight spaces. Digital Class D Audio Topology . Distortion(THD): ≤0.5% . Full Range/Low Pass/High Pass Configurable . High Input (Speaker level Input) . Low Pass Crossover: 32Hz-320Hz . High Pass Crossover: 32Hz-320Hz . Waterproof sheath RCA Input . Frequency Response: 20Hz-22KHz ..
  • Signal to Noise Ratio: (1 Watt into 4 Ohms) ≥8....
Check Stock

AFTRYOUGO Battery Case for iPhone 6 Plus, 6s 7 8 Plus(5.5”), 7200mAh Charging Extended Pack Protective Charger Plus Plus-Black, Black Pro (Model:XDL-640MW)

  • LONG BATTERY LIFE: iPhone 6sPlus/6Plus/7Plus/8Plus battery case 7200mah provides extra 17 hours talktime, 60 hours music time and 13 hours video time, only fits well for iPhone 6sPlus/6Plus/7Plus/8Plus(5.5 inch)（NOT works on iPhone 6/6s/7/8）..
  • SYNC&CHARGING: iPhone 6sPlus/6Plus/7Plus/8Plus battery pack supports syncing data to Macbook, PC or laptop and charging your phone simultaneously without removing it.
  • Just slide your phone into the battery cases, press the ON button for 3 seconds on the back bottom of the charging case to charge your iPhone 6sPlus/6Plus/7Plus/8Plus..
  • 360Deg’ PROTECTION: 1). The iPhone 6s+/ 6+/ 7+/ 8+ battery cover is not only a portable charging case, but also a 360Deg’ protective case for cellphone from scratches and other daily wear and tear.(Not include phone screen)2). Internal high quality chips also protect your iPhone 6sPlus/6Plus/7Plus/8Plus from overheating, short-circuiting and over charging..
  • PLEASE NOTES: ①For iPhone 6sPlus/6Plus, Compatible with traditional 3.5mm lighting headphones or wireless Bluetooth headphones to listen to music. ②For iPhone 7Plus/8Plus, ONLY works with Apple Airpods or other wireless Bluetooth headphone. Not compatible with iPhone lightning headphone or traditional 3.5mm headphones. T....
Check Stock

Urbanest Peterson Set of 3 Table and Floor Lamps, Gold with Off White Linen Shades

  • Urbanest set of 3 lamps with 2 table lamps and 1 floor lamp in a gold finish with off white linen shades..
  • The floor lamp measures 58 1/2" tall with a 10" diameter base. Clear cord measures 65" long. On/off switch on neck. Maximum recommended wattage is 100 watt standard bulb..
  • The table lamps each measure 25 1/2" tall, with a 6 1/2" diameter base. Clear cord measures 46" long. On/off switch on neck. Maximum recommended wattage is 60 watt standard bulb..
  • Uno-fitter shade for floor lamp measures 10" across the top, 14" across the bottom, and 10" slant height. Uno-fitter shades for table lamps measure 10" across the top, 13" across the bottom, and 10" slant height..
Check Stock

NENRENT True Wireless Battery Case for iPhone 8/iPhone SE(2022) 5000mAh Charging Protective Case Rechargeable Extended Battery Pack Case for iPhone 8/iPhone SE(2022) Backup Power Bank (4.7')-Black

  • ※【LONG BATTERY LIFE】※ iPhone 6sPlus/6Plus/7Plus/8Plus battery case 8500mah provides extra 17 hours talktime, 60 hours music time and 13 hours video time, only fits well for iPhone 6sPlus/6Plus/7Plus/8Plus(5.5 inch)（★NOT works on iPhone 6/6s/7/8★）..
  • ※【SYNC&CHARGING】※ iPhone 6sPlus/6Plus/7Plus/8Plus battery pack supports syncing data to Macbook, PC or laptop and charging your phone simultaneously without removing it.
  • Just slide your phone into the battery cases, press the ON button for 3 seconds on the back bottom of the charging case to charge your iPhone 6sPlus/6Plus/7Plus/8Plus..
  • ※【360° PROTECTION】※ ① The iPhone 6s+/ 6+/ 7+/ 8+ battery cover is not only a portable charging case, but also a 360° protective case for cellphone from scratches and other daily wear and tear.(Not include phone screen)② Internal high quality chips also protect your iPhone 6sPlus/6Plus/7Plus/8Plus from overheating, short-circuiting and over charging..
  • ※【PLEASE NOTES】※ ①For iPhone 6sPlus/6Plus, Compatible with traditional 3.5mm lighting headphones or wireless Bluetooth headphones to listen to music. ②For iPhone 7Plus/8Plus, ONLY works with Apple Airpods or other wireless Bluetooth headphone. Not compatible with iPhone lightning he....
Check Stock

GE Refresh 6-Pack 65 W Equivalent Dimmable Daylight Br30 LED Light Fixture Light Bulb 3X Life

  • GE Lighting BR30 Indoor LED Floodlight Bulbs, 10-Watt, Energy Smart, Soft White Finish, Dimmable, 65-Watt Replacement, 700 Lumens, Medium Base, 2-Pack.
  • Upgrade your indoor floodlight with money and energy saving GE LED light bulbs. These light bulbs are the easiest way to update your hard-to-reach....
  • GE indoor LED floodlight bulbs use only 10-Watts of energy and are an ideal replacement for standard 65-Watt LED floodlight bulbs..
  • Compared to standard incandescent 65-Watt floodlight bulbs, GE LED indoor floodlights bulbs will save you $90 in energy costs over the bulb's life..
  • Based on 3-hour daily usage, GE indoor LED floodlights are long lasting and energy efficient and are rated to last over 13 years thus extending the....
Check Stock

Gladgogo Battery Case for iPhone 8 Plus / 7 Plus / 6s Plus / 6 Plus Charging Case (6500mAh) Rechargeable Extended Battery Charger Case for iPhone 8 Plus / 7 Plus / 6s Plus / 6 Plus Pink - 5.5 inch

  • ※【LONG BATTERY LIFE】※ iPhone 6sPlus/6Plus/7Plus/8Plus battery case 8500mah provides extra 17 hours talktime, 60 hours music time and 13 hours video time, only fits well for iPhone 6sPlus/6Plus/7Plus/8Plus(5.5 inch)（★NOT works on iPhone 6/6s/7/8★）..
  • ※【SYNC&CHARGING】※ iPhone 6sPlus/6Plus/7Plus/8Plus battery pack supports syncing data to Macbook, PC or laptop and charging your phone simultaneously without removing it.
  • Just slide your phone into the battery cases, press the ON button for 3 seconds on the back bottom of the charging case to charge your iPhone 6sPlus/6Plus/7Plus/8Plus..
  • ※【360° PROTECTION】※ ① The iPhone 6s+/ 6+/ 7+/ 8+ battery cover is not only a portable charging case, but also a 360° protective case for cellphone from scratches and other daily wear and tear.(Not include phone screen)② Internal high quality chips also protect your iPhone 6sPlus/6Plus/7Plus/8Plus from overheating, short-circuiting and over charging..
  • ※【PLEASE NOTES】※ ①For iPhone 6sPlus/6Plus, Compatible with traditional 3.5mm lighting headphones or wireless Bluetooth headphones to listen to music. ②For iPhone 7Plus/8Plus, ONLY works with Apple Airpods or other wireless Bluetooth headphone. Not compatible with iPhone lightning he....
Check Stock