Best Precision Controls Water Heaters
Bostic Motors Inc. Power Badger Engine Block Heater Controller 1800US
- Saves energy and $$$...Usually pays for itself in just 1 season!.
- Senses outside temperature and adjusts firing time automatically.
- Rugged, water resistant design, made for cold winter conditions.
- Controls: block heaters, battery warmers, pad heaters/tank heaters.
Check StockPropane Tankless RV Water Heater, Camplux 2.64 GPM On Demand Hot Water Heaters for RV, 6,5000 BTU, Remote Control Included, White
- ...dy Temperature Control】Temperature ranges from 95°F-124°F. This rv propane water heater with temperature fluctuation eliminate technology which can eliminate the rise temperature to avoid scalding injuries, give you a comfortable bath even the water flow suddenly decrease to 0.4GPM. Staged combustion technology controls the amount of flame in summer, prevents the water from getting too hot,saves the limited propane gas available for caravan travel.
Check StockCash Acme Water Heater Tank Booster Pro, Thermostatic Mixing Valve 3/4
- COMFORT:Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters.
- PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.
- SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.
- COST EFFECTIVE: Adding a Tank Booster Pro thermostatic mixing valve to an existing water heater allows water to be stored at a higher temperature.
- SHARKBITE: use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing.
Check StockAmerican Water Heaters 6911131 Water Heater Gas Valve and Temperature Control Assembly Genuine Original Equipment Manufacturer (OEM) Part
- This part is compatible with models including.
- N30S61-303,N40T61-343,N50T91-403,N40T91-403,N40S91-403,N40S61-403,N50T61-403,N30T61-303,N50T61-504.
- Gas valve and temperature control assembly 6911131 supplies the burner with fuel to heat the water.
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: American Water Heaters.
- This gas valve and temperature control assembly (part number 6911131) is for water heaters.
- The temperature control thermostat controls the gas valve.
Check StockSUBURBAN MFG 521072 Gas Valve Solenoid
- Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units.
- Replaces SV9500, SV9501, SV9502, SV9601, and SV9602 controls as noted below.
- Ignition sequence includes timed trial for ignition.
Check StockTjernlund I Inline Draft Inducer Fan for Vertical Vent Systems for All Fuels
- Solves venting problems due to undersized chimneys, long vent runs, down drafts and negative pressures.
- Uses with Boilers, Furnaces, Water Heaters, Ovens, and Factory Processes.
- Can be used with multiple appliances (additional controls required).
- Vents/Chimneys utilizing In-Line Draft Inducers must be vertically terminated above the roof line.
- Should be paired with UC1, PS1505 and possibly other controls for safe operation.
Check StockTjernlund DJ-3 Inline Draft Inducer Fan for Vertical Vent Systems for All Fuels
- Solves venting problems due to undersized chimneys, long vent runs, down drafts and negative pressures.
- Uses with Boilers, Furnaces, Water Heaters, Ovens, and Factory Processes.
- Can be used with multiple appliances (additional controls required).
- Vents/Chimneys utilizing In-Line Draft Inducers must be vertically terminated above the roof line.
- Should be paired with UC1, PS1505 and possibly other controls for safe operation.
Check StockTjernlund D-3 Inline Draft Inducer Fan for Vertical Vent Systems for All Fuels
- Solves venting problems due to undersized chimneys, long vent runs, down drafts and negative pressures.
- Uses with Boilers, Furnaces, Water Heaters, Ovens, and Factory Processes.
- Can be used with multiple appliances (additional controls required).
- Vents/Chimneys utilizing In-Line Draft Inducers must be vertically terminated above the roof line.
- Should be paired with UC1, PS1505 and possibly other controls for safe operation.
Check StockHoneywell SV9501M8129 Gas Valve
- 1/2 in. NPT x 1/2 in. NPT Intermittent Hot Surface Pilot Ignition SmartValve Control with fast-fast opening and 3.4 in. wc pressure regulator setting.
- Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units.
- Replaces SV9500, SV9501 and SV9502 controls.
- Ignition sequence includes timed trial for ignition.
Check StockHoneywell SV9501M2056 Upgraded Replacement for Tempstar Furnace Smart Gas Valve
- Suitable for a wide range of gas-fired appliances including residential furnaces, roof-top furnaces, residential boilers, unit heaters, infrared heaters, space heaters and commercial cooking units.
- Replaces SV9500, SV9501, SV9502, SV9601, and SV9602 controls as noted below.
- Ignition sequence includes timed trial for ignition.
Check StockWeller PL113 PL Series Chisel Solder Tip, Thread-On for Standard and DI Line Heaters, 0.13'
- Thread-on and thread-in precision tips for standard & di Line heaters.
- Pl series tips are solid copper, plated with iron all over, precision electronic (Pl153 and # 333 tips are bare copper).
- Nickel and chromium behind the Working surface.
- Thread-on tips can be used with heaters 360, 362, 37Ug, 537S, 1237S & 4037S.
- Thread-in tips can be used with heaters 535S, 1235S & 4035S.
Check StockElectric Water Heater Tune-Up Kit, Includes Two 4500W 240V Water Heater Elements, Upper Thermostat, Lower Thermostat, Two Protective Covers, Two Elements Gaskets
- 【Application】Plumber's TOD Style Thermostats Kit provides a quick tune-up to prlong the water heater's life. The Tune-up Kits in Plumber's pack has good compatibility, fitting Most Electric Water Heaters..
- 【Thermostats】Contains Upper & Lower element thermostat with two protectors. 120V ~ 480V, Temperature Adjustment Range: 90F ~ 150F. Thermo-O-Disc(TOD) Style, can exchangeable with Apcom Style..
- 【Performance】KST series controls are designed to meet the high electrical capacity requirements of electric water heaters, using a temperature sensitive bimetal disc to deliver snap-action to the contacts. It has a long use time..
- 【Copper elements】Contains 2 high power density copper water heater elements 4500W 240V and 2 element gaskets..
- 【After-sales service】If you find any quality problems, please contact us in time to return the goods for a refund, we will try our best to solve it for you, please rest assured to buy..
Check StockRobertshaw 710-502 Low Profile mV Gas Valve
- Gas Valve Replacement: When you need to replace your B-67 gas valve, this compact, low-profile control designed for low capacity space heater applications fills the void where room is limited.
- Versatility: With an electrical rating range from 250 mV to 750 mV, this gas valve suits various gas types, including natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures.
- Features: RoHS-compliant 710-502 unit is equipped with three-position 1/2-inch outlets, 1/4-inch pilot outlet tubing, standard NEMA terminals, gas cock dial with off-pilot-on markings and an inlet filtered screen.
- Quality Warmth: Robertshaw makes reliable controls and replacement parts for furnaces, water heaters, burners and boilers, including thermostats, switches, ignitor and heat pump controls, gas valves, and more.
- Capability Sets Us Apart: Robertshaw is a global design, engineering and manufacturing company that sells product solutions and makes more than 10,000 sophisticated controls for commercial and home appliances.
Check Stock