PIILOO High Pressure Oil Pump HPOP Master Service Kit with O-Ring Seals & Base Gasket Compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004

  • APPLICATION–Perfectly compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004. (Part Numbers ISK635, ISK617, ISK795, and TL3).
  • MATERIAL–High quality rubber material o-rings seal and high standard fittings and gaskets, durability, anti-wear, anti-tear, leakproof, corrosion resistance, and longer service life..
  • FUNCTION–A complete tool kit prevents oil leakage and help replace all seals and o-rings on the high-pressure oil pump, and reinstall the pump correctly..
  • KIT CONTAINS–2-Discharge port O-rings / 1-Rear Port Plug O-ring / 1-Non-Serviceable Port O-Ring / 1-IPR Valve O-Ring / 1-IPR Nut / 1-Fill Plug O-Ring/ 1-Non-serviceable port long threaded repair plug / 1-Replacement Check Ball / 1-5ml Thread Sealer / 2-Diesel High Pressure Oil Pump STC Fittings / 1-STC Quick Disconnect Tool / 1-High Pressure Oil Pump Mounting Gasket..
  • SATISFACTION–Goupgo offer 100% brand new and high quality High Pressure Oil Pump Service Kit to every customer. If you are not satisfied with the item, simply return it for a full refund within 30 days. Don’t hesitate to contact us if you have any questions..
Check Stock

94-97 Powerstroke 7.3 TP38 Turbo Cast Compressor Wheel DIY Upgrade Kit

  • Bigger 66/88mm cast compressor wheel provides much more airflow than stock 60/80mm compressor wheel and solves the commen surge problem.
  • Stepped Gap Ring eliminates oil leakage Problem.
  • 360 degree thrust bearing for performance applications.
  • Fit vehicle: 1994-1997 E&F Series with Powerstroke 7.3L diesel engine.
  • NOTE: You will need a 3.5″ intake hose to fit the new 3.5″ ported inlet Compressor Housing.
Check Stock

SUPERCELL 94-97 Powerstroke 7.3 TP38 Turbo Billet Compressor Wheel DIY Upgrade Kit

  • Bigger 66/88mm Billet Compressor wheel provides 33% more airflow than stock 60/80mm compressor wheel and solves the commen surge problem.
  • Stepped Gap Ring eliminates Oil Leakage Problem.
  • 360 degree Trust Bearing for performance applications.
  • Fit Vehicle: 1994-1997 E&F Series with Powerstroke 7.3L diesel engine.
  • NOTE: You will need a 3.5″ to 3″ Intake Hose to fit the new 3.5″ Ported Inlet Compressor Housing.
Check Stock

Cosmoska Red Aluminum Fuel Filter Cap w/ Pressure Port For Ford Power-stroke 6.0L 2003-2007

  • ▶The aluminum fuel filter fits for 2003-2007 Ford Powerstroke 6.0L.
  • ▶The oil filter cap will comes with schrader vavle, so you can tap right in to measure fuel pressure.
  • ▶Made of high quality CNC Aluminum, with great strength and durablity, rust-resistant, anti-corrosion, no deformation and no fade.
  • ▶It can be great replacement for the original plastic cap, comes with a test port which allows for a fuel pressure tester to be attached in order to properly check the fuel pressure.
  • ▶Package Included: 1 x aluminum fuel filter cap, 1x fuel rated Schrader valve and 1x O-ring(If you find the schrader valve or the o ring is missing, please directly contact us, we will give you a satisfactory solution).
Check Stock

6.0 Blue Spring Kit Upgrade,Ford Blue Spring Kit 6.0 Powerstroke Fits 2003 2004 2005 2006 2007 F250, F350, F450, F550- Replaces 3C3Z-9T517-AG Fuel Pressure Regulator Kit

  • Compatibility: The Fuel Regulator Kit fit for 2003 2004 2005 2006 Ford 6.0L Powerstroke F250, F350, F450, F550.
  • Functions of the 6.0 blue spring kit upgrade :increase fuel pressure 10-15psi ,increases fuel injector life of your Ford 6.0 Powerstroke..
  • Easy installation: complete kit with all accessories for installation, few minutes done..
  • Package including: blue spring upgrade+ fuel pressure regulator housing+4*rubber o-ring seals+ 3*orifice seals+4*screws.
Check Stock

Upgrade GTP38 Turbo for 99.5-03 Ford Powerstroke 7.3L Diesel 66/88mm Cast Compressor Wheel

  • 4″ Air Intake Hose included makes this Turbo as a Direct-Bolt-On Replacement, No Modifications are Needed..
  • Upgrade from stock 270 to 360 degree Thrust Bearing for better Lubrication, Stepped Gap Seal Ring to eliminate the problem of Oil leaking..
  • C.Wheel:66/88-94mm T. WHEEL : 78.7/68.6mm.
  • Fit Vehicle: 99.5-03 Ford E&F Series with Powerstroke 7.3 Diesel Engine.
Check Stock

PPE Heavy-Duty Ford Oil Cooler including Viton Gasket Kit (2003-2007 Ford Powerstroke 6.0L) - 314030310

  • Available for: Ford Powerstroke 2003-2007 6.0L.
  • Promotes more effective engine oil cooling.
  • Supplies cooler oil to your injectors and high-pressure oil pump.
Check Stock

Mishimoto MMHOSE-F2D-08BL Silicone Radiator Hose Kit Compatible With Ford 6.4 Powerstroke 2008-2010 Blue

  • Double O-ring design prevents air pockets from entering cooling system.
  • High grade silicone and heat-resistant embedded fibers feature max temp of 330°F.
  • Four 6061 aluminum CNC-machined couplers mate hoses to radiator.
Check Stock

Sinister Diesel Cold Air Intake for 2017-2019 Ford Powerstroke 6.7L

  • The Sinister Diesel 2017-19 Powerstroke 6.7L cold air intake (CAI) feeds your engine more air than the factory intake. Improved throttle response and turbo spool-up come from this cold air intake, enhancing performance in daily driving, towing and even racing applications!.
  • Precision CNC Mandrel Bent Aluminum Tubing for a Perfect Fit.
  • Oversized Long Lasting Reusable Cotton Filter Media.
  • Significantly Improved Throttle Response and Turbo Spool-up.
  • Polished and Powder Coated in our Signature Sinister Blue.
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock

BOXI 17117534896 Transmission Oil Cooler Replacement for 2004 2005 2006 2007 2008 2009 BMW 525i 530i / 2008-2009 BMW 528i / 2006-2009 BMW 550i / 2006-2010 BMW 650i (Replace # 1721753489602 376745751)

  • Direct-fit for 2003-2007 Ford 6.0L Powerstroke.
  • Replaces clogged or leaking stock oil cooler for renewed performance.
  • Included high-quality seals and o-rings ensure a leak-free fit.
  • Combine with the Mishimoto 2003–2007 6.0L Powerstroke Coolant Filter Kit and 6.0L Powerstroke Catch Can Kit for even more protection.
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number:3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock