Categories

Best Praseodymium Alloy Sintering

Tungsten Alloy Rod - 2.000\ Diameter x 12\ Length, 90% Tungsten, 6% Nickel, 4% Copper

  • DENSE: 17g/cc - 90% Tungsten, 6% Nickel, 4% Copper alloy rod shipped to you free via Amazon Prime!.
  • SIZE: 2.000" dia. x 12" length with tolerance: (-0/+0.003" dia.) (-0" length).
  • QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B777.
  • FREE material cert will be provided with in safely packaged shipment.
  • UNITED STATES based manufacturing & customer service staff are here to help you.
Check Stock

Torrey Hills Tech Ground Microgram 0.1875\ Diameter x 12\ Length Tungsten Carbide Rod

  • DENSE: 17g/cc - 90% Tungsten, 6% Nickel, 4% Copper alloy rod shipped to you free via Amazon Prime!.
  • SIZE: 1.500" dia. x 12" length with tolerance: (-0/+0.003" dia.) (-0" length).
  • QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B777.
  • FREE material cert will be provided with in safely packaged shipment.
  • UNITED STATES based manufacturing & customer service staff are here to help you.
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

SH Scientific Laboratory Muffle Furnace SH-FU-5MGE (Tmax 1050℃/Continuous Running 900℃). 5L Chamber. Metal/Ceramic/Plastic/Titanium Thermal Treatment. Annealing/sintering/Melting/Combustion. 110V

  • Laboratory economic muffle furnace with flap door. Max temperature 1050℃. Recommended ideal running temperature is 850℃~900℃.
  • Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Heating from 3 sides and single housing.
  • Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
  • Light weight (22kg, 49lbs), 150x260x130mm internal, 5L, 1.5kW heater, 110V.
  • Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..
Check Stock

SH Scientific Laboratory Muffle Furnace SH-FU-3MGE (Tmax 1050℃/Continuous Running 900℃). 3L Chamber. Metal/Ceramic/Plastic/Titanium Thermal Treatment. Annealing/sintering/Melting/Combustion. 110V

  • Laboratory economic muffle furnace with flap door. Max temperature 1050℃. Recommended ideal running temperature is 850℃~900℃.
  • Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Heating from 3 sides and single housing..
  • Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
  • Light weight (19kg, 42lbs), 130x220x110mm internal, 3L, 1.1kW heater, 110V.
  • Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..
Check Stock

SH Scientific Laboratory Muffle Furnace SH-FU-11MGE (Tmax 1050℃/Continuous Running 900℃). 11L Chamber. Metal/Ceramic/Plastic/Titanium Thermal Treatment. Annealing/sintering/Melting/Combustion. 220V

  • Laboratory economic muffle furnace with flap door. Max temperature 1050℃. Recommended ideal running temperature is 850℃~900℃.
  • Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Heating from 3 sides and single housing.
  • Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
  • Light weight (34kg, 76lbs), 200x310x180mm internal, 11L, 2.8kW heater, 220V.
  • Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..
Check Stock

SH Scientific Laboratory Muffle Furnace SH-FU-3MG(Tmax 1200℃/Continuous Running 1000℃). 3L Chamber. Metal/Ceramic/Plastic/Titanium Thermal Treatment. Annealing/sintering/Melting/Combustion. 110V

  • Laboratory benchtop muffle furnace with swing door. Max temperature 1200℃. Recommended ideal running temperature is below 1000℃.
  • Heating from 4 sides and excellent temperature uniformity (+/-2.5%), double housing and low surface temperature (29~30℃ at 800℃).
  • Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
  • Light weight (34kg, 75lbs), 130x250x90mm internal, 3L, 1.4kW heater,110V.
  • Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..
Check Stock

SH Scientific Laboratory Muffle Furnace SH-FU-27MG (Tmax 1200℃/Continuous Running 1000℃). 27L Chamber. Metal/Ceramic/Plastic/Titanium Thermal Treatment. Annealing/sintering/Melting/Combustion. 220V

  • Laboratory benchtop muffle furnace with swing door. Max temperature 1200℃. Recommended ideal running temperature is below 1000℃.
  • Heating from 4 sides and excellent temperature uniformity (+/-2.5%), double housing and low surface temperature (29~30℃ at 800℃).
  • Water, soil, ceramic, metal, alloy, plastic and battery electrolyte analysis, heat treatment and innovation. Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer.
  • 114kg / 253lbs, 300x300x300mm internal, 27L, 4.9kW heater,220V hardwire.
  • Universal use for metal and ceramic heat treatment including annealing, sintering, melting, combustion, ashing and densification..
Check Stock

Megatron 4\ Diamond Cup Grinding Removing Disc Wheel for Concrete, Paint, Epoxy, Glue and Mastic with CDB Newest Technology (Megatron 4\)

  • CDB Technology - Cluster Diamond Brazing Technology, a new concept and invented technology of diamond segment production. The purpose of CDB product is to make high level grinding & coating removal, through molecular sintering method..
  • HIGH LEVEL GRINDING & COATING REMOVAL - Optimized design for high performance on grinding & coating removal. Works for concrete, asphalt, epoxy coating, tile glue, urethane and paint. Feel the finest surface grinding and removing..
  • FAST & LONG-LIFE - Longer working life with fast removing speed enables easy work and less working fatigue..
  • SPECIAL SHAPE & ANGLE DIAMOND BEADS - Excellent grinding & removing process by special shaped & angle diamond beads.
  • CLUSTER DIAMOND BRAZING TECHNOLOGY - Molded sintering and Single layer brazing creates solid shape brazed diamond tools. Molded diamond segments shows excellent performance with long-lasting life..
Check Stock

IntraMIN DRUCKER LABS - IntraMIN Unflavored - Trace Mineral Supplement for Immune System and Energy Support (32.oz)

  • WHOLE BODY WELLNESS SUPPORT: Our unique mineral supplement works to boost your body's natural immune support system. Filling in the nutritional gaps of your daily life for muscle function, endocrine, and brain activity. Used for overall head-to-toe health..
  • NATURAL NUTRITION: Our vegan formula is rich in carbon, oxygen, and fulvic acid and is easy to absorb without any harsh chemicals. The easy 1-ounce daily serving is safe to use every day as a perfect enhancer for your daily supplement routine..
  • INTRACELL TECHNOLOGY: Our groundbreaking intraCELL Technology is designed to ensure maximum absorption while preserving all the best nutrition. This helps our trace minerals and electrolytes reach our body's systems with the most effici....
Check Stock

Clevite MS-2199P Engine Crankshaft Main Bearing Set

  • Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
  • Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
  • Additional embed ability makes it a good choice for older engines.
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite MS-2202P Engine Crankshaft Main Bearing Set

  • Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
  • Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
  • Additional embed ability makes it a good choice for older engines.
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite MS-2328P Engine Crankshaft Main Bearing Set

  • Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
  • Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
  • Additional embed ability makes it a good choice for older engines.
  • Manufactured to meet or exceed OE specifications.
Check Stock