Categories

Best Precision Forged Bevel Gear

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

OSOYOO Omnidirectional Mecanum Wheels Robotic Car Kit for Arduino Coding Students Based on Mega2560 Introduction

  • 【Precision die casting】The bevel gears are made of zinc alloy material by accuracy die casting.
  • 【Strong compatibility】The product can compatible with for FRC and other world robot competitions.
  • 【Good quality and durable】High wear resistance, high strength and high rigidity.
  • 【Easy to replace】Including 2 sets of bevel gear and bearings, convenient to replace.
  • 【Exquisite and reasonable】Fine processing and reasonable design, good accessories for industrial robots.
Check Stock

POPSUN Japanese Chef Knife, 8 inch Gyuto Chef Knife, Professional Hand Forged Kitchen Knives, High Carbon Stainless Steel Sharp Chef Knife with Solid Wooden Ergonomic Handle

  • ...ough knives in its class. The metal composition of the blade also contains 16-18.5% chromium. This gives it a glossy finish that will not tarnish even after using it for a long time.
  • COMFORTABLE HANDLE: The ergonomic handle of the Japanese chef's knife is perfectly balanced with the blade. This effectively increases precision and endurance, which reduces wrist tension and gives the user a safe, comfortable grip. The knife handle is made of Rosewood. This is a material that originates from Africa and is known for its comfort, strength and stability.
  • ULTRA SHARP KNIFE: All chef knives are precision heat treatment party and elaborately hand finished to polish within a staggering 13-15°degree angle per knife side. Greatly enhancing sharpness and toughness. The blade has an antioxidant protective layer applied to it so that while cutting, the meat and vegetables maintain their peak flavor.
  • EXCELLENT KITCHEN GIFT: Every home cook and professional chef looks forward to using sharp forged knives because they are made with premium materials and superior craftsmanship. The chef knife's double bevel makes it perfect for both left and right-handed use, making it the perfect gift for mother's day, father's day, wedding and birthdays.
Check Stock

Capri Tools 38749 Klinge 5-Inch Flush Cutter with Internal Spring Mechanism

  • Ultra fine cutting with internal spring mechanism for when precision truly matters.
  • Angled jaw for access into small areas, flush bevel for precise flush cut.
  • Patented internal spring handles are essential for delicate work.
  • Constructed of premium Japanese forged steel with state of the art heat treating process to ensure longevity of the pliers and cutting blades.
  • Induction-hardened cutting edges cuts through soft wire (1/32 in, 0.8 mm).
Check Stock

Cynamed Premium Nose Pad Optical Pliers Eyeglasses Repairing Plier Adjusting Optical Hand Tool

  • Lindstrom 8140 Oval Head Micro Bevel Cutters.
  • Forged from high-performance alloy steel which provides incredible impact resistance and resiliency..
  • Numerically controlled machine grinding guarantees edge angle accuracy and contact, increasing the tools reliability and consistency. Precision induction hardened edges 63-65 HRC, which ranks among the highest of any cutters made..
  • Screw joint that minimizes friction and maximizes alignment of cutting edges.
  • Cutters are treated and finished in Black..
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Misono Swedish Steel Dragon Sculpture Pieces Sujibiki No.122m / 27cm

  • HIGHEST GRADE CARBON STEEL ✅: Misono uses Swedish carbon steel, considered to be one of the purest form of carbon steel..
  • HAND FORGED ✅: Misono has professionals in Sakai city hammer the carbon steel sheets to strengthened the steel exactly like traditional Japanese....
  • RAZOR SHARP BUT ONE MUST TAKE CARE OF THEIR KNIVES ✅: Carbon knives are non stain resistant.
  • PRECISION ✅: The Sujihiki is a slicing knife intended for slicing boneless fish filets and proteins. The short height of the blade creates less....
  • EXCEPTIONAL SHARPNESS ✅: 70:30 Asymmetrical bevel. By concentrating the sharpening on the face of the blade at a steeper angle than on the back, a....
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Skilsaw 7.25 Inch Corded Magnesium Worm Drive Circular Saw with Diablo Blade

  • Die-cast aluminum motor and gear housings for durability.
  • Precision-machined, durable worm-drive gears for longer tool life.
  • Exclusive 53 degree bevel feature with 7 1/4-inch blade is ideal for angled cuts.
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock