Categories

Best Precision Current Transformer

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

  • 【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
  • The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
  • 【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • 【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
  • 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

Transformateurs

  • 4000 Watt Step Up/ Down Voltage Transformer- This step up transformer and step down transformer can be used for all electronics, household appliances....
  • Voltage Transformer - This power transformer can be used in 110 Volt countries and 220 Volt countries. It will convert from 110 Volts to 220 Volts &....
  • Fuse Protected Power Transformer - CE Certified. Full Range Fuse Protection, Full Range Over Current Protection. Fuse will cut off the current if the....
  • Built-in large-caliber heat dissipation, stable output, good heat dissipation performance, safety protection, and more stable operation. note: Make....
  • Best Service: Dual circuit breakers protective for each voltage that is safe operation. If you have any problem, please feel free to contact us, we....
Check Stock

HFBTE Large Caliber AC Leakage Current Meter Tester Digital Clamp Meter 0.00mA~2000A Measurement Range with RS232 Interface Data Storage Function

  • ❤❤(1)ETCR7000 Large Caliber Leakage Clamp Meter is specially designed and manufactured for measuring ac leakage current and current,Range: 0.00mA~2000A..
  • ❤❤(2)Large diameter 80mm × 80mm, can clamp 96mm cable or flat steel ground wire..
  • ❤❤(3)Adopting the latest CT digital integration technology and magnetic shielding technology, it is almost immune to external magnetic fields and has strong anti-interference ability, ensuring high precision, high stability and high reliability of measurement..
  • ❤❤(4)Especially suitable for cable leakage current and transformer grounding flat steel leakage current detection.) Automatic, can test one channel leakage current (current), convenient and fast..
  • ❤❤(5)The meter with the RS232 interface, can storage data 99 groups, systme software can upload storage data to computer, realize online real-time monitoring and historical query, dynamic display, with historical data reading, saving, printing and other functions..
Check Stock

AC Digital MultiMeter, DROK AC 40-300V 100A Multi Function Din-Rail Digital Energy Monitor, Kilowatt Voltage Current Generator Meter with Inner Transformer

  • Parameter --- Voltage Range: (110V 220V) AC 40.0-300.0V.
  • Product Size: 2.13x3.15x2.52in / 54x80x64mm.
  • Easy Operation --- One Button to Operate, Long press RESET for 5 second to clear energy..
  • Full View Screen --- Equipped with 178 degree LCD Digital Display Screen, get a clear view at any angle..
  • Built-IN Transformer --- This item has a built-in transformer, which is easy to wire..
  • Guide Rail Installation --- The MultiMeter can be guide rail, which is convenient..
Check Stock

Variable Electro-Chemical Etching Machine'The Personalizer Plus'

  • Add your custom logo to your knives, guns, tools, and jewelry by etching or oxidizing the metal!.
  • 18 volt transformer, Etch/Mark switches between 120V direct current and 60Hz alternating current, but the knob allows you to control the electric flow, and lights brighten/dim with the change in intensity, allowing for precision etching/marking. Safety fuse installed to prevent blowout from accidental circuit completion..
  • Comes with power box, one cathode applicator, one pack of 15 applicator pads, one bottle of SCE-1 eletrolyte fluid, one bottle of SCE-10 electrolyte fluid, one bottle of AMCE cleaner, one roll of stencil paper, one practice stencil, and instructions. Each item (except box and applicator) also sold separately..
  • Etches and/or marks just about any metal, in only a few seconds!.
Check Stock

Gikfun DIY 5A Range AC Current Transformer Module for Arduino Pack of 5pcs EK1344x5

  • It's diy kits, need to solder by yourself.
  • onboard precision micro current transformer.
  • the module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
Check Stock

Suraielec 200W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC Multi Tap, Outdoor Weatherproof for Landscape Lighting, Individually Controlled Outputs, Weatherproof

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Install】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Two mounting holes for hanging the transformer more steadily, compact enough for easy concealment after installation..
  • 【Memory Function & Works with Smart Plug】 The low voltage transformer retains pre-set mode memory after power outage, no need resetting. By switching it ....
Check Stock

Suraielec 120W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC, Landscape Lighting Transformer with 2 Independant Zones,Weatherproof for Pathway Lights, Step Light

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Memory Function】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Features memory function, transformer retains its last mode setting after power outage..
  • 【Multi-Tap Outputs & Overload Protection】120W landscaping transformer converts 120 volt current to a low voltage current ( Selectable 12V AC /15V AC), achieving a safe an....
Check Stock

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

PEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter

  • SMALL AND LIGHT: This current transformer Built-in input coil.
  • SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied..
  • MINI SIZE:This is a mini split base current transformer.
  • it's the smallest one compared to the similar products (output 100MA)..
Check Stock