4pcs 600mAh 1S 3.7V LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny Whoop FPV Racing Drone

  • ★Capacity: 600mAh 50C 3.7V,the 600mAh large capacity offers you a long flying time..
  • ★Light weight reliable,50C Discharge Rate,High-grade Lipo cell is highly reliable and durable for long-lasting use..
  • ★To fit for Mobula 7 HD Snapper7 Tinyhawk Freestyle Race Beta75 Pro Beta75S Eachine M80 Trashcan Kingkong Tiny 7 Inductrix FPV Plus 75mm FPV Racing....
  • ★The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop, mCPX..
  • ★Newly developed chemistry 1S Battery, Much more Safer, higher quality and more poewrful rate gives you higher speed flying experience..
Check Stock

GAONENG 6pcs 380mAh 60C 1S LiPo Battery 3.8V/4.35V LiHv Battery with JST-PH 2.0 Connector for UZ65 Tiny Whoop Micro FPV Racing Drone

  • The ultra 380mAh 1S LiPo Battery for Tiny Whoop Blade Inductrix(Need PH2.0 Upgrade)Quadcopter..
  • Battery Size:62*11*7.0mm, Weight: 8g/per unit, Connector: PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX.
  • The weight of the 380mAh 1S Lipo battery is 0.7g heavier than the 300mAh battery, better performance than it..
  • Newly developed chemistry 380mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation..
  • Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high....
Check Stock

Gaoneng 8PCS GNB 1S 3.8v HV 530mAh LiPo Battery 90C for PowerWhoop mCPX Connector EMAX Tinyhawk Brushless Drone Kingkong Tiny7 Beta75S

  • 【Specification】- Material: Lithium Polymer.
  • Max cont. Discharge: 90C, Max Burst(C-rate/current):180C..
  • 【Dimensions】- 60mm x 17mm x 6mm Appr.(L x W x H).
  • 【Application】- GAONENG GNB 530mAh HV LiPo Battery 90C/180C 3.8V is suitable for PowerWhoop mCPX Connector EMAX Tinyhawk Brushless Drone Kingkong Tiny7 Beta75S..
  • 【Voltage Note】- Be sure charging and use in safety. Do not leave when charging. In order to keep battery useful for long cycle life, do not overcharge more than 4.35V and do not over discharge below 3.4V..
  • 【What You Get】- 8 pieces GAONENG GNB 530mAh 3.8V HV Lipo battery. If you have any doubt, please don’t be hesitated to contact us, we will reply you within 24 hours..
Check Stock

Gaoneng 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60C/120C 3.8V with PH 2.0 Powerwhoop Connector for UZ65 US65 Tiny Whoop Drone Blade Inductrix

  • High capacity of 380mah 60C, Small size of 62 * 11 * 7mm, is the great choice of Tiny Whoop Blade inductrix.
  • The battery connector is PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX.
  • This 380mah HV 1S Lipo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit.
  • GAONENG 380mah Battery is Great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x.
  • Caution: As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
Check Stock

6pcs GNB LiPo Battery 1S 300mAh 3.8V HV LiHV 60c 120c Inductrix FPV BNF Blade RC Plastic Head PH2.0 Connector

  • 【Upgrade Version】Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7.
  • 【Small Size】Small size of 64 * 15 * 6 mm,The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it.
  • 【Better Performance】This 1S lipo tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops.
  • 【Longer Flying Time】Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
  • 【Caution】As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
Check Stock

Crazepony 4pcs 650mAh 1S Battery 3.8V/4.35V HV LiPo Battery JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone Like Mobula 7 Beta75Pro

  • This 650mah 1S lipo fit for Inductrix FPV Plus FPV Racing Drones.
  • Crazepony 1S Lipo Battery with the connector of JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX.
  • This Inductrix FPV Plus Battery discharge rate is 50C, Small size of 63 * 16 * 7 mm, Light weight of 13.68g, you can get 5-7 min of flight time and more power while staying at a suitable weight.
  • Newly developed chemistry 1S Battery, Much more Safer, higher quality and more powerful rate gives you higher speed flying experience.
  • Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction.
Check Stock

4pcs 520mAh 1S LiPo Battery 80C 3.8V HV LiHv Battery JST-PH 2.0 PowerWhoop mCPX Connector Upgraded for Inductrix FPV Plus EMAX Tinyhawk Micro FPV Racing Drone xt60 for Drone

  • Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, Eachine trashcan, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7.
  • This FPV 1S battery's discharge rate is 80C, Small size of 64 * 15 * 6 mm, Light weight of 13.42g/pc, you can get a long flight time and more power while staying at a suitable weight.
  • The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it.
  • Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
  • Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently. If you have any questions after receiving the package, please contact us as soon as possible.
Check Stock

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • Chipset: Intel Q57 Express chipset, Supported Processors: Quad-Core - Intel Core i7 series, Intel Core i5 series, Dual-Core - Intel Core i3 series, Intel Pentium, Socket Type - LGA1156.
  • Supported Memory: Type - DDR3 SDRAM (non-ECC memory only), Speed 1066 MHz or 1333 MHz, Connectors - four, Capacity - 1 GB, 2 GB, or 4 GB, Minimum memory - 1 GB, Maximum memory - 16 GB, Audio: integrated.
  • Video: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
  • 16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Proces....
Check Stock

Dell - Dell Dimension E521 305W Power Supp

  • 375 W Max Output | 100-120V or 200-240V Input.
  • Compatible Systems: For Dimension 9100, 9150, For Precision Workstations 380, 390, For XPS 400, Upgrade for Dimension 5100, E510, 5150, E520, E521, E310, 3100.
  • Compatible Part Numbers: P8401, K8956, WM283, UP173 | Model Numbers: L375P-00, N375P-00, PNL375P, PS-6371-1DF-LF.
  • Connectors: P1 - 24-pin ATX Motherboard Power, P2 - 4-pin ATX Power connector, P3 - 4-pin SATA standard power connector, P4 - 6-pin Dell proprietary connector, P5 - 4-pin SATA standard power connector, P7 - 4-pin Floppy connector, P8 - 4-pin Molex power connector, P9 - 4-pin Molex power connector, P10 - 4-pin Molex power connector, P11 - 4-pin Molex power connector, P12 - 6-pin PCI-E power connector.
Check Stock

BUIYLV 5.9' Portable Air Conditioner Exhaust Hose Connector, Round Tube Conditioner Adapter Exhaust Duct Vent Kit

  • Exhaust Hose Connector - Through the clockwise and counterclockwise threads of the connector, the connector is connected to the threaded hose.
  • the exhaust hose connector provides the best solution for letting the connector exhaust pipe through the wall or window..
  • 5.9" portable exhaust connector - This ac exhaust hose coupler is designed to be compatible with portable air conditioner exhaust hoses with an inner diameter of 5.9 IN (150 mm)..
  • Portable hose vent connector - Use this portable connector to extend the exhaust pipe, which can be used with both hands. Get started directly, without tools. This product is suitable as a spare tool, placed in a toolbox, and easy to carry..
  • High-Quality connector - The hose is made of ABS material, and the durable design allows it to be used for a long time. High-Quality Round Tube Conditioner Adapter Exhaust Duct Vent Kit.
  • Seal connector - The air-conditioning hose connector and the air-conditioning unit pipe are closely and safely matched to avoid any leakage or external debris entering, improving efficiency and saving power consumption..
Check Stock

Genuine Dell M1J3H 525w Watt Power Supply PSU for Precision T3400 Systems Compatible Part Numbers: M1J3H, 7JVXX, D525AF-01

  • Genuine Dell M1J3H 525w Watt Power Supply PSU For Precision T3400 Systems.
  • Connectors: P1 - 24-pin ATX Motherboard Power, P2 - 8-pin Motherboard Power Connector, P3 - 4-pin SATA Standard Power Connector, P4 - 4-pin SATA Standard Power Connector, P5 - 4-pin SATA Standard Power Connector, P6 - 4-pin SATA Standard Power Connector, P7 - 4-pin SATA Standard Power Connector, P8 - 6-pin Video Power Connector, P9 - 6-pin Video Power Connector, P10 - 2-pin Adapter Power Connector, P11 - 4-pin Floppy Power Connector.
  • Compatible Part Numbers:M1J3H, 7JVXX, D525AF-01.
Check Stock

Dell Dimension 2400 Motherboard K5148 G1548 C2425 F5949

  • Chipset: Nvidia GeForce 6150LE, Supported Processors: AMD Athlon 64 X2 dual-core processor, AMD Athlon 64 processor, AMD Sempron processor.
  • Supported Memory: 533-MHz, 667-MHz, 800-MHz (when available) DDR2 SDRAM, Four memory connectors, Capacity: 256 MB, 512 MB, or 1 GB non-ECC, Max Capacity: 4GB, Audio: Sigmatel 9227 CODEC (7.1 Channel audio).
  • Peripheral Interfaces: Video: 15-hole connector, Network Adapter: RJ-45 Connector, USB: Two front-panel and four back-panel USB 2.0-Compliant connectors, Audio: Six (6) Connectors for 7.1 support.
  • Expansion Capabilities: PCI Connectors: 2, PCI Connector Size: 124 pins, PCI Connector Data Width (Maximum): 32bits, PCI Express Connectors: one x1, PCI Express Connector Size: 36 pins, PCI Express Connector Data Width (Maximum): 1 PCI Express Lane, PCI Express Connector: one x16, PCI Express Connector Size: 164 pins, PCI Express Connector Data Width (Maximum): 16 PCI Express Lanes.
  • Compatible Part Numbers: YY838, DR830, CT103, UW457.
Check Stock

40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spektrum RC

  • Includes 20 sets servo male, 20 sets female connector, 20 sets red male SYP 20, sets female SYP connector, 3 meters long 22AWG cables, and a tweezers in one box. Easy to store.
  • The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable..
  • The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current.
  • Each set includes connector housing, protective connector housing and crimp pin connector..
  • The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing.
Check Stock