Categories

Best Powerstroke Ipr Locations

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

  • ...ty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
  • Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then your IPR valve screen and seals may need replacing.
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement manufactured by AA Ignition and will fit, work and look exactly like the factory screen and seals found on your 6.0L Powerstroke vehicle. This kit also includes a socket tool specially made for removal and installation of your IPR valve which has a protruding electrical connector..
  • Lifetime Warranty - This replacement IPR tool and screen kit manufactured by AA Ignition comes complete with a lifetime warranty, if the parts fail simply contact us for a replacement. This is a complete kit which includes all the o-rings needed for a leak-resistant operation. Tak....
Check Stock

Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor

  • ...F-750 99-03, for Ford F-250 Super Duty 01-03, fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We will reply to you within 24 hours.
  • [Service + Package include] - You will get a 24-month shelf life for 7.3 IPR valve + ICP control sen....
Check Stock

gohantee 7.3 Powerstroke Fuel Injection Pressure Regulator IPR Valve with ICP Control Sensor and Pigtail Connector Compatible with Ford F250 F350 F450 F550 F650 F750, Replace# F81A9C968AA 1829856C91

  • 【FITMENT】The injector pressure regulator valve replacements for ford 7.3L powerstroke only - Fit for Ford E-350 Club Wagon 2003丨Ford F-250 F-350 F-450 Super Duty 1999-2003丨Ford F-750 1999-2003丨Ford E-350 Econoline Club Wagon 1997-2002丨Ford E-550 Econoline Club Wagon 2002丨Ford E-450 Econoline Super Duty Stripped 2001丨Ford Excursion 2001丨Ford F-650 2000-2001丨Ford E-450 Econoline Super Duty 2000丨Ford F-250 F-350 1997..
  • 【REPLACES PART#】 7.3 powerstroke IPR valve replaces part #: F81A9C968AA / AP63402 / F81Z9C968AA / F81Z9C968AB /F81Z-9C968-AB / F5TZ9C968A / 1829856C91 / 1836412C91 / 1841217C91 / 1841086C91 / CM5013 / CM-5013..
  • 【DURABLE + PACKAGE INCLEDE】 7.3L ipr valve fuel injection pressure regulator + ICP control sensor + pigtail connector kit have passed undergoes stringent testing to ensure high quality, durable and reliable under extreme conditions..
  • 【REPLACEMENT NECESSITY】The ipr valve can be located behind the engine attached to the high pressure oil pump (HPOP). It is a solenoid valve that allows high pressure oil to enter the injector by controlling the pressure in the high pressure oil system. Faulty IPR valve can lead to an unstable engine idle, stalling out, and losing overall horsepower..
Check Stock

OYEAUTO 6.0 IPR Valve Injector Pressure Regulator & ICP Control Sensor with Pigtail 5C3Z-9C968CA CM-5126 Compatible with Ford 03-10 6.0L Powerstroke Diesel Excursion F250 F350 F450 E350 E450

  • A Powerstroke engine utilizes an electromagnetic valve to regulate the high pressure oil pressure on the engine to tailor the injection characteristics of the injectors. This valve is called the Injection Pressure Regulator or IPR..
  • The IPR is located on the back of the high pressure oil pump, which is located UNDER the fuel filter assembly,down in the V of the engine.An IPR consists of two main parts: a pilot operated valve and an electromagnetic actuator..
  • Fitment:Compatible with Ford 2005 E-350 Club Wagon,2005-2010 E-350 Super Duty,2005 Ford Excursion,2005-2007 F-250 Super Duty,2005-2007 F-350 Super Duty.please check the year make model to make sure the IPR fit your car..
  • Replaces Part Numbers:5C3Z9C968CA,1846057C1,AP63417,CM-5126,5C3Z-9C968CA,CM5126..
  • Direct replacement part,IPR valve already comes with the new filter and o-rings installed..
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

6.0 IPR Valve Injector Pressure Regulator | Replacement for 2003-2010 F250 F350 F450 F550 E450 Super Duty Excursion, 04-10 E350 E450 | OE# 5C3Z-9C968-CA, CM-5126, 1846057C1

  • OEM FIT: If you are experiencing no-start, erratically idling or jerking, then you may have a problem with your IPR valve. This replacement valve has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective IPR valve.
  • PREMIUM QUALITY: Precisely manufactured internal valves, diaphragms and springs means you will get a fairly reliable IPR valve to perform excellently under all engine operating conditions, properly control the pressure in the high-pressure oil system.
  • FITS: Replacement for 2003-2010 Ford F250 F350 F450 F550 E450 Super Duty, 2004 2005 2006 2007 2008 2009 2010 Ford E350 E450, 03-10 Excursion. Since this IPR valve is a direct replacement for your factory 6.0 powerstroke IPR valve, operation is quiet and without noise of regulator.
  • REPLACE OE NUMBER: 5C3Z9C968CA, 5C3Z-9C968-CA, 1846057C1, CM-5126, AP63417, HTV102. Robust diaphragm materials design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels.
  • 24-MONTH WARRANTY: If the fuel injector pressure regulator valve fails, cracks, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND.
Check Stock

GaofeiLTF 6.0 Fuel Injection Pressure Regulator Valve & Sensor IPR & ICP for 2003-2010 Ford F250 F350 F450 E350 E450 6.0L Powerstroke Diesel Excursion

  • IPR & ICP - 6.0L Powerstroke IPR Valve / ICP Sensor Kit work together as part of a feedback cycle to control the oil pressure to the injectors in the high-pressure fuel system.
  • COMPATIBLE PART NUMBER - CM-5126, 5C3Z-9C968-CA, 5C349C968CA, 1846057C1, AP63417, W3250216, HTV102, CM-5054.
  • FITMENT - 2004-2010 Ford E-350 E-450 6.0L V8 Diesel Turbocharged.
  • 2003-2010 Excursion 6.0L V8 Diesel Turbocharged.
  • 2003-2010 F-250 F-350 F-450 F-550 Super Duty 6.0L V8 Diesel Turbocharged..
  • PACKAGE INCLUDES: 1x Fuel Pressure Regulator ( IPR ).
  • 1x Diesel Injection Control Pressure Sensor ( ICP ).
  • 24H CUSTOMER SERVICE - If you have any problems, do not hesitate to contact us, we’d love to provide a replacement or a refund..
Check Stock

7.3L Fuel Injection Pressure Regulator Sensor, IPR Valve & ICP Control with Electrical Connector Pigtail Wire Harness Sensor for Ford F-250 F-350 F-450 F-550 F-650 F-750 E-350 E-450 E-550, 1829856C91

  • ...F-750 99-03, for Ford F-250 Super Duty 01-03, fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We wi....
Check Stock

2 Wire Turbo VGT Solenoid & IPR Pigtail Harness Replacement for 6.0L Ford Powerstroke & Chevy GMC Duramax 6.6L

  • Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness..
  • Compatible with 6.0L Powerstroke Turbo VGT Solenoid (AKA Boost Controller) and IPR Valve 2003-2010 (2003 2004 2005 2006 2007 2008 2009 2010)..
  • Compatible with 6.6L Duramax (LLY/LBZ/LMM/LML/LGH) Turbo VGT Solenoid (AKA Boost Controller) 2004-2016 (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016)..
  • Female Socket 2-Wire Pigtail Adapter Connector Repair Harness Kit For Ford Power Stroke, Navistar, And GM Duramax Engines..
  • You will get: 1x Connector Adaptor Wiring Harness..
Check Stock

TR DIESEL 6.0 Powerstroke High Pressure Oil System IPR Air Test Tool Special KIT II

  • Powerstroke High Pressure Oil system and Air test Fitting.
  • Package Included 6.0 L IPR Valve Hose One fasteners Copper stamp One Valve Teflon tape.
Check Stock

7.3 IPR Valve Injector Pressure Regulator & ICP Control Sensor with Pigtail Compatible with Ford F250 F350 F450 F550 Super Duty E350 E450 E550 Excursion F650 F750 F81Z9C968AA 1829856C91 1841217C91

  • 【OEM Part Number】7.3 powerstroke IPR valve replaces part #: F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB,....
  • 【Fitment】For E-350 Econoline 1995-1998, E-350 Econoline Club Wagon 1995-2002, E-350 Super Duty 1999-2003, E-450 Econoline Super Duty 2000-2002,....
  • 【Premium Quality】IPR Valve Injector Pressure Regulator has Undergone A Rigorous Inspection To Ensure High Quality, Durable And Reliable Under....
  • 【Packge include】7.3L ipr valve fuel injection pressure regulator + ICP control sensor + pigtail connector kit, this have passed undergoes....
  • 【Notice】Please check the description and compatibility chart before your purchasing.Please contact us if you have any question regarding our this....
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock