Categories

Best Precision Parts

Huanyu Jewelry Polisher Tumbler 3kg 6.6lbs Barrel Polishing Machine with 5-Stage Speed Regulation / Time for Natural Stone/Metal/Parts Polishing Chamfering Rust Removal

  • BARREL POLISHING: The most suitable polisher for intricate detail polishing, deburring, precision polishing, polishing of small parts, rust removing polishing, and surface polishing. From precision parts to small parts, irregular accessories such as metal, gold, silver and copper, rings, natural stones, etc. can be polished with a margin.
  • MULTIFUNCTION: Automatic forward / reverse / rotation switch, 0-60 minute time setting and 5-step speed adjustment of 150-800 rpm. You can finely polish parts.
  • SMALL SIZE: Capacity: 3 kg. Polishing tank: 100 * 135 mm, entrance 8 cm. Includes 450g polishing ball.
  • EASY TO USE: Just put a polishing ball, half water, and accessories in the polishing tank and set the time and speed. No artificial controls are required during use.
  • HIGH QUALITY: Acrylic polishing tub, aluminum alloy body, wear resistant and can be used for a long time..
Check Stock

Dell 180W AC Adapter for Dell Dell Alienware 15 R1, R2, Dell Precision 7510, M4600, M4700, M4800

  • Genuine Dell 180W Replacement AC Adapter for Dell Alienware 15, Alienware 17 R2, Alienware M17, Alienware M17x R4, Alienware X51, Alienware X51 R2, Latitude E5470, Latitude E5570, Latitude E7240, Latitude E7440, Precision 15 7000 Series (7510), Precision 17 7000 Series (7710), Precision M2800, Precision M4600, Precision M4700, Precision M4800, Precision M6600, Precision M6700, Precision M6800, Inspiron One 23 (2350), Inspiron One 2320, OptiPlex 3011 AIO, Dell Alienware 15 R1, R2.
  • Dell Precision 7510, M4600, M4700, M4800, 100% Compatible with Dell P/N: WW4XY, 0WW4XY, DA180PM111,FA180PM111 ADP-180MB B, DW5G3, 0DW5G3, 74X5J, 074X5J, WW4XY, TW1P0, F0G4K, JVF3V, 331-1469, 331-7957,.
  • Input Voltage 100-240VAC 50/60Hz, Output:Max 180W.
Check Stock

Starrett Air-Hardened A2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1 1/2\ Width, 1/8\ Thick, 18\ Length

  • Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
  • This steel can be carburized or case hardened After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
  • The Starrett Company uses its own ground flat stock for many of its precision tool parts.
  • Full-length identification eliminates confusion with other steels.
  • Starrett A2 Tool Steel precision ground flat stock is a 20 carbon fine-grained, killed steel, which can be carburized or case hardened very similar to AISI 1018.
Check Stock

LUDSUY Black Bronze Mouth Cup Double Cup Holder Copper Cup Holder Rack Glass Couple Cup Creative Mouth Cup Holder

  • 4.Precision and rugged parts high strength, not easy to loose, durable.
  • 2.Complete accessories, ready to install.
  • 1.Strong practicality, no rust, no fading.
  • 3.High-quality, high-quality materials, polished and polished, long-lasting.
  • 5.Careful design, not only practical but also beautiful, perfect curvature, thick hand.
Check Stock

NORCOLD INC Norcold 624864 Clear Door Bin

  • FULLY DEVELOPED STRUCTURE – Constructed from industrial grade and quality coated materials. Assembled to provide every user with the advantage of mobility and functionality..
  • INTERIOR FITTED – Developed to offer precision fitting for lower and upper refrigerator doors with smooth interior lining. Designed with a clear structure for easy visual and complementary look..
  • MODEL AND UNIT CONFIGURED – Engineered to fit Norcold N6/N8/N1095 model Refrigerators. Offers the necessary function to ensure every system is in maximum operational condition..
  • ORIGINAL EQUIPMENT MANUFACTURER – This replacement part is a OEM part designed to deliver you with a reliable and high-performing product..
  • SUPPLIES AND PARTS FOR MOTORHOMES – Manufactured with high-grade precision by Norcold Group. A full line of Norcold accessories and replacement parts are also available..
Check Stock

3M Cubitron II Cloth Belt 984F, 60+ YF-weight, 2 in x 72 in, Film-lok, Single-flex

  • 3M Precision-Shaped Grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivity.
  • Engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracks.
  • Reduces changeouts and downtime in robotic and pressure-assisted applications.
  • Belt life is significantly longer, producing more parts per belt and requiring fewer belt changes.
  • YF-weight backing excels in medium/high pressure stainless, cobalt chrome and nickel alloy applications.
  • 3M Precision Shaped Grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivity.
  • Precision Shaped Grain requires less pressure, which can mean less operator fatigue.
Check Stock

EZGO Electric 2000-Up Pds TXT Golf Cart Freedom High Speed/Upgrade Chip

  • Allows your PDS (Precision Drive System) cart the ability to increase its overall speed without the high cost of upgrading your controller or motor!!!.
  • Our parts meet or exceed OEM quality standards. All of our parts are backed with 100% satisfaction guarantee!! What more could you ask for??.
  • PDS carts have a controller with a plug chip slot and a Forward/Reverse control that is mounted on the dash and not a lever mounted under the seat by....
  • Fits the Following Cart(s): EZGO Electric 2000-Up 36 Volt TXT golf carts with the PDS (Precision Drive System) Only!! Will not fit on carts with a DCS....
Check Stock

JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder

  • Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
  • This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
  • Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
  • Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
  • Silver parts are made of aluminum, The black part is made of iron.
Check Stock

My Weigh Digital Counting Scale Pack White

  • 30, 000 gram capacity. Weigh up to 30, 000 grams with 0. 5 gram resolution for your kitchen, home, business, or classroom needs. Rechargeable battery and AC adapter included..
  • Five weighing modes. The CTS-3000 Digital counting scale features the following weighing modes: grams, ounces, kilogra, pounds, and counting mode..
  • Precision sensors and microchip technology. This My Weigh professional counting scale features precision sensors and the latest microchip technology specifically designed for accurate weighing and counting..
  • Three backlit displays. See the total weight, unit weight, and number of pieces All at the same time with easy-to-read backlit displays on the front of the scale..
  • Tare and counting check. Use the Tare functionality to place a container on the scale platform to steady your parts, and utilize the counting check feature to audibly alert you when you have gone over a certain quantity of parts..
Check Stock

The Happiest of Hours: Key West, Florida

  • High Precision: Perfect alignment between the handgrip and muzzle and riffle structure ensure high precision..
  • High Speed: The shaft is of moderate weight. Powered by high strength rubber band, it flies in a high speed..
  • Long Distance: Up to 30-50 meters(hunting with ammo). 20-30 meters (fishing with shaft) with high precision..
  • Long Durability: Aircraft grade aluminum and plastic body and parts are perfect for anti-rust and anti-corrosion. Steel ammo.
  • Flexible Configuration: Fishing wheel and sight scope are equipted to improve accuracy and convenience..
Check Stock

Bike Cable Cutter Heavy Duty Stainless Steel Aircraft Up To 5/32\

  • PRECISION WIRE NIPPER: It is handheld pliers made in Japan. Ideal for hobby, crafting, jewelry making, fishing, making model kit, assembling electronic components, repairing medical equipments, etc..
  • QUALITY JAPANESE STAINLESS STEEL: TOP uses only high-quality Japanese stainless steel. It is rust-resistant, has excellent wear resistance, and promises excellent sharpness..
  • POLISH FINISHED SURFACE: The metal parts are finished smoothly with barrel polishing and do not damage the work area's equipment and parts. It is a professional tool ideal for precision work..
  • SOFT SPRING LOADED HANDLE: The handle is a soft type that fits your hand. It is equipped with a spring that does not get tired even if you hold it repeatedly..
  • PRODUCT SPECIFICATIONS: [SIZE] 4.5 inches / [WEIGHT] 1.5 oz / [BODY] Japanese stainless steel / [GRIP] PP / [MANUFACTURED] JAPAN.
Check Stock

Erie Tools 7 x 14 Precision Bench Top Mini Metal Milling Lathe Variable Speed 2500 RPM & Digital Readout with 5 pc. Cutter Kit

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock

DELL FHMD4 DELL FHMD4 PA-9E AC Adapter GA240PE1-00 19.5V 12.3A 240 Watt

  • Genuine Dell-branded parts undergo rigorous testing by qualified engineers to ensure compatibility and reliability in your Dell system..
  • Dell’s sustaining qualification process allows for testing and certification of the newest technology on your Dell system..
  • Quality: Dell uses only OEM grade quality components..
  • Genuine Dell-branded parts mean that you will not need to worry about voiding your system’s hardware wa rranty..
  • This product is compatible with the following systems: Precision 7520.
Check Stock