Categories

Best Precision Mold Making

159Pcs DIY Jewelry Resin Casting Molds and Tools Full Kit, NANAPLUMS Silicone Molds for DIY Jewelry Pendant Craft Making Set Contains Resin Molds, Glitter Powder, Glitter Sequins and Tools

  • 【Two styles】- Our silicone ring molds include 7 different sizes of dome face rings and 7 different sizes of diamond face rings, you can choose according to your preference..
  • 【Sufficient Size】- This pakage include 1 resin ring mold, which length about 9.8 inch, and 2.6 inch width. The size of our mold satisfies most fingers..
  • 【Easy To De-mold】- The smooth surface allows the casting material to be fully cured and easy to release. Just pour the molten resin into the mold and wait for it to cool, then you will get a intact finished ring with complete structure. No sticking and no tearing, no need extra cutting and edging, very friendly to beginners..
  • 【Wide Range Of Use】- Our epoxy resin silicone mold can be used to make rings, pendants, earrings, keychains, jewelry crafts, etc..
  • 【High Precision Epoxy Resin Molds】- Our silicone molds for epoxy resin are made of high-quality and durable food-grade silicon. Soft, wearable, flexible, high temperature resistance. Precise making and it has high transparency..
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • 【MIX RATIO 1A:1B BY VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO ....
Check Stock

Silicone Mold Making Kit Liquid Silicone Rubber Bubble Free Translucent Clear Mold Making Silicone-Mixing Ratio 1:1-Molding Silicone for Resin Molds, Silicone Molds DIY (4kg/Gallon Kit)

  • Premium Silicone Mold Creation Material - Our translucent liquid silicone is a safe silicone material, non-toxic and no odor, very flexible, soft and clear with a shore hardness of 15A. To add color to your molds, you can mix the mold making silicone with mica powder to create a colorful mold!.
  • Easy Mixing & Pouring - This mold making silicone rubber kit includes part A and part B, the mixing ratio is 1:1. Pour the Part A and Part B together, stir the silicone rubber thoroughly for 5 minutes for best results. Working time of 5 minutes at room temp..
  • Various Applications - Pixiss silicone for mold making is very ideal for art craft use, DIY your own resin molds, wax molds, candle molds, use to make molds for resin, wax, soap, casting, etc. ATTENTION: DO NOT USE THIS MOLD SILICONE FOR FOOD. If you have any questions about our mold making kit please feel free to reach out..
  • Beginner Friendly - If you're interested in mold making, then look no further because our mold making kit is a perfect choice for you! No prior experience is necessary. Great activity to do with friends and family that you think would be interested in smooth on silicone mold making rubber. Cleaning Steps: If there's any spill, please clean with soapy water or rubbing alcohol..
Check Stock

Silicone Molds for Soaps 4oz, Square Soap Molds for Soap Making, Flexible Silicone Resin Mold for Homemade Craft

  • Food Grade: 12 bar silicone soap mold is made of 100% food grade silicone..
  • Mold Dimension: Each cavity size for the soap mold 2.6 x 2.75 x 1.25 in, Cavity Size: 4 oz..
  • Multipurpose: This Silicone mold can be used for soap making, candle mold, resin mold, baking mold and so on..
  • Easy to use: The square silicone soap making mold is easy release, clean and store away..
  • Best gift idea: DIY soap mold tray may serve as the gift for every creative person whose favorite hobby is soap making..
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • 【POT LIFE: 50 MINUTES, CURE TIME: 6 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
Check Stock

Resin Jewelry Making Kit 240 Pcs Silicone Epoxy Resin Mold Set Keychain Starter Kit Bundle with Resin Molds and Pigments Tools Included for Resin Beginners Adults Kids Jewelry Earring Keychain Making

  • 【Starter Kit】The jewelry mold starter kit is designed for beginners.The jewelry mold is very easy to clean and demold, this resin jewelry making kit is fully equipped with all the basic materials and accessories needed for resin jewelry making. You do not need to buy it separately.Not only that, the resin kit also includes disposable gloves and a plastic tablecloth to protect you from the process, even beginners and kids can easily use this resin jewelry mold kit to make their own resin jewelry..
  • 【A Riot of Colour】Every jewelry resin lover wants their work to have vibrant colors, so our jewelry resin molds kit comes with a variety of different colors of resin pigments and glitter, very suitable for resin mold jewelry beginners or experienced enthusiast,the pigment and glitter in this resin mold starter kit can mix well with resin ,just a little bit can render to a nice colour on your finished product from jewelry mold, and provide more possibility on your silicone resin jewelry..
  • 【High Quality Epoxy Resin】Each jewelry making kit include two bottles of resin solution, easy to mix, less bubble and odorless that you can be assured to use this resin jewelry making kit. This jewelry silicone resin is self leveling, ensure your finished product f....
Check Stock

LET'S RESIN Silicone Mold Making Kit 63.48oz/3.968lbs,Non-Toxic Mold Making Silicone Rubber, Platinum Silicone Mold Maker,Clear Liquid Molding Silicone Kit for Resin Molds, Silicone Molds Making

  • PREMIUM MOLD MAKING SILICONE MATERIAL: Our translucent clear liquid silicone are made by safe silicone material, non-toxic and no odor, very flexible, soft and clear. You could color the molding silicone with mica powder to achieve new colors..
  • EASY MIXING & POURING: LET'S RESIN silicone mold making kit are 2-part silicone including part A and part B.
  • the mix ratio is 1:1 by weight (digital scale is necessary). Pour the Part A and Part B together, then slowly stir the silicone rubber about for 5 minutes, make sure to stir the mixture thoroughly for better results. The working time of liquid silicone rubber is 40~50 minutes and the complete cure time is 8~15 hours at room temperature, it varies on your mold size and thickness..
  • NO BUBBLES: The bubbles of will automatically disappear within about 2 hours, no vacuum degassing is necessary. IMPORTANT TIPS: To reduce the micro bubbles, you can slow down the curing speed. You can put it in freezer for about 1 hour while curing, then take it out and let it cure in the room temperature. Do not warm up the silicone before use, as this will cause more bubbles..
  • GREAT FOR BEGINNER: If you're new to the mold making, our mold making kit is a perfect choice for you to try! No special skills or tools are needed. You c....
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • 【POT LIFE: 40~50 MINUTES, CURE TIME:4-5 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【SHORE A 15 & LOW VISCOSITY FOR EASY MIXING & POURING】this 15 Slow mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material to make a mold, no need degassing, the mold finished with Sipolysun Silicone Rubber has great flexibility and easy to demold, this silicone for mold making kit is the most suitable hardness for making DIY arts molds between 1cm to 20 cm..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Ou....
Check Stock

EchoDone Moon Face Silicone Mold for Resin Silicone Mold for DIY Jewelry Making, Candle, Artificial Gems, Polymer Clay, Cake Fondant Mold

  • ▶Handmade craft mold made of food-grade silicone. Food and non-food use separately. environmental friendly..
  • ▶Moon face mold outsice diameter is approx.9cm/3.5inch, Inside diameter is approx. 7cm/2.8 inch. Deep size is approx. 3cm/1.2inch. empty mold weight is approx.110g..
  • ▶Silicone mold temperature range from -40 to +446 degrees Fahrenheit (-40 to +230 degrees Celsius). Flexible and Non-Stick. Baked Goods Pop Out Easily, Microwave, Oven, Refrigerator, Freezer and Dishwasher Safe..
  • ▶Face shape silicone mold are widely-used, cake fondant mold, crystal jewelry making mold projects, isomalt making, chocolate candy baking, cupcake toppers decorating, polymer clay making etc..
  • ▶Package: 1 piece of moon face silicone mold with random colors..
Check Stock

LET’S RESIN Flexible Silicone Mold Making Kit, 43oz Liquid Platinum Silicone Rubber w/Mold Housing, Mixing Cups, Fast Cure Mold Making Silicone for Casting Resin Molds & Silicone Molds(Translucent)

  • 【All in One Silicone Kit】: This kit comes with 43oz silicone rubber, adjustable mold housing with maximum size 5.9” x 5.9”x 2”, stirring sticks x 5 pcs, 8oz plastic measuring cups x 5 pcs.
  • If you’re new to mold making, LET’S RESIN silicone mold making kit is a perfect choice for you to try, provide everything that you need to get started..
  • 【Fast Cure & No Bubbles】:This mold-making silicone rubber cures at room temperature or can be heated to cure faster. It has 30~40min working time and cures in 3-6h at room temperature 73.4℉/25℃, varying with your mold size and thickness..The bubbles will automatically disappear within 2 hours due to its excellent low viscosity feature, no vacuum degassing is necessary..
  • 【Premium Mold Making Silicone Materials】: Our translucent liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber....
Check Stock

EZETES Silicone Mold Making Kit, Translucent Liquid Silicone Rubber for Jewelry, Casting, Resin, Sculpture Silicone Molds, Soap, Candle Making - 21.16 oz - 1:1 Mixing Ratio Molding Silicone

  • FAST CURING & NO BUBBLES – Depending on the Size of Your Silicone Mold it takes up to 12 Hours to Cure Completely at Room Temperature. All Bubbles will Disappear AUTOMATICALLY within 2 Hours. In case of spill – Clean with Soapy Water..
  • LOVE IT OR LEAVE IT: We Provide Only the HIGHEST QUALITY Products. If You feel unsatisfied with our Silicone Mold Making Kit for ANY reason, We will Happily Refund Every Penny, and keep the Mold Kit as our Gift to You!.
  • MULTIPURPOSE APPLICATION – Our Silicone Mold Kit is IDEALLY SUITED for Making Unique Casting, Resin, Wax, Candle, Soap Molds – Your Imagination is Your Limit! Note: The Mold Making Kit is not intended for Food Purposed Silicon Molds..
  • PREMIUM SILICONE RUBBER MATERIAL – Our Mold Kit Translucent Silicone is COMPLETELY SAFE, NON TOXIC and ODOURLESS! Boost Your Creativity by Adding Mica Coloring Powder if you want to bring more Color to Your Silicone Mold.
  • EASY TO USE & GREAT RESULT – PERFECT FOR BEGINNERS! – Our Silicone Mold Making Kit includes 2 Parts of LOW VISCOSITY Liquid Silicone – 1:1 Ratio. Pour Part A and Part B Together and Stir Thoroughly, the Working Time is 5 Minutes!.
Check Stock

Resin Kits for Jewelry Making Silicone Molds Starter Kit 278 pcs Bundle with Epoxy Resin Silicone Mold Art Accessories Included for DIY Jewelry Earring Keychain Necklace Rings Making Adults Beginners

  • ... is very easy to use, even beginners can easily use this resin kit to make any crafts they want. Not only is this silicone mold very easy to demold without sticking and hard to tear, but also it is very easy to clean this resin jewelry mold after use. This resin mold kit is very suitable for beginners without resin making experience to practice jewelry resin making..
  • 【High Quality Material】Jewelry silicone molds are made of high-quality silicone, which is sturdy and durable and can support you to reuse the silicone mold for a long time, no need to worry about epoxy mold kit damage. Odorless and no deformation, to ensure that the finished product you make through the jewelry resin mold is smooth and tidy without a peculiar smell. This resin starter kit is very suitable for you to make jewelry for daily wear..
  • 【Variety Accessories】This resin mold starter kit includes a variety of accessories. These jewelry resin accessories can make it more convenient to make your own unique resin jewelry. The included sequins and glitter can provide diversity and creativity for your craft. This jewelry mold kit is perfect for you to make necklaces, earrings, rings, keychain and so on. Of course, this resin jewelry molds set is also the best gift for your childre....
Check Stock

LET’S RESIN 8oz Silicone Mold Making Trial Kit, Fast Cure Mold Making Silicone Rubber, Easy Mixing, Flexible Platinum Cured Molding Silicone for Casting Resin Molds & Silicone Molds (Translucent)

  • 【All in One Silicone Kit】: This starter kit comes with 8oz silicone rubber, stirring wood sticks x 2 pcs, 100ml plastic measuring cups x 2 pcs.
  • If you’re new to silicone mold-making and afraid to fail, LET’S RESIN silicone mold making trial kit is a perfect choice for you to try without costing you a lot, provide everything that you need to get started..
  • 【Fast Cure & No Bubbles】:This mold making silicone rubber cures at room temperature or can be heated to cure faster. It has 30~40min working time and cures in 3-6h at room temperature 73.4℉/25℃, varying with your mold size and thickness..The bubbles will automatically disappear within 2 hours due to its excellent low viscosity feature, no vacuum degassing is necessary..
  • 【Premium Mold Making Silicone Materials】: Our liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber for....
Check Stock