Best Precision Shim Set Pack

Acrylic Guide Punch and Die Panel Replacement Part Only for Jounjip Truepower Harbor Freight 9 Piece Punch And Die Set

• See What You Cut- Clear plate guide to easily align coins, metal, leather to make precision hole punches.
• Easy To Install- Simply unscrew the hex screws with provided hex key and replace old broken panel.
• Backed by Amazon's A-Z Guarantee with prime available and a 1 year manufacturer guarantee.
• Center the alignment punch set by inserting all 9 pieces through their respective holes.
• Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.

Oshlun SDS-0842 8-Inch 42 Tooth Stack Dado Set with 5/8-Inch Arbor

OSHLUN SDS-0630 6-Inch 30 Tooth Stack Dado Set with 5/8-Inch Arbor

• Diameter: 6 Inch, Dado Saw Teeth: 30, Arbor: 5/8 Inch, Chipper Teeth: 5.

Spicer Rear Axle Bearing and Seal Kit For 1997-06 Jeep TJ/w Dana 44 Both Sides

• replacement carrier shim kit for dana spicer 44 differential, 30 spline axles.
• Precision Machined for Specific Applications.

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

• Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
• This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
• Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
• Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.

Stainless Steel Shim Stock 304 Stainless Steel Shim Stock Roll Full Hard Temper 50 Long x 6 Wide x 0.001 Thick

• ✿---- Stainless steel roll shim stock is made of premium 304 stainless stell which has excellent corrosion resistance performance and widely loved by people..
• ✿---- Only corrosion-resistance is not enough, our stainless steel shim stock is also rustproof, high temperature resistance, duarable, it is the excellent material of industry or daily life..
• ✿---- High toughness is another highlights, stainless steel roll can be bent or cut, smooth surface without burrs, if you need it, please take it home..
• ✿---- Stainless steel roll shim stock size: 50" Long x 6" Wide x 0.001" Thick, hard and strong, widely used in applications where corrosion resistance is highly required..
• ✿---- Multifunction stainless steel foil plate sheet widely used for all kinds of gaskets,mechanical parts,electronic components,metal stamping parts,chemical equipment,machine repair and maintenance,precision machinery,and so on..

AHL Adjustable Valve Shim Kit 9.48mm O.D. for Yamaha YZ450F YZ450 F 2003-2012 (208pcs)

• OEM valve shim with high precision,fit the motorcycle perfect.
• High quality carburizing steel material to ensure its durability.
• 4 shim of each size from 1.2mm to 3.5mm in 0.05 increments,3.5mm to 4.0mm in 0.1 incremen.
• High quality with competitive price,satisfy all your valve maintenance needs.
• Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.

Spring Steel 1095 Shim Sheet Assortment Blue Tempered Polished Finish Spring Steel Shim Stock 0.004 0.008 0.015 0.02 0.024 0.03 Thick 6 Width 6 Length 6 Pieces

• ✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use..
• ✿---- Our spring steel shim sheet assortment including 6 popular thickness（0.004", 0.008", 0.015", 0.02", 0.024", 0.03" ）to meet your various need, great value and practical..
• ✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement..
• ✿---- Spring steel shim widely used in applications which high toughness and accurance are required. Such as machine installation and maintenance, mold setting, etc.
• ✿---- As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

• ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
• ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
• ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
• ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
• ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..

1095 Spring Steel Sheet, Blue Temper, AMS 5122/SAE 1095/AISI 1095/AISI 1095, 0.010\ Thick, 6\ Width, 25\ Length, Pack Of 2

• Made from a high carbon 1095 hardened and tempered spring steel.
• Precision Brand's blue tempered shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability.
• Material is preferred by tool and die makers for templates and shim applications where toughness and high fatique strength are required.
• Measures 6" wide by 25" long by 0.010" thick.

Handi-Shim, White HS1840WH Plastic Construction Shims/Spacers, 40 Pack, 1/8-Inch, 40, 40 Count

• Cost 20 Percent less than the average shim and are available in four color-coded thicknesses and 15 combinations of sizes and quantities.
• Handi-Shims form a secure, flat base with only one shim (not needing to overlap two wedge-shaped shims).
• Made of plastic, Handi-Shims resist compression, will not rot, and can be reused in many applications.
• Handi-Shims can serve as high-precision spacers and scribes.
• Handi-Shims can be easily and neatly cut into smaller units for small-scale jobs and can be easily secured using a pre-drilled screw hole.

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

• Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
• Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
• Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
• 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
• Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..

Hot Cams DB Electrical HCSHIM02 Complete Shim Kit Compatible with/Replacement for Arctic Cat ATV DVX 400 /Honda CRF 450R CRF450X TRX 450ER TRX 450R /Kawasaki KFX 400 KFX 450R KLX 450R KX 450F/Suzuki

• Fits: Shims in each size 2004 - 2008 Arctic Cat DVX 400 Shim Kits ATV 2006 - 2014 Honda TRX 450ER Shim Kits ATV 2004 - 2009 Honda TRX 450R Shim Kits ATV 2003 - 2006 Kawasaki KFX 400 Shim Kits ATV 2008 - 2014 Kawasaki KFX 450R Shim Kits ATV 2006 - 2009 Suzuki LT-R 450 Shim Kits ATV 2003 - 2013 Suzuki LTZ 400 Shim Kits ATV 2004 - 2013 Yamaha YFZ 450 Shim Kits ATV 2009 - 2014 Yamaha YFZ 450R Shim Kits ATV 2010 - 2011 Yamaha YFZ 450X Shim Kits ATV 68-2072, 0925-0011, 560894, HCSHIM02, 18997-00, 870967.
• Replaces:Western Powersports 68-2072, Lemans 0925-0011, Tucker Rocky 560894, Marshall, Southern HCSHIM02, Advantage Performance 18997-00, Automatic Distributor's 870967 ".
• 100% New aftermarket unit built to meet OEM specifications.
• 1-year warranty protects you after your purchase.
• Factory direct pricing with no middleman markup delivers exceptional value.